Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[wartimekillers]

Claymore miners always crash when its start, but nicehash integrated claymore miners runs normally

[alesx.onfire]

Claymore miners always crash when its start, but nicehash integrated claymore miners runs normally

what os are u using?

[juvx]

What is the speed for dual mining?

I've only tested Eth / lbry
its 36 MH eth and 35 MH Lbry

[tpd09]

Hi guys what are you guys getting on Eth / LBRY?

Im getting 1070

29 MH/s ETH  and 28 MH /s LBRY

and 1080 Ti

36 MH/Sec ETH amd 35 MH/s LBRY

is this normal? My 1080 TI can do 520 MH/s LBRY solo. #5 seems really low unless its using the same part of GPU to mine ETH?

Is there a better coin to mine with more performance you'd recommend?

LBRY doesn't dual mine well, you end up losing eth speed easily. Nvidia cards also arent as good as AMD for dual mining.  CM says he is working on an ASM kernel for dual mining LBRY, 2x speedup for LBRY, but AMD only.  

Here is site for checking profits, for Nvidia, generally LBRY and Zec on top, dual mining eth/sia next, depends on cards, 1080/TI aren't as effective at Eth due to GDDR5X.

www.whattomine.com

how come whattomine does not have the 1080ti included?

[fredeq]

Hey guys i have problem with low hash rate gettin 13 to max 15 mhs on Claymore
Specs
5x Gtx 1060 6gb windforce from Gigabyte
Motherboard: Asus strix h270f
Psu 850w and 8gb of ram

Windows 10 fully updated with lastest drivers.
Tried on windows 7 same result.
Tried recommende drivers by Claymore
Tried older versions of drivers till 369
Tried Claymores versions 9.5 and 9.4 with all cudas versions.
Tried with single card direct to Pcie

Can somebe help

I would like to see a possible solution for this as well.
Happens for a friend on win10 for 5x1070 and 1x1060

All other algorithms except for equihash are working ok. (1070 hashes 330 instead of 420)

All good in the end. Creators update to win10 wasnt applied correctly at the first run.


@tpd09
It will be added next month, card already ordered.

[Yenihan]

Hi guys,

Im using claymore 9.3/9.5/9.6

Specs MSI Z170A gaming carbon pro
Intel CPU G4400
4 GB RAM
for now 4 * MSI RX 580 ARMOR OC (later up to 6 when I get my 1000 watt PSU) // Hynix memory // Drivers 17.4.4
Corsair 750watt Platinium 


I use this bios https://anorak.tech/t/msi-rx-580-armor-oc-8gb-hynix/5933/11
-cvddc 900 -cclock 1200 -mclock 2080


I running this rig a few days. Can we say this is stable. Sometimes i see dips to 109 mh/s, this is normal?

- Claymore screenshot https://i.imgur.com/y9jf0Km.jpg
- GPU-Z screenshot https://i.imgur.com/2nOloJL.jpg

I have the same MB, CPU but mining with 6x470s
From the  GPU-Z screen, I'd say something is wrong with the OC - some of the cards are running with default voltage. Also wondering how your GPU3 is using significantly less watts (almost impossible).....

I have been testing all ports on the MB. PCI-E ports 2 and 3 are broken. When I using different carts on these ports using less watts and not stable. When I use GPU cards on PCI-E ports 1, 4, 5 and 6 i have stable hashing rate and using 100 watt. You can see here https://i.imgur.com/cbNRs5O.jpg

Are you using -mvddc for underclock your memory?

[rouvio]

Heya all,

First post (ever!) in these forums.
I decided to have it in this thread because folks in here seems to know what they're talking about..
PLEASE forgive me if this is posted in the wrong place. I'd appreciate a headsup to where this post will be more suitable.


-------

I'm new to mining. Very new.
After doing some research I came to the conclusion that Claymore's is the right miner for me.
Currently cruising at ~32.5 MH/s with a single GTX 1070 clocked @ 2500MHz mem.

These are the exact, literal steps I made to get started:
1. Downloaded & installed Mist Eth wallet.
2. Created a 2nd wallet ("2nd wallet" - didn't like the default one)
3. Downloaded Claymore's 9.6, set it to Eth only and used the following settings:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress -epsw x -mode 1

(*with Myaddress ofcourse being my wallet's #)

4. The client was running overnight. It has made over 100 shares.

------------

So far so good?
yes.

So why is it that I can't see any progress in my wallet?
please treat me as a complete newbe - talk to me like step one basics.

What am I doing wrong?
Am I missing a step?
Why can't I see anything in my wallet?
 

- rouvio.

[frappucino]

I'm getting <3Mh/s on a GTX 970 (msi gaming) in solo mode,
on win10 with the recommended driver (352.84)

Anybody have a solution for this?

also, do people mod their bios for eth on nVidia cards?


thanks guys

[delle54]

Heya all,

First post (ever!) in these forums.
I decided to have it in this thread because folks in here seems to know what they're talking about..
PLEASE forgive me if this is posted in the wrong place. I'd appreciate a headsup to where this post will be more suitable.


-------

I'm new to mining. Very new.
After doing some research I came to the conclusion that Claymore's is the right miner for me.
Currently cruising at ~32.5 MH/s with a single GTX 1070 clocked @ 2500MHz mem.

These are the exact, literal steps I made to get started:
1. Downloaded & installed Mist Eth wallet.
2. Created a 2nd wallet ("2nd wallet" - didn't like the default one)
3. Downloaded Claymore's 9.6, set it to Eth only and used the following settings:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress -epsw x -mode 1

(*with Myaddress ofcourse being my wallet's #)

4. The client was running overnight. It has made over 100 shares.

------------

So far so good?
yes.

So why is it that I can't see any progress in my wallet?
please treat me as a complete newbe - talk to me like step one basics.

What am I doing wrong?
Am I missing a step?
Why can't I see anything in my wallet?
 

- rouvio.

Does your dashboard show an unpaid balance? If yes, goto the settings tab and you will see why the wallet ist still empty

[rouvio]

Does your dashboard show an unpaid balance? If yes, goto the settings tab and you will see why the wallet ist still empty

Dashboard?
settings tab??

Please, treat me like I was just born  

[Bob_chemist]

Heya all,

First post (ever!) in these forums.
I decided to have it in this thread because folks in here seems to know what they're talking about..
PLEASE forgive me if this is posted in the wrong place. I'd appreciate a headsup to where this post will be more suitable.


-------

I'm new to mining. Very new.
After doing some research I came to the conclusion that Claymore's is the right miner for me.
Currently cruising at ~32.5 MH/s with a single GTX 1070 clocked @ 2500MHz mem.

These are the exact, literal steps I made to get started:
1. Downloaded & installed Mist Eth wallet.
2. Created a 2nd wallet ("2nd wallet" - didn't like the default one)
3. Downloaded Claymore's 9.6, set it to Eth only and used the following settings:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress -epsw x -mode 1

(*with Myaddress ofcourse being my wallet's #)

4. The client was running overnight. It has made over 100 shares.

------------

So far so good?
yes.

So why is it that I can't see any progress in my wallet?
please treat me as a complete newbe - talk to me like step one basics.

What am I doing wrong?
Am I missing a step?
Why can't I see anything in my wallet?
 

- rouvio.

you have to mine about two-three months to get first result)))

[delle54]

Does your dashboard show an unpaid balance? If yes, goto the settings tab and you will see why the wallet ist still empty

Dashboard?
settings tab??

Please, treat me like I was just born  

Your dashboard on ethermine.org
Enter your address and click on "check status".

Forget about the above post:

you have to mine about two-three months to get first result)))

That is complete nonsense.

[f5alcon]

Does your dashboard show an unpaid balance? If yes, goto the settings tab and you will see why the wallet ist still empty

Dashboard?
settings tab??

Please, treat me like I was just born  

Your dashboard on ethermine.org
Enter your address and click on "check status".

Forget about the above post:

you have to mine about two-three months to get first result)))

That is complete nonsense.

Right, with a minimum payout of 0.05 eth, 32MH/s should be around 4 days.

[delle54]

I think he just wants to be spoon fed. I was a noob myself about 1 1/2 years ago and never asked anything I couldn't figure out myself. Just guess how many questions I asked - none, zero, nothing

[QuadraQ]

Hello all,

I'm hoping someone can point me in the right direction. I've built a third mining machine using Windows 10, and currently it has one RX 580 8GB card an an old 7970 3GB card in it. I've installed the latest AMD 17.4.4 drivers, and I copied over my setup from my previous miner including, Claymore miner 9.5 and my batch file from my other miner.

When I run the claymore miner it seems to run OK but I never get the purple line telling me the GPU temperature/fan speed! What am I missing? I don't remember ever having to turn that on before, and I'm using the same batch script I use on my other miner which DOES print out the GPU temperature/fan speed. I copied over the entire folder where I keep the miner and it's config files, and my batch files, etc. so I'm very confused.

Also does anyone know what decred intensity is a good starting point for an RX 580? Thanks!

- Monitor or emulator must be connected to the AMD GPU
- do not use Microsoft Remote Connection app - use Teamviewer or VNC instead
- disabled crossfire

How do I disable crossfire?

[Bob_chemist]

Does your dashboard show an unpaid balance? If yes, goto the settings tab and you will see why the wallet ist still empty

Dashboard?
settings tab??

Please, treat me like I was just born  

Your dashboard on ethermine.org
Enter your address and click on "check status".

Forget about the above post:

you have to mine about two-three months to get first result)))

That is complete nonsense.

Right, with a minimum payout of 0.05 eth, 32MH/s should be around 4 days.

he doesn't know even about dashboard, and you think he could change minimum payout? )) complete nonsense

[frappucino]

I'm getting <3Mh/s on a GTX 970 (msi gaming) in solo mode,
on win10 with the recommended driver (352.84)

Anybody have a solution for this?

also, do people mod their bios for eth on nVidia cards?


thanks guys

Anybody? 

[delle54]

he doesn't know even about dashboard, and you think he could change minimum payout? )) complete nonsense

See my above post.

[doktor83]

-ejobtimeout   job timeout for ETH, in minutes. If miner does not get new jobs for this time, it will disconnect from pool

Ok, it will disconnect from the pool, and then what? Will it reconnect ?
I mean, i wanted this option to reconnect to pool when no job received for x minutes. Is this going to happen?

[Bob_chemist]

-ejobtimeout   job timeout for ETH, in minutes. If miner does not get new jobs for this time, it will disconnect from pool

Ok, it will disconnect from the pool, and then what? Will it reconnect ?
I mean, i wanted this option to reconnect to pool when no job received for x minutes. Is this going to happen?

specify reserve pools in epools.txt