|
i started accepting crypto payments for my online business, a client paid me 110 USDT, i was unable to convert to BTC sadly using my wallet, and sendindg to kraken will take like 20$ fees (maybe more), what on earth am i supposed to do with those USDT to convert to fiat (as am paying my bills) without losing much of its value ?!?...
thanks,
|
|
|
|
If you know what's good for you don't buy that Power Supply, I used this PSU on my Vega 56 rig and it killed one of the cards, the voltages from the PSU 8pins are not correct so it send a high voltage to the GPU causing some artifacts on screen before I know what's going on its already too late
i recall red panda mining having tremendous issues with vega cards having several of them failing for unknown reasons NOT for using those PSU !... also how can newegg sell those GPUs if they are as cheap and bad as everyone else is saying here  i personally read so many good reviews, are you guys referring to the same model in the link or something else |
|
|
|
am seeing more and more positive reviews and haven't heard anyone so far claiming this PSU has burnt down his house ! https://www.newegg.ca/p/1HU-033V-00002reading further am reading this which looks promising !... Six protections: overvoltage, undervoltage, overcurrent, overload, short circuit, lightning protection. 2. Supports a full range of chip motherboards such as INTEL, AMDATI, Nvidia, VIA, and SIS. 3. Built-in PFC, magnetic amplifier circuit, suburban speed, low wave. 4. The power supply adopts the dual 12V design of INTEL12V 2.3 version. 5. Support INTEL and AMD quad-core CPU discrete graphics. 6. Support SATA and PATA multi-drive arrays. 8. Support wide power supply. has anyone tried this and is it obnoxiously loud .... |
|
|
|
Nice follow up. Good work with the pads.
many thanks indeed !...  |
|
|
|
here are my settings overclocking my FHR 3080, however the fan speed is usually at 90-100%, is that ok for the fan on the long run ?is it ok to keep fan on auto for 24x7 mining ?
http://grabilla.com/0bb1c-efa0c082-36cf-4b04-8dab-19f42d3bb499.pngalso is it ok to maintain 108c for memory temp to mine 24x7 or what temp to maintain for 24x7 mining ?...btw i finally figured it out i had some of the old thermal pads still used for some of the memory modules because i ran out of pads, ordered more pads (certainly one pad sheet is not enough) and now have ALL memory modules covered both FRONT AND BACK, i saw temps drop down to 76c on memory modules and couldnt believe my eyes for quite sometime till i was finally convinced those are real results ! so if u r still seeing temps at 90+c then you should know you didnt replace the pads correctly, i even used 2mm+1mm for BACK thermal pads (ignore that nonsense saying DO NOT do it and air will get trapped BS) as you can see i did that and used a premium thermal pads (thermal right) and i couldnt be more happy with my temps !!!!!!! 76c down from 106c !!!!!! plz do this with caution it took me almost 45minutes for this job and dont rush it and avoid electrostatics by continuously touching a metal thing next to u to periodically remove any electrostatics from your body, or wear a electrostatic wrist in your hand to avoid bricking your card and place your card on a NON CONDUCTIVE matt or something... i can confirm for my gigabyte aorus master 3080 i needed 2mm front and 3mm back nothing more nothing less !!..... and now am getting 80 c temp @ 80% fan only while overclocked to 1300 MHz and 63% power limit @ 100mhs for ETH !!! |
|
|
|
türkiye'de nicehash ile sorun yaşayan var mı? son zamanlarda nicehash çalışmayı durdurdu sanırım TürkTelecom engelledi !, herhangi bir düşünce ??... Google çeviri kullanıyorum  |
|
|
|
62MH is the highest probably the safest for 3060ti, anything over 62 will cause loss in hashrate and produce more heat, things are working perfectly the way they should so don't bother Ocing any of these cards, a 3070 can do 62-64MH depending on the memory chip in the GPU but 2MH isn't worth the hassle
i went 1400 on the memory for the 3060 Ti and 3070s am not seeing loss in hashrate by safest what r u referring to ? http://grabilla.com/0bc05-2bda9682-5b62-487d-a43e-87915051afb2.pngand temps r so cool i just decided to set the fans at 70 coz they were running on 50-60% range on AUTO. |
|
|
|
Yes, although I'm not sure if your gpus uses 1.5mm, you need to check threads specifically about the gpu you have to see if the size is right. will probably measure them before applying them |
|
|
|
i spent sometime playing with my 3070 and 3060 Ti rig and see how low we can go on PWR and high on OC, anyways here are my results: http://grabilla.com/0bc03-1fae8710-24c3-483e-8adb-9d753a7a0b32.pngis 1300 MHz fine for those small zotac 3070/60 Ti ? sadly we dont have mem temps ! but backplate temp is 40c and when on Auto Fan profile fan spins as low as 40 or 50%, are we doing fine for 24x7 mining ?? how high can the OC go for memory on those cards ? thanks, |
|
|
|
Is this because my card is not using thermal pads ? Its the gigabyte 3080 MASTER, or because they r using crappy ones ??
It is believed that the manufacturer does this on purpose so that the miners disassemble the video card and void the warranty. Now the choice of video cards is not large, but miners have several options: change thermal paste and thermal pads or use closed cases for more powerful cooling of video cards. yes, usa consumers are protected though, most around the world no, I mean to put 2w thermal pads in a 1000 usd gpu is disgusting, minimum should be the best, for them to put a good one would cost at most $5. I was able to source locally only thermal right pads supposedly a high quality selling at 20$ each They r rated at 12-13 wMk Thermalright Thermal Pad 12.8 W/mK, 85x45x1.5mm, Non Conductive Heat Resistance, Extreme Odyssey Silicone Thermal Pads for PC Laptop Heatsink/GPU/CPU/LED Cooler (1.5mm) https://www.amazon.ae/dp/B08CGVZ4YG/ref=cm_sw_r_cp_api_glt_i_BRTNZVVKWN0XAGVYVM0N?_encoding=UTF8&psc=1They will do ? |
|
|
|
The correct settings everyone else is using with this card are as follows:
Power limit : 75% 230 watt
Core clock : -200
Memory clock : +1200 max but even +1000 works ok just a few Mhsh less should be 95-96 Mhsh
These are windows settings,for Linux are the same just make sure you double the memory clock as in Linux that works differently.You should have a memory temp of 95 max by these settings.Just don't leave the card at the default settings as running 108 degree for an extended amount of time will make sure your card life span is less than what you expect.
Here is my setting, it is easily reach 103+ Mhs, mem temperature is 100C, fan speed 75% https://photos.google.com/photo/AF1QipPcNfn6kqjbZJWug64f9xG0gahuKyQvbxZeQRTIEveryone is saying to me 100c is not safe for 24x7 mining Am at 95c 100% fan and really worried Ordered a few pads they should arrive soon Gigabyte (since ever) is trash if u read newegg reviews on their liquid cooled cards even those got crappy pads and do thermal throttle, best IMO are Zotac and EVGA. |
|
|
|
Honestly I will never buy 3080 GPUs for mining cos watching them mine away with mem temp over 100°C is scary for a costly GPU, my finally stop is on 3070s and that's final, I'd rather go for A5000 If higher end mining GPUs is my aim
These video cards are not used in an open case with standard cooling. For them, you need to buy a closed case, and if possible, install additional cooling on the back of the video card and mine coins. The same is done with the RTX 3090. But if you do not want these problems, then it is better to buy the 3060/3070 series They r In an open case in my apartment and cracking the windows open and its 1c outside !! Also fans are there but not helping, I ordered some thermal pads they r poorly designed !
|
|
|
|
The high fan speed is not the problem, the heat causing the high speed is.
You need to improve heat dissipation and make some noise with large fans.
Or detune the GPU and lose performance.
he is not getting performance he is simply killing his gpu. at op lower the memory clock lower the power setting get the 108c to drop under 99c work at that and get back to us. Set the power to 225 or 230 not 250 set the ram to 1000 not 1300 see what happens also sorry i didnt want to open multiple threads, this is my other rig running a 1200w sea sonic PSU how are my settings looking ?? and can we go higher on those cards or not ?... http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.pngyou have 61mh on every card your watts are set around 130 that is pretty good. you could lower watts by 5 on each card and see if you stay at 61 mh. i do not see the ram settings sometimes they fail after a day of mining and revert back to stock clocks, even when i was doing just 60mhs  what reasons for that besides ram heating up ?? i noted here: http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.pngits 1300 for all cards, is it safe ? now trying to see if it is stable... note: i am on nicehash and i noticed when nice hash decides to mine on octopus (guess CFX) the 230 power limit for the 3080 is really insufficient giving me just 70 mhashes, how to go about that since nicehash decides automatically what ALGO to mine thanks, your ram is overclocked and over heats. this means shorter life. when you do nicehash you can do only eth with proper benchmark settings. are we doing ok now ? what is a safe VRAM temp for 24x7 mining on the 3080 ? Hypothetical question: can i increase to 1300 **STABLY** if the temps were in the safe VRAM temps for my 3080 ? am going on a 3 months vacation and keeping the rigs run 24x7, is it safe to keep at 100% fan speed ?... many thanks indeed,,,,those numbers are better. safer. try manually setting gpu fans to 90% and try adding a plug into the wall box fan to the mix. all in the name of keeping gear long lasting and cool. that 98 ram number is much safer than 104 to 110 r those normal results for a 3080 ?? i mean am at 666 for the mem and 59% power limit and my apartment is freezing cold in winter seriously i can get less than 95c~ AVG and 94 mhs max ! is 94c feasible for long term mining ??... |
|
|
|
Yes, pretty safe, is not lower than 80c but is within that orange line, memory temp less than 80c is green line, orange line is 80 to 95c, red line is from 95c to 110c, danger zone is beyond 110c. One 3080 I have uses 205w for eth at 98mhs, the other uses 224w 98mhs, both at 1100 memory and core clock around 1150mhz. Anyway I dont mine with them, just tests I have done in the past, I use them for something else.
thanks a bunch i have another thread for my 3080s sadly i cant get less than 98-100c and am at just 768 memory http://grabilla.com/0bb1e-4ecc6ebd-5ada-4850-9bf7-68e677e06eed.pngi even seperated the card in the rig for maximum airflow, the card just cant get any cooler, its winter now but it will get cooler soon ! am literally wearing a jacket in my apartment but that 3080 is at 98-100c, am i ok for 24x7 or what am i supposed to do now ?!?... You need this, https://www.amazon.com/Gelid-Solutions-GP-Ultimate-90x50x0-5mm-TP-GP04/dp/B0824ZN5BB?th=1 and then find a thread about your gpu on know how to do it and which one you will need it, some need 1.5mm, some need 2.0 mm and in some cases you will also need 3.0 mm. That will improve your memory temperature a lot. Sorry can I ask this, Is this because my card is not using thermal pads ? Its the gigabyte 3080 MASTER, or because they r using crappy ones ??
|
|
|
|
Yes, pretty safe, is not lower than 80c but is within that orange line, memory temp less than 80c is green line, orange line is 80 to 95c, red line is from 95c to 110c, danger zone is beyond 110c. One 3080 I have uses 205w for eth at 98mhs, the other uses 224w 98mhs, both at 1100 memory and core clock around 1150mhz. Anyway I dont mine with them, just tests I have done in the past, I use them for something else.
thanks a bunch i have another thread for my 3080s sadly i cant get less than 98-100c and am at just 768 memory http://grabilla.com/0bb1e-4ecc6ebd-5ada-4850-9bf7-68e677e06eed.pngi even seperated the card in the rig for maximum airflow, the card just cant get any cooler, its winter now but it will get cooler soon ! am literally wearing a jacket in my apartment but that 3080 is at 98-100c, am i ok for 24x7 or what am i supposed to do now ?!?... |
|
|
|
The high fan speed is not the problem, the heat causing the high speed is.
You need to improve heat dissipation and make some noise with large fans.
Or detune the GPU and lose performance.
he is not getting performance he is simply killing his gpu. at op lower the memory clock lower the power setting get the 108c to drop under 99c work at that and get back to us. Set the power to 225 or 230 not 250 set the ram to 1000 not 1300 see what happens also sorry i didnt want to open multiple threads, this is my other rig running a 1200w sea sonic PSU how are my settings looking ?? and can we go higher on those cards or not ?... http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.pngyou have 61mh on every card your watts are set around 130 that is pretty good. you could lower watts by 5 on each card and see if you stay at 61 mh. i do not see the ram settings sometimes they fail after a day of mining and revert back to stock clocks, even when i was doing just 60mhs what reasons for that besides ram heating up ?? i noted here: http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.pngits 1300 for all cards, is it safe ? now trying to see if it is stable... note: i am on nicehash and i noticed when nice hash decides to mine on octopus (guess CFX) the 230 power limit for the 3080 is really insufficient giving me just 70 mhashes, how to go about that since nicehash decides automatically what ALGO to mine thanks, your ram is overclocked and over heats. this means shorter life. when you do nicehash you can do only eth with proper benchmark settings. are we doing ok now ? what is a safe VRAM temp for 24x7 mining on the 3080 ? Hypothetical question: can i increase to 1300 **STABLY** if the temps were in the safe VRAM temps for my 3080 ? am going on a 3 months vacation and keeping the rigs run 24x7, is it safe to keep at 100% fan speed ?... many thanks indeed,,,, |
|
|
|
mem and power limit is high, I have 2 3080 and one work at 59 and the other works with 56, memory is a bit high too for 24/7, I would advise maximum 1000 - 1100 however as long as memory temperature junction is lower than 80c then is all right. About the hashrate, it seems all right.
thanks for ur reply, the reason i set the power limit high is because nicehash seems to prefer mining CFX (octopus) on this LHR card, and that needs 80% power limit from what i have read !... when i reduce power limit to 60s~ the hashrate will drop significantly !... my settings: http://grabilla.com/0bb1e-ad720e19-5534-4ffc-9bf2-1edd14383b63.pngi have few questions confusing me at this point... - Memory temp junction your referring to the temps right ? (am at 84c constant on this card even with ETH its in 80s)... - what is the safe temps for 24x7 mining ? thanks, |
|
|
|
|
i started mining with 3080 LHR card using nicehash, with NBMiner (ETH) i get around 67-69 mhs,
mem: 1300
pwr lmt: 68%
-200 core
my understanding NBminer has partial LHR unlock of 72%, so am i getting decent results ?...
|
|
|
|
The high fan speed is not the problem, the heat causing the high speed is.
You need to improve heat dissipation and make some noise with large fans.
Or detune the GPU and lose performance.
he is not getting performance he is simply killing his gpu. at op lower the memory clock lower the power setting get the 108c to drop under 99c work at that and get back to us. Set the power to 225 or 230 not 250 set the ram to 1000 not 1300 see what happens also sorry i didnt want to open multiple threads, this is my other rig running a 1200w sea sonic PSU how are my settings looking ?? and can we go higher on those cards or not ?... http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.pngyou have 61mh on every card your watts are set around 130 that is pretty good. you could lower watts by 5 on each card and see if you stay at 61 mh. i do not see the ram settings sometimes they fail after a day of mining and revert back to stock clocks, even when i was doing just 60mhs what reasons for that besides ram heating up ?? i noted here: http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.pngits 1300 for all cards, is it safe ? now trying to see if it is stable... note: i am on nicehash and i noticed when nice hash decides to mine on octopus (guess CFX) the 230 power limit for the 3080 is really insufficient giving me just 70 mhashes, how to go about that since nicehash decides automatically what ALGO to mine thanks, |
|
|
|
The high fan speed is not the problem, the heat causing the high speed is.
You need to improve heat dissipation and make some noise with large fans.
Or detune the GPU and lose performance.
he is not getting performance he is simply killing his gpu. at op lower the memory clock lower the power setting get the 108c to drop under 99c work at that and get back to us. Set the power to 225 or 230 not 250 set the ram to 1000 not 1300 see what happens also sorry i didnt want to open multiple threads, this is my other rig running a 1200w sea sonic PSU how are my settings looking ?? and can we go higher on those cards or not ?... http://grabilla.com/0bb1d-160323f9-8e38-4ca7-b06d-b2f37d6a27ef.png |
|
|
|
|
Show Posts
