Hello,

Im mining Some electronium but i am getting Low hashrate on my rx 580 8gb cards. My 570 4gb and 580 4gb cards get ~700m/h. The 8gb cards a get ~350 mh? Not sure why this is. All card have bios mod for ether mining. I set my vram to 50000. I was trying to clock the cards one by one with claymore but it does not seem to take the mclock a ccclock. Cryptonote seems much laggy and slower to start mining on all cards then ether as well.

start.bat below nothing in config.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool electroneum.hashparty.io:5555 -xwal etnkGQeNyQ3aJ3iypn7mR1iu4HbTqpfQvMGQvYsVUHnG3pRxEv5xyyJ7jvErPYjFNBVQXah6eae8fdq ckYYExGwH7Bw9XMHkng -xpsw x  -nofee 0 -ftime 10 -h 0 -dmem -1 -cclock 1150,1380,1150,1366,1366,1150 -mclock 1900,2150,2050,2000,2000,1950

 any thoughts my guess is its something to do with the mem clock being higher on the 8gb cards but it wont accept mods. thanks

So I have been trying to figure this out and i have narrowed it down a little. Even though new routers will work with both rigs for around 16 hours before they connection becomes choppy. The routes dont actually seem to be breaking, they just stop working with the Linux rig. They work fine with the windows 10 rig and my normal computer running windows 7.

As soon as i plug the linux rig in they internet becomes choppy.
I have tried this system with just 3 video card same problem persists.
used different Ethernet cords.

Replaced the Modem:Did not fix the problem.

Any thoughts on what i should fix on the rig to resolve this problem? maybe get another NIC ....?

Miner 1 running ethos on etherpool ether only
Miner 2 running windows 10 claymore dual mining ether/SIA nonopool.

I have run into a problem where my routers keep breaking. My first router ( Netgear WGR614) that i have had for 5+ years lasted about a month and a half. When they fail they start getting intermitting connection on all ports. My reported hash rate doubles shares found drop way down and I find tuns of stale shares, eventually they disconnect completely.

I have burned out 3 more routers Net Gear AC 750 that have been lasting about 16 hours before they start having the intermittent connection.

If I connect one of my miners directly to the modem it works fine no problems.

One weird thing was I plugged my original router in and it worked again for about 16 hours after a few days rest. This did not work again after an hour rest. I will try again in a few days. This did not work the same for the AC750 routers.

Originally I thought it might be the network switch I have so I got another long Ethernet cord and connected both mining rigs directly to the router same problem persisted.

It does get hot during the day when they burn out maybe 80-90 room temp.

Should I buy better routers? Is it the cheap ones.
Are there some setting I can change on the router to make them not burn out?
I will try to plug one in another outlet read this could cause problem with routers.
Any thoughts on what is going on? Thanks

Both pools below if you want to see how they start behaving
https://eth.nanopool.org/account/0xe92a32c5b0f9305c7ccc0d30efa00ca0607d9b4d
https://ethermine.org/miners/e92a32C5B0F9305c7CCC0d30efa00cA0607D9b4D

Have them Still available? Where are you Located?