If Dev is active that doesn't prove that this is a good project!!! They themselves say that we do not have any road-map, I mean is this how a serious developer responds? More to that they ask you what should we do next(i would say send you coin to mars.. will you!!), i would say you better do something good to this coin and then tell in the forum that yes we are doing this and it will help us increase the price.
Till the time this coin was there in crytopia its was ok ok used to go up and down at least but now its dead. Cryptopia is not interested and not even listening to these people they are just trying and trying to bring back the coin in Cyrptoia since months.
This coin has more than half the coins on cryptopia has, I am not bothered by your comments. This coin went to 3 usd in december if fiat is what your looking for and trends. These networks as I mentioned need to be built over time, please take your attitude to some lame pump coin.
|
|
|
65k market cap, low coin supply... if we can put this project on feets... i mean hardly decent projects have market cap of 6m that is 100x, does this project have roadmap, how many devs are there...? I am interested to help this project as much as i can if it is not dead?
This project has never had a roadmap. We don't believe in promising to development, that should be a given in the crypto space. This has been continually dev'ed and worked on & not used to create a fake interest like you see with a lot of roadmaps designed to bring investors in for a spike in interest. These networks must be built strong over a long period of time and true in nature. So many times we see coins created with roadmaps bringing false hope. A community must be build over time and not just in it for the quick pump. If you have any suggestions for what you would like to see rolled out, please post here, talk in ccex trolbox or contact us. It will always be considered.
|
|
|
sudo apt-get install curl -y && curl -s https://crownvps.com/guidescripts/masternode.sh | bash -s PLACE-YOUR-MASTERNODE-GENKEY-HERE If this is current 100% and the masternode.sh has been updated on that server then I would say it is all current but am trying to get a confirm from the devs. Not newbie accounts ect.
|
|
|
CROWNFUNDING - A THANK YOU
Hi everyone,
First of all, we would like to thank you for your immense support and incredible generosity. Our crownfunding request reached 100% of its goal within the first 24 hours. It shows the passion that our community has for this project that we hold so dearly.
Let's start off by saying we're knee deep in non-disclosure agreements. We would love nothing more than to tell you who it is we're partnering with, but unfortunately we can't yet.
However, we can inform you that the crownfunding was started to generate funds for listings on NEW MAJOR EXCHANGES and some smaller exchanges that we see growth potential with too.
There is one exchange in particular we're already in discussions with, but any overflow will go into as many quality listings on major exchanges as possible. That is why the Crown team have decided to leave the donations page open for the time being. We cannot go into specific details but many of the major exchanges require large fees for a listing, regardless of project size or volume.
On a personal note, I often see community members asking if we are trying to be listed on certain exchanges. I wish I was able to respond but I cannot due to the various non disclosure agreements that I have signed. However, I assure you that I read and absorb all suggestions so please keep them coming.
The process of exchange listings can take up to 3 months, so please bear with us as we work on this.
We will, as always, do our best to provide you with as many updates as possible.
THANK YOU
The entire Crown Core Team
>>>>>>>>>>> https://crownvps.com/guidescripts/masternode.sh is this install script current (100%) ? <<<<<<< It is taken from here= http://op.crownlab.eu/projects/crown-atomic/wiki/masternode-setup-guide-windows-slash-linux-vpsMasternode Setup Guide (Windows - Ubuntu 16.04) which is from here: GuidesMasternode Setup Guide (Windows - Ubuntu 16.04)Systemnode Setup Guide (Windows - Ubuntu 16.04)Masternode Update Guide (Linux VPS)We have ran a bunch of masternodes from when masternodes started and have had a few attempts at re-setting up after your update, each time there's an issue with out dated install or wrong versions ect. Need a confirm on this asap as it has been costing missed mn rewards Thanks for pointing this out. This script should be working. So, the old install script on the old setup document works with the new updated source?
|
|
|
This is the same install script though. on both guides the old and new.
|
|
|
CROWNFUNDING - A THANK YOU
Hi everyone,
First of all, we would like to thank you for your immense support and incredible generosity. Our crownfunding request reached 100% of its goal within the first 24 hours. It shows the passion that our community has for this project that we hold so dearly.
Let's start off by saying we're knee deep in non-disclosure agreements. We would love nothing more than to tell you who it is we're partnering with, but unfortunately we can't yet.
However, we can inform you that the crownfunding was started to generate funds for listings on NEW MAJOR EXCHANGES and some smaller exchanges that we see growth potential with too.
There is one exchange in particular we're already in discussions with, but any overflow will go into as many quality listings on major exchanges as possible. That is why the Crown team have decided to leave the donations page open for the time being. We cannot go into specific details but many of the major exchanges require large fees for a listing, regardless of project size or volume.
On a personal note, I often see community members asking if we are trying to be listed on certain exchanges. I wish I was able to respond but I cannot due to the various non disclosure agreements that I have signed. However, I assure you that I read and absorb all suggestions so please keep them coming.
The process of exchange listings can take up to 3 months, so please bear with us as we work on this.
We will, as always, do our best to provide you with as many updates as possible.
THANK YOU
The entire Crown Core Team
>>>>>>>>>>> https://crownvps.com/guidescripts/masternode.sh is this install script current (100%) ? <<<<<<< It is taken from here= http://op.crownlab.eu/projects/crown-atomic/wiki/masternode-setup-guide-windows-slash-linux-vpsMasternode Setup Guide (Windows - Ubuntu 16.04) which is from here: GuidesMasternode Setup Guide (Windows - Ubuntu 16.04)Systemnode Setup Guide (Windows - Ubuntu 16.04)Masternode Update Guide (Linux VPS)We have ran a bunch of masternodes from when masternodes started and have had a few attempts at re-setting up after your update, each time there's an issue with out dated install or wrong versions ect. Need a confirm on this asap as it has been costing missed mn rewards
|
|
|
Please delete your quote of the ann, People should not be quote ann other than official devs as links can be changed within the quote , please anyone on bitcointalk as a rule do not use links from other members who quote or reference links or ann . No accusation just a rule of thumb.
Everything can be found on https://www.anarchistsprime.info
Hello ... no message of developers from days is there any upadte!!!! The price of the coin is on a lower side since so many days!! Is there any update!!! The ccex market is reopen https://c-cex.com/?p=acp-btcYou may want to check
|
|
|
Where can I download the latest ACP wallet version? When I go to official website I am told the latest version is ACP2.2qt however when I sync the wallet, on lower left I get a message stating this isn't the latest version. When I check the wallet version it says v1.1.1.0. Is there an error with the wallet download link, perhaps it says new version but still pointing to old wallet?
Please share the latest wallet link.
Thanks and have a nice day.
You are on the correct wallet I need to update the message displayed , The warning comes up when more that 50 of the last 100 blocks are version 2 myr-grs , meaning more people are mining myriad-groestl (gpu) than the sha256d at the moment. I will change the message displayed in the next update. As we are using a mix of bitcoin code, digibyte code, some dash code and myriad + some modifications of our own, things like this need to be custom changed also. I would like to highlight if any miners want another algo added please let us know here via email or ccex trolbox . We could look to adding another if miners/users want.
|
|
|
As we speak, the botnet hashrate seems to be higher than even the total MPH hashrate. They could potentially take over the network, right? Is anything being done to resolve this issue?
change the algo... do you know if it's going to happen any time soon? has anyone provided an explanation how they are able to exploit the current algo? The same as nicehash or miningrig rentals but basically you control a botnet and mine xmr or uhm zcoin xzc ... Simular coins appeal also so it isn't a surprise , could even be a good thing. This update is awesome https://twitter.com/zcoinofficial/status/952978796252024832 So much potential here going unnoticed under radar. Keep up the good work zcoin devs.
|
|
|
Zcoin Video Update - 13 January 2018- Pythia appointed for Zcoin marketing
- Increasing merchant adoption of Zcoin
- TOR integration
- Light wallet implementation and Insight
- Mobile wallets
- MTPv1.2 and discussions on Itsuku
- Initial MTP benchmarks
- Zachary Diebold joins the Zcoin team
- Update on ZEth
- Clarification on Zerocoin 'vulnerability'
- Understanding the November libzerocoin fix
- Recruiting developments on Sigma
- Reduced block times
- Seeking feedback on a tail emission
- Smart contracts capability
- Optimizing Zerocoin and recode update
- GUI conceptualization and rethinking "Mint, Spend, Repeat"
- Speaking or representing Zcoin
Nice update! Great to see true Anonymous sending
|
|
|
Hey Dev, so i have/had some ACP on Cryptopia, the wallet has been in maintenance for ages....are they lost then?
I have reached out to their support team recently & am waiting a reply.
|
|
|
Interesting coin you have here I'm very impressed with the track of development its on considering how low on the marketcap it is. I like hidden gems like this, if I may ask do you have a roadmap for 2018 in the works and a active dev channel in telegram or discord?
The team is usually very active within ccex trolbox , Exchange is reopen soon due to holiday period (full operations) You will find we are active within the community via that way and here on btctalk. As for "roadmap"The focus is to gather information from those within the community and continue development towards what people want long term. People want games, we made games, people wanted a different gui wallet that was done, we added myr-groestl to help decentralize away from sha256d asic only miners ect so it is now minable with sha256d+myr-grs . We have a white label solution for those who believe that the name is not ideal marketable : https://www.e-ledger.org/ The coin front end "could" operate under this name/ticker be marketed as such but the network would be the same and a choice to run the current Acp wallet would be totally in users hands. We are always open to suggestions and work towards a long term goal of growth rather than hype .
|
|
|
Trying from a direct git clone then compile will report back .
|
|
|
v0.12.3.1 is marked as pre release on github Just making sure we don't have to move our masternodes up to that version. https://github.com/Crowndev/crowncoin/releases/tag/v0.12.3.0 Going by github this is current but it's release was on nov 7th This can cause a lot of issues if that's not the place everyone should be running the masternodes. I hope the pools have the correct version inline with masternodes. Can someone in the team answer this please. We are making sure the masternodes we have will run. We are working on a new release with non mandatory updates (This could change). ofc, once the release is out we always recommend updating. v0.12.3.0 is current? That's correct Current release will always show This hangs on "loading wallet" I have a few masternodes to work on and they all are doing the same. Interesting. Has anyone else got this issue or has anyone reported this?
|
|
|
v0.12.3.1 is marked as pre release on github Just making sure we don't have to move our masternodes up to that version. https://github.com/Crowndev/crowncoin/releases/tag/v0.12.3.0 Going by github this is current but it's release was on nov 7th This can cause a lot of issues if that's not the place everyone should be running the masternodes. I hope the pools have the correct version inline with masternodes. Can someone in the team answer this please. We are making sure the masternodes we have will run. We are working on a new release with non mandatory updates (This could change). ofc, once the release is out we always recommend updating. v0.12.3.0 is current?
|
|
|
v0.12.3.1 is marked as pre release on github Just making sure we don't have to move our masternodes up to that version. https://github.com/Crowndev/crowncoin/releases/tag/v0.12.3.0 Going by github this is current but it's release was on nov 7th This can cause a lot of issues if that's not the place everyone should be running the masternodes. I hope the pools have the correct version inline with masternodes. Can someone in the team answer this please. We are making sure the masternodes we have will run.
|
|
|
Please delete your quote of the ann, People should not be quote ann other than official devs as links can be changed within the quote , please anyone on bitcointalk as a rule do not use links from other members who quote or reference links or ann . No accusation just a rule of thumb.
|
|
|
|