foriegners dediğiniz tam olarak ne oluyor? şuan işletmelerde 1,10 tl evlerde ise 0,72-0,78 tl arasında değişiyor.
Hocam hangi ülkedesin bilmiyorum ama gelme boşuna Burasının ucu iyiye çıkmıyor

It seems bitcoin bullrun isn't done yet, adoption rates keeps growing almost everyday which can make this bull season last longer but mining isn't that reliable here because ethereum is the most profitable to mine but GPUs are too high in price and also EIP1559 is coming in July, too risky to invest on mining rigs right now, if you want to take risks it's better to buy BTC

If I were you and have $10k, I would not buy graphic cards to mining bitcoin or altcoin because that is not worth to do this day. Every coin's difficulty increases, which means we need to have high-end hardware to get good rewards from the mining. I prefer to use that money to trade because I see the chance to make a profit will be better now. Besides that, many coins can be the next potential coins that can increase in the short and long term, which can be my way to make a profit.

You aren't making any money until you make your ROI back in a short term possible, this is what makes mining sensible, just because I'm making some dollars everyday doesn't mean I'm in profits yet

First you need 2 pcie power splitter and the 009s riser is good, they had 2 led indicator 12v and 3.3v, keep in mind power splitter only max for 200w, and put on psu biggest cable, above 200w you got burned the cable, either you splitter or pcie psu

Yes you can use. But make sure 1molex to 1 riser.

Here are all the wattages of the 3 cables:

https://www.gpuminingresources.com/p/psu-cables.html

You mean six pin molex cable? Its way better than the sata to 6pin that follows the riser, if you look careful the 6pin molex has stronger wires than the cheap sata to 6pin cable

To be fair with you:
Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI  Breakout board + cable  for the card
+ a stupid PSU for powering just the risers. We pay electricity more than you do ....  but on top its a very clean installation

So, I will stop the order of the very nice but not so much pcie - happy psu.

The riser is good , btw

To be fair with you:
Isn't pretty but the normal solution is: Hp server PSU 1200 watt ( refurbished)+ 12 PCI  Breakout board + cable  for the card
+ a stupid PSU for powering just the risers. We pay electricity more than you do ....  but on top its a very clean installation

So, I will stop the order of the very nice but not so much pcie - happy psu.

The riser is good , btw

you might want to check this reddit thread about shopblt.

https://www.reddit.com/r/nvidia/comments/jbmh6m/has_anyone_used_the_shopblt_website_to_order_the/

honestly if you can get 3000 series cards at msrp buy them.

and let me know your source

Putting $10k into a rig right now would be the equivalent of lighting $10k on fire. Use that $10k to buy when crypto inevitably crashes again or wait until after a crash when things start picking up to mine some altcoin because by then ETH would be unmineable

$ 10,000 now costs 1 farm 3060ti * 6 video cards. But be careful with investments, because the new Nvidia models will be limited in Ethereum mining.
I will wait for a drop in prices for video cards and only then I will invest in mining. So far, I believe that the prices for video cards are very expensive.
It may happen that you invest $ 10,000 and the profit per day drops to $ 6 from 1 farm.

Yes 3 gpus are on risers 1 gpu on 1st 16x slot because this mobo and cpu dont give onboard vga. Psu is 1000w crappy huntek sliver psu but working.

Here is the manual for i believe your board. 

https://manualsbrain.com/en/manuals/1561180/?page=8

Shows expansion slots and what they do depends on the cpu you are running.

Can you advise make/model of cpu?  Some have 40 pcie lanes and some only 28...this determines how the slots on the motherboard are utilized.    Pay attention to the * and ** notes about the expansion slots. 


Looks like setting in bios of pcie slots to 8x8x8x8 would allow 3-4 gpus to run no issue.  But i suspect yours are x16/x8 meaning if you only have 28 lane proc....you are out of lanes.  Thus try 8x8x8x8 option and should boot.    For most mining x1 is plenty.

Let me know happy to help dig into it.

Do you have any M.2 Drive installed. A lot of boards will disable a slot if you use the M.2
No I dont !

Also have you tried putting the riser card in the 4th slot?
i tried 3x GPUs in the past and its fully supported in slots 1, 3, 5 and been working for years, just having a riser in the fifth wont post as u said
mobo manual: https://manualsbrain.com/en/manuals/1561180/?page=20

no i havent, should i ?? i tried in slot 6 and it never worked !

Try removing GPU2 and see if the riser + 1st gpu work together.

If they do then most likely its a pcie lane issue.
whats a pcie lane issue ?...

If you have both slot 1 and 2 as X16 you may not have the PCIE lanes.  For most mining x1 is fine.    Also looks like it may have 2 x1 slots can try those as well.


It appears it doesnt even complete post when it has all 3 currently plugged in.
funny thing when i have the riser on slot 5 and both GPU On Board in both 1 and 3, i will go to BIOS, BIOS will Identify all 3 PCI-E slots to have a GPU,