Now even with the 4th card taken off, the hash rate is still degraded I tried enabling gen 1 pcie speed in bios, no difference. Any ideas as to what the heck is going on? All the GPU are with the sam RAM? What drivers are you using? if you are using the new one have to change all GPU to compute.
|
|
|
and the project for ATI
|
|
|
TRDC Wallet: TRqp7CptiGWf4bnVgvRBvQfUx5u3fjU3chQXkeTZt66zKZcH9ExTf24916ECvjpQoPP57kwzSim3gCR Fa5XrXg5m3A4rJyUne Paiment ID: 08411321b48cf9f5bbbdfd30afc6653fd518f377c54ab1e2b573c3a79dc5dba9 Thanks
|
|
|
i have 6C for more than 6 month and everything is ok
|
|
|
try setting all pcie slots speeds to gen 2. (3 locations to change this) disable the lightning port. double check the riser cable/swap the cable for another. try skipping a pcie lane with the riser.
if you have done all this, than i think is a driver problem , try to uninstall and install fresh drivers , blockchain ati drivers,
|
|
|
with that info i think is a windows problem, not a problem of the miner, make a troubleshoot more accurate
|
|
|
i have a question: how much you have get the cards ?
|
|
|
you can go also for asus H270 prime , cheaper and very easy to config, i can say plug and play but you have to enable 4G
|
|
|
Every GPU testing one by one are working? -What drivers are you using? -PCI Gen1 to all 3 points? -Power supply? I had the version H270 from asus and no problem with 5 or 6 cards.
|
|
|
I have just ordered RX470 Radeon for mining. Which the best software I should use? Claymore? CCminer? Or something else? Kind regards.
Use claymore, it has options to set fan speed, temp, which gpu's to use etc. These options help when you want to setup the autostart of the batch file as soon as window starts. I have configured my pc to auto bootup after a power outage, so it helps me. So to install the custom driver, shared by RobinHood in the link you shared, I had to install driver crimson 17.4.3 , then goto device manager and right click the RX580s and update the driver. If I try to install the AMD block chain driver and then upgrade the driver from device manager to the custom driver by Robinhood, it says “The best driver software is already installed". and also Claymore 10.0v crashes without any error message. (Even tried with 10.3V) In my opinion you have to do everything from scratch, -install a fresh clean windows, -and than install the ATI block chain driver, -find the stock bios and flash it back, -than use Claymore to check if the cards are ok, -normally you have mire in stock with 22-24, after find mod the bios, if you have only 580 you need only to mod, but if you have any 570 you need to use also the pach, remember to increase the virtual memory to 16GB. And that's all.
|
|
|
i forgot i put the fan on min 60%
|
|
|
so i got all the hardware today and after a few hours i had it working now i have few questions
im mining musiccoin right now
2 rx570 doing 21.600mh\s 21.900mh\s out of the box
im gonna bios them and let you guys know what's te hashrate
my gpu temp is 75c is that normal ?? or it should be lower and fan speed is around 40%
give me ur advice
thx in advance
For me is to high 75c, i am mining ETH dual and around 50c with no condition or something else to low the temperature.
|
|
|
with a 580 4GB elpida i can get 29.4 stable with 1130 - 1990, if i increase the ring become unstable,
|
|
|
probably it will be difficult to put so many equipment near
for 12 cards its perfect for more i am with you its too difficult
|
|
|
Now i am using this board with 12 X RX580 with only 4GB ram installed and its ok, i build more than 5 rigs in that conditions and till now everything is ok, more than 3 weeks. I am so happy with that board
|
|
|
I'm having a hard time finding a shop in Europe where this motherboard is available. Have you got some links?
I was also wondering if the motherboard had to be powered by ALL 24 pin connectors or if 3 molex + 1x 24 pin is enough?
You don't need to use the 4-pin molex connectors on the motherboard when using powered risers. They are only there for the few people that may still use ribbon unpowered risers. https://youtu.be/6e7ywLfRogQ?t=4628So why dont we all use unpowered risers when we can get power from the pci-e slots? Because ribbon-type risers are a ROYAL PAIN to deal with compared to USB-cable-type, and you really need powered risers ANYWAY to avoid overloading the power traces on the MB even WITH the "aux power MOLEX connectors" in use if you run a lot of cards. I am trying to setup 12x 1080ti in my B250. Should I use the mobo's "aux power molex" even if I am using 12x powered risers?? So far I got to set 7x 1080ti (4x in A slots and 3 in B slots), but I cant make windows recognize the 8th vga. The slot appears as green on boot, but Win 10 refuses to find it. with 12 ATI i had no problem at all, after i find the correct drivers to use, i think its all about drivers humm, I havent tested other drivers, I am using the latest one. So, the ones who have 12x nvidia VGAs, which driver are you using?? i am on ATI, i don't know what has to be used in nvidia, if you have ati i will be happy to help you.
|
|
|
I'm having a hard time finding a shop in Europe where this motherboard is available. Have you got some links?
I was also wondering if the motherboard had to be powered by ALL 24 pin connectors or if 3 molex + 1x 24 pin is enough?
You don't need to use the 4-pin molex connectors on the motherboard when using powered risers. They are only there for the few people that may still use ribbon unpowered risers. https://youtu.be/6e7ywLfRogQ?t=4628So why dont we all use unpowered risers when we can get power from the pci-e slots? Because ribbon-type risers are a ROYAL PAIN to deal with compared to USB-cable-type, and you really need powered risers ANYWAY to avoid overloading the power traces on the MB even WITH the "aux power MOLEX connectors" in use if you run a lot of cards. I am trying to setup 12x 1080ti in my B250. Should I use the mobo's "aux power molex" even if I am using 12x powered risers?? So far I got to set 7x 1080ti (4x in A slots and 3 in B slots), but I cant make windows recognize the 8th vga. The slot appears as green on boot, but Win 10 refuses to find it. with 12 ATI i had no problem at all, after i find the correct drivers to use, i think its all about drivers
|
|
|
Where I can find best modded BIOS for Sapphire NITRO+ Rx 580 4GB OC p/n 299-1E366-101SA
i have this more than 50pcs of this card, the max without errors and incorrect shares in dual is getting 29.4Mhs
|
|
|
PLEASE HELP!!!
ASROCK H81 PRO BTC R2.0 3x Sapphire Nitro RX 580 4GB INTEL G3420 Processor with 8GB RAM 120GB SSD NEW VERSION RISERS ANTEC 1300W 80Plus Platinum PSU.
windows 10Pro 64bit Blockchain version Drivers Atidag patcher virtual memory increased CLAYMORE MINER DONE!!
everything is setup and running pretty solid on stock setting.
i flashed GPUs none by one and testing for 20 to 30 mins >> All fine i add 2nd GPU and did the same >> all fine
i flashed my 3rd GPU bios and when mining getting start and trying to creat 3rd GPU's dag file, a blue screen appears saying" THREAD STUCK IN DEVICE DRIVER" and system restart.
But when i upload original BIOS back to any of GPU, mining started without any problem and it ran more than 14hours until i repeat the same process but endup finding with same error " THREAD STUCK IN DEVICE DRIVER" and system restart.
I did tried to update motherboad's bios but ASROCK H81 PROBTC R2.0 don't have latest BIOS as previous OLD H81 PRO BTC have. I tried to upgrade with H81 PRO BTC BIOS file versions from P1.30 to P2.30 but didn't detect by ASROCK H81 PRO BTC R2.0
PLEASE HELP ME!!!
there are several reason for the crash, what drivers are you using? overclocking downclocking are you using? Check the 3-rd riser is working alone, give some more info to analise? what drivers are you using? - Blockchain version of drivers overclocking downclocking are you using? - I flashed bios with bit over clocking -cclock 1150 -mclock 2050 -cvddc 900 -mvddc 900 Check the 3-rd riser is working alone - I replaced riser, swap the risers and also swap the cards..i have already described in OP If you have done everything i think you need to start the miner with that -cclock 1130 -mclock 1900 -cvddc 900 -mvddc 900 , and if start with that parameter try to increase the -mclock to find the max that your cards support. Try and give feedback
|
|
|
|