|
mac wallet not working, can someone check?
|
|
|
|
|
is RVN coin down? Just disappeared from the x16r list, was there 1.5 hrs ago ?
|
|
|
|
just wanted to share my mining setup:
miner: enemy-1.10
5 - Zotac 1060 6Gb mini -pwl 80%, cc +110, mc +400
3 - Zotac 1070 Ti 8Gb mini -pwl 80%, cc +200, mc +500
hashrate between 75 and 82 Mh/s depending on RVN x16r algo
if anyone has a better setting/hashrate pls share it !
I have 8 1060 3gb inno3d with Samsung ram. Running at 65w Core +200, Memory +600 suprnova pool and using enemy miner 1.0.3 through SMOS. Getting 175-200 coins per day. Had it at 75w but didn't notice much of a difference as coins range between 175-200 per day anyway. As if profit calculation wasn't hard enough already, with RVN you get even bigger fluctuations because of the different algos it uses! I believe your best chance is to look at your hashrate from the miner's console (not the average but the moment's hashrate) and quickly apply different OC values. If you're lucky and the algo doesn't change until the next hashrate print, then you can see how much of a difference your OC values had. yeap, that's what I did with my nVidia cards and settings above are stable. My AMD cards are a mess, cannot find a stable settings, getting crashes, dead cards and so on. Still trying to figuring it out! |
|
|
|
|
I am trying to dual mine ETH and SmartCash and cannot find a stable clock settings for my RX 580 8GB.
Any suggestions for core and memory clocks, also dcri and ethi intensity?
thx
|
|
|
|
just wanted to share my mining setup:
miner: enemy-1.10
5 - Zotac 1060 6Gb mini -pwl 80%, cc +110, mc +400
3 - Zotac 1070 Ti 8Gb mini -pwl 80%, cc +200, mc +500
hashrate between 75 and 82 Mh/s depending on RVN x16r algo
if anyone has a better setting/hashrate pls share it !
anyone has some settings for AMD RX580 8Gb? I flashed my 470's back to stock bios than set my clocks at factory settings I'm using hiveos and my cards average 6-7mh. What are you getting per 1060/1070 if you dont mind hashrate between 75 and 82 Mh/s depending on RVN x16r algo |
|
|
|
just wanted to share my mining setup:
miner: enemy-1.10
5 - Zotac 1060 6Gb mini -pwl 80%, cc +110, mc +400
3 - Zotac 1070 Ti 8Gb mini -pwl 80%, cc +200, mc +500
hashrate between 75 and 82 Mh/s depending on RVN x16r algo
if anyone has a better setting/hashrate pls share it !
anyone has some settings for AMD RX580 8Gb? |
|
|
|
|
just wanted to share my mining setup:
miner: enemy-1.10
5 - Zotac 1060 6Gb mini -pwl 80%, cc +110, mc +400
3 - Zotac 1070 Ti 8Gb mini -pwl 80%, cc +200, mc +500
hashrate between 75 and 82 Mh/s depending on RVN x16r algo
if anyone has a better setting/hashrate pls share it !
|
|
|
|
sgminer 5.5.5-gm-a - Started: [2018-05-19 17:11:06] - [0 days 01:49:49] -------------------------------------------------------------------------------- (5s):17.37M (avg):14.07Mh/s | A:5546 R:33 HW:0 WU:25.154/m ST: 2 SS: 0 NB: 119 LW: 8218 GF: 0 RF: 0 Connected to stratum.minepool.com (stratum) diff 12 as user R......................... Block: 10c80012... Diff:20.6K Started: [19:00:43] Best share: 33K -------------------------------------------------------------------------------- [P]ool management [G]PU management [S ]ettings [D]isplay options [Q]uit GPU 0: 73.0C 1420RPM | 116.2K/1.435Mh/s | R: 0.4% HW:0 WU:2.577/m I:19 GPU 1: 74.0C 2024RPM | 7.547M/6.310Mh/s | R: 0.3% HW:0 WU:10.920/m I:19 GPU 2: 73.0C 421RPM | 7.855M/6.322Mh/s | R: 0.9% HW:0 WU:11.666/m I:19 -------------------------------------------------------------------------------- 3x MSI AMD RX580 Armor 8GB OC GPU 0 is not performing. I don't understand, all 3 GPU connected to same PSU Coolermaster 850w Gold, total system only draws 462W from wall. Windows 10 64bit, latest AMD drivers Adrenalin Edition 18.4.1 after a restart the first 30 seconds all GPUs perform the same then GPU 0 slowly drops hashpower Update: tried Avermore 1.4.0 miner, same problem Update2: after complete restart of system, it gets even more weird: GPU 0: 72.0C 1129RPM | 5.625M/5.666Mh/s | R: 0.0% HW:0 WU:8.768/m I:19 GPU 1: 74.0C 1511RPM | 5.636M/5.673Mh/s | R: 3.4% HW:0 WU:9.964/m I:19 GPU 2: 54.0C 0RPM | 2.711M/1.149Mh/s | R: 0.0% HW:0 WU:3.587/m I:19 GPU 2 is now dropping hashpower  GPU 0 (and GPU 1) doing fine Could it be something with Motherboard BIOS ? I used 3 1080TI GPUs in the past on the mobo wothout problems, maybe these "new" card give some trouble in combination with mobo? Asrock 970 extreme 4 got same problem and it should be related to OC, so lower your OC and find the right settings for mining. |
|
|
|
|
I trying to figure out the best settings for mining with my nVidia cards.
Since X16r has several algo I am assuming that both core and memory OC is good, anyone know which is more predominant ?
thx
|
|
|
|
|
time to add new algo to dual mine other coins.
|
|
|
|
|
hello,
maybe is time for adding more coins/algo for dual mining?
|
|
|
|
|
why I cannot trade on exchanges?
|
|
|
|
|
Hi,
the tool looks interesting but it does not increase submitted valid shares which are the important part vs hash rate!
It needs to be integrated with a miner to use the increase in hash rate to increase in valid submitted shares.
|
|
|
|
|
so can I sell my ETHF coins?
which exchange is working?
|
|
|
|
|
I have pretty much the same, but if the sgminer does detect GPUs it does not matter which command you pass !
what do you get if you so sgminer -n ?
|
|
|
|
cannot detect GPUs error, other sgminer works fine, avermore for amd has same issue: I am on Windows 10 [18:38:33] CL Platform vendor: Intel(R) Corporation [18:38:33] CL Platform name: Intel(R) OpenCL [18:38:33] CL Platform version: OpenCL 2.0 [18:38:33] Error -1: Getting Device IDs (num) [18:38:33] clDevicesNum returned error, no GPUs usable [18:38:33] 0 GPU devices max detected For avermore I use --gpu-platform=1 in the coomand line and it works. It will probably work on other sgminers. it does not work. The sgminer with option -n does not see the GPUs. I have other miners working fine but both these miners do not work. There are severl DLL included, maybe missing some or needed to be compatible with Win 10 64bit? |
|
|
|
cannot detect GPUs error, other sgminer works fine, avermore for amd has same issue: I am on Windows 10 [18:38:33] CL Platform vendor: Intel(R) Corporation [18:38:33] CL Platform name: Intel(R) OpenCL [18:38:33] CL Platform version: OpenCL 2.0 [18:38:33] Error -1: Getting Device IDs (num) [18:38:33] clDevicesNum returned error, no GPUs usable [18:38:33] 0 GPU devices max detected |
|
|
|
|
Hello,
I am investigating this coin:
would like to know what hashrate I should expect with 1060 and 1070Ti
which miner has the best hashrate?
any suggestion for a pool?
|
|
|
|
|
can someone suggest a pool to mine?
|
|
|
|
My 2 rigs were running this miner just fine until I added a new card to fill out the second rig.
Now only this rig is consistently crashing with the error:
Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 701 : unspecified launch failure.
I've tried removing OC, lower intensity and have had no luck. Both rigs are now at 6 cards mixing 1070TIs and 1070s.
Any ideas?
Thx!
Hi Friend , I also have the same problem , my rig has 8 cards 1070ti and the miner is krnlx/ccminer-xevan but in the last three days i have the same error,, Have you could to solve this trouble? Thanks if you could share something with me.  same issue with 1070TI freezing PC, fan 100% Any suggestions? |
|
|
|
|
Show Posts
