 Show Posts
|
|
Pages: [1] 2 »
|
v11.8:
- fixed issue with missed GPU temperatures when miner is started via Remote Desktop Connection (RDC).
- Linux version: removed libcurl library dependency.
- added "-showdiff" option.
- a few minor bug fixes and improvements.
any info about "showdiff" parameters - default, etc? |
|
|
|
It needs more ram to get the things going. What's the problem?
some hours to get what? And? for example, one rig didn't lower ram usage even after 40 hours. All rigs a totally equal, so smth is wrong, I think Everything is ok. thank you |
|
|
|
It needs more ram to get the things going. What's the problem?
some hours to get what? And, for example, one rig didn't lower ram usage even after 40 hours. All rigs a totally equal, so smth is wrong, I think |
|
|
|
|
Claymore,
just after start miner uses about 800 Mb of memory, and after a while only 150 Mb. Is it a bug?
|
|
|
|
I know that ssl works for CryptoNote coins, such as Electroneum, but I've never had it work with Ethash coins, but I gave the latest Claymore a go on Ethereum and it would not use ssl unless the "-checkcert 0" parameter was used. Don't know if this switches off ssl when it has been specified in the comand line but it worked. Here is the comand used that worked: setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool ssl://us-east.ethash-hub.miningpoolhub.com:20555 -ewal User.Worker -eworker User.Worker -esm 2 -epsw x -allpools 1 -allcoins 1 -checkcert 0
..and this is the output (note the SSL/TLS encryption is enabled)
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual GPU Miner - v11.1 ║
║ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is us-east.ethash-hub.miningpoolhub.com:20555
DCR: 0 pool is specified
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to
select current pool
OpenCL initializing...
AMD Cards available: 1
GPU #0: Pitcairn (AMD Radeon R9 200 Series), 4096 MB available, 20 compute units (pci bus 0:0:1)
GPU #0 recognized as Radeon 270/270X
POOL/SOLO version
GPU #0: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'us-east.ethash-hub.miningpoolhub.com' <45.56.113.50> port 20555 (SSL/T
LS)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
SSL/TLS encryption is enabled
Pool certificate validation disabled
ETH: Stratum - Connected (us-east.ethash-hub.miningpoolhub.com:20555) (SSL/TLS)
Setting DAG epoch #182...
ETH: Authorized
Setting DAG epoch #182 for GPU0
Create GPU buffer for GPU0
ETH: 02/28/18-10:13:38 - New job from us-east.ethash-hub.miningpoolhub.com:20555
and this for ethermine (no "-checkcert" in config): 02:02:18:409 664 SSL: Imported 37 certificates from local storage
02:02:18:440 48c ETH: Stratum - connecting to 'eu1.ethermine.org' <91.121.167.111> port 5555 (SSL/TLS) |
|
|
|
2. Yes, latest EthMan v3.7 already does it.
there is no blake2s or keccak algos in Options -> "second coin name" menu. And it shows decred now |
|
|
|
Using 8x GPU Nvidia GTX 1070 FE, on windows, Asus Prime z270-a works like a charm 32.100 Mh/s on each card total power 860Watt/h. but i had a big time hassle while i was trying to install the 8th card cos of the cheap m2->PCIe connector , everything solved when i use a better m2 ->PCIe from amazon --->> Explomos M.2 Key
What MB settings did you use? And which M.2 port is used to connect? |
|
|
|
|
@Claymore,
is there a chance that EthMan running on another computer somehow affects miner?
Miner itself is not very stable, but I noticed that without monitoring it works for hours, but when monitoring is on, it crashes sometimes within minutes and never work more than 1.10 hour.
Or it's just a coincidence?
|
|
|
|
|
@Claymore,
Can you, please, add some features to EthMan, such as:
A couple of columns with wallets addresses for Eth and second coin. Or, if it's too labour intensive, then one more comment column.
Sorting whole table by one of columns.
Changing column's place in the table.
9.8 with unofficial Beta driver works fine, thank you!
|
|
|
|
I've built ASM kernels for Baffin (RX460/560) cards with good speedup for DCR/SIA/PASC and may be 1% for ETH, now I check what I can do for Nvidia cards. New version will be available in 2-4 days.
Hi! Can you add, please, an average share rate (in shares per hour) to statistics ("s" button) for last hour, last day and from time the miner started? Also there are some issues in EthMan: 1) it sometime crashes when clicking "Edit config.txt" on working rig and always crashes when clicking the same on offline rig. 2) Two running instances of it become to consume 100% of CPU resourse after about 24-30 hours of running. Thank you. |
|
|
|
hello. these are my stat mining on ethermine. i have another rig elsewhere and seems more constant hashrate. Can someone tell me please if this seems correct? thanks for helping. ps. first time upload img here  https://pasteboard.co/Gz4bL8F.jpgMen... your hash rate... Can you share your rig specs? I think there are 5x1080 or 7-8 other cards with sligth OC |
|
|
|
|
@Claymore
I've found a bug in EthMan 3.3:
Right clicking on rig turned off (red or grey) and choosing "Edit config.txt" causes crash of EthMan. Sometimes is needed to do it twice.
|
|
|
|
You are sixth or seventh here. Try to read thread before posting something |
|
|
|
-ejobtimeout job timeout for ETH, in minutes. If miner does not get new jobs for this time, it will disconnect from pool Ok, it will disconnect from the pool, and then what? Will it reconnect ?  I mean, i wanted this option to reconnect to pool when no job received for x minutes. Is this going to happen? specify reserve pools in epools.txt |
|
|
|
Does your dashboard show an unpaid balance? If yes, goto the settings tab and you will see why the wallet ist still empty  Dashboard? settings tab?? Please, treat me like I was just born Your dashboard on ethermine.org Enter your address and click on "check status". Forget about the above post: you have to mine about two-three months to get first result))) That is complete nonsense. Right, with a minimum payout of 0.05 eth, 32MH/s should be around 4 days. he doesn't know even about dashboard, and you think he could change minimum payout? )) complete nonsense |
|
|
|
Heya all, First post (ever!) in these forums. I decided to have it in this thread because folks in here seems to know what they're talking about.. PLEASE forgive me if this is posted in the wrong place. I'd appreciate a headsup to where this post will be more suitable. ------- I'm new to mining. Very new. After doing some research I came to the conclusion that Claymore's is the right miner for me. Currently cruising at ~32.5 MH/s with a single GTX 1070 clocked @ 2500MHz mem. These are the exact, literal steps I made to get started: 1. Downloaded & installed Mist Eth wallet. 2. Created a 2nd wallet ("2nd wallet" - didn't like the default one) 3. Downloaded Claymore's 9.6, set it to Eth only and used the following settings: setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress -epsw x -mode 1 (*with Myaddress ofcourse being my wallet's #) 4. The client was running overnight. It has made over 100 shares. ------------ So far so good? yes. So why is it that I can't see any progress in my wallet? please treat me as a complete newbe - talk to me like step one basics.
What am I doing wrong? Am I missing a step? Why can't I see anything in my wallet?  - rouvio. you have to mine about two-three months to get first result))) |
|
|
|
Hello I have this problem:
Running on Windows 10 fresh install.
Socket was closed remotely (by pool)
Every 60-90 minutes of mining and then the rig is getting frozen.
In the event viewer in the same time there is an error:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I tried to give permission to these keys in the regedit, but it didn't helped.
Tried to set -r 60 so the miner to restart every 60 minutes, but this is not an option too.
Tried every single ethermine eu and us server, but I'm getting the same error.
I have 3 rigs and only one is getting this error.
I have switch and a routed before the rigs.
Tried to downclock cards, but they are stable in both cases and the rig is freezing. I have 1% stale shares if it's matters for stable mining...
Tried to use different IP (from the same switch).
Tried USB lan card.
Nothing worked.
I was using Claymore miner 9.2 and red that some guys installed 9.3 and the problem was gone - I installed 9.5 and for two days I didn't had the problem but it happen again.
Please help me the rig is freezing every 60-90 minutes.......
try to change port on the switch. I mean rj-45 socket |
|
|
|
Another problem. Open Options, close options, Cannot save file options_temp.ini Make sure you have rights to create/write this file. and Options_temp.in~ appear in folder add EthMan to antivirus exceptions. |
|
|
|
|
