Nemo's  I have been using your miners for a few month and I love the simplicity of the automatic coin selection and auto sell and BTC deposit. 

With the current situation of BTC fee's being so high do you think it would be better if pools switch to an other currency for the auto payout.

I would like to know what type of wallets you are using ?  I must not be only smaller miner wondering how to deal with the BTC transfer fees eating all my profits

 I have been using Jaxx for a while and just noticed today that on a typical deposit of .000250 BTC I pay a mining fee of 0.024 BTC ! Basically I am making nothing just paying fees !

I have been running v2.0.2 for 24 hours now and no more crashing. thank you.

Question about the benchmark, is data refreshed during the run time or is only generated when the miner 1st starts.

( Stats from two 1080Ti's)

  Type: NVIDIA

Miner          Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----          ---------           ----- ------- ---------- ----
CcminerKlaust  MyriadGroestl 220.22 MH/s 0.00572    0.02599 zpool-Unknown
CcminerKlaust  Lyra2RE2      114.79 MH/s 0.00545    0.04749 zpool-Unknown
CcminerTpruvot Blake2s        11.79 GH/s 0.00516    0.00044 zpool-Unknown
CcminerTpruvot Bitcore        49.82 MH/s 0.00480    0.09641 zpool-Unknown
CcminerTpruvot X17            28.88 MH/s 0.00448    0.15501 zpool-Unknown
CcminerTpruvot hmq1725        13.93 MH/s 0.00399    0.28686 zpool-Unknown
CcminerTpruvot Blakecoin      14.15 GH/s 0.00350    0.00025 zpool-Unknown
CcminerKlaust  Groestl       121.37 MH/s 0.00340    0.02805 zpool-Unknown
CcminerKlaust  Nist5         137.79 MH/s 0.00270    0.01961 zpool-Unknown
Ccminersib     Sib            39.00 MH/s 0.00201    0.05145 zpool-Unknown
CcminerKlaust  NeoScrypt       1.83 MH/s 0.00194    1.06006 zpool-Unknown
CcminerTpruvot Timetravel     78.94 MH/s 0.00087    0.01106 zpool-Unknown

Trying the new package and PC crashes after a few hours.

New version 2.0 causes my Win 10 PC (Nvidia drivers 382.05)  to crash and reboot. where as 1.7.4 and 1.7.5 were running without problems.
1080 Ti EVGA cards, running stock settings except for 80% PowerLimit in MSI Afterburner.

Ran for a few hours

I will get a few :
EventID 4109 - Display driver nvlddmkm stopped responding and has successfully recovered.
followed by
EventID 4101 Application ccminer.exe has been blocked from accessing Graphics hardware.


Restart and 4 hours later
EventID 4109 - Display driver nvlddmkm stopped responding and has successfully recovered.
EventID 4101 - Application ccminer-x64.ex has been blocked from accessing Graphics hardware.

Gone back to the 1.7.5 package.

Mind sharing the port into for ssl on dwrafpool, nothing on the faq page.

I think I found my I can't get better performance for this card (ref http://www.legitreviews.com/sapphire-nitro-radeon-rx-480-4gb-video-card-review_184553/10)

"This overclock meant that we were running at up to 1370 MHz at time and the memory was running at 1900 MHz (7600 MHz effective) on the 4GB of GDDR5 memory. Not the highest overclock in the world, but you have to keep in mind the reference cards boost speed is 1266MHz and the Nitro RX 480 4GB cards are the ‘fallout’ from the binning process done by Sapphire as the best chips become higher clocked Nitro RX 480 8GB cards.

We could not get 8000MHz effective clock speeds on the memory and Sapphire confirmed that the Radeon RX 480 4GB comes with slower Hynix GDDR5 memory chips and that hitting 8GHz would be unlikely. If we went much over 1900MHz the system would hard lock. If we overclocked much higher on the core the system would also lock up. We were able to get some games to run at 1385MHz with stability, but others would crash. At 1370MHz on the core we played a handful of games and they all were stable with this particular card"

Seeking to improve Rx 480 performance.

- SAPPHIRE NITRO+ (100406NT+4GOCL) RX 480 4GB model with V9  runs at 220 H/s at factory  core 1306 / mem 1750  ( I think I can do better )

I tried pushing the mem over 2000 to duplicate other settings I saw posted on this thread but the PC crashed.
Card was headless so I plugged a monitor to it, same speed.  (ULPS is disabled for the card)

I have a Sapphire Fury running on same PC at 330 H/s using V9.

I see lots of references to bios mod's is the outcome the same as manually setting the Core and memory clocks in trixx or msi afterburner ?
 
Also I recall back in the day of Silt bios modes AMD was using signed bios's so it was reported to be impossible to modify bios without have a certificate to re-sign the bios file. Did AMD that drop that requirement ?

Have not been able to logon to  https://mymonero.com for 2 days now, anyone know when the site will be functional again ?

fyi I tried kminer-1.2b miner referenced in this thread

My system Windows 8.1 running Cat 13.12 drivers, cpu 1 core sempron 145
3 x 7970 PowerColor cards with Stilt mod bios running 1080/1500

kminer-1.2b give 1627h h/s at 600 watts, dev fee 0.7%
vs
claymore 8 cat 13.12 1620 h/s using 650 watts. dev fee 5%

So kminer1.2b and Claymore 8 are just about the same at mining speed, but dev fee is lower 0.7% vs 5% and uses 50 watts less on my rig.

Nice to see some competition

Newbee question,

I am solo mining found a block a few days ago. 9500 burst in my wallet. version 1.1.2  I sent 2 burst to Poloniex 3 days ago as a test.
It never showed up.

Question do I have to wait 1440 blocks of confirmation before I can transfer the mined burst to an exchange ?

In my wallet I have a balance of 9500 burst, available burst 9505  but both Guaranteed and Effective are at 0.  Will
they reflect 9500 once I get 1440 confirmations ?

Any other tips for sending burst to Poloniex

How does one get this miner to work with multiple GPU's ?.

I have two 7970 cards, --mining-threads=1 or 2 or 3 or 4 gives the same results. Only one card is showing GPU Core activity in GPU-Z.

in the %appdata%\boold\miner_conf.json, the    "device_index": 1, or   "device_index": 0, lets me use either cards but I did not find the syntax that would allow both to work.

Also my log files always contain these two errors,  Do I have any errors in my config file ?
14-Aug-05 20:41:52.995227 [miner 1][OCL 0/1] error:  CL_INVALID_VALUE
14-Aug-05 20:41:52.995227 [miner 1][OCL 0/1] platform index must me between 0
d 4294967295

I get this errors all the time with a miner_conf.json file or without.

Running on Windows 8.1 with AMD 13.2 drivers

Ok I just did the Balance to wallet a few times, it now says request pending don't know when you'll get it or when it will leave my account.

Thank you for accepting my digital dust !

Can someone please post a QBC address so I can give out the 446 QBC I have mined and sitting in my www.minep.it account.

Make sure you have no spaces in any of your folders, that is what causes the error.

Discovered my problems started when I made copies of my wallet folder, Found my original wallet folder loaded my wallet.bin and discovered it still had balance of 1.1 so my transfer out never worked.
Using simplewallet.exe I noticed that the block height was stuck at 50402.  I download new copy of the wallet and the block chain to a diffrent computer and only copied over my original wallet.bin.address.txt and wallet.bin.keys.   Simplewallet recreated the wallet.bin file. On this new wallet bock height was 53136 and it contained 7 MRO.

Wallet issues and a few questions

When mining at a pool using a wallet address such as moneropool.com  how long does it take for the total Paid, to show up in the wallet,  I have 3.9 MRO listed as paid but not in my wallet yet, over 12 hours have passed.  Should I be expecting for wait for minutes , hours or days ?

Yesterday I transferred about 1.1 MRO from my wallet, using the Cryptonote wallet v.0.15 (GUI for SimpleWallet) to Poloniex using a transaction id, over 12 hours later nothing has shown up, how can I trace this transaction ?

thank you

Ok I was able to fix my issue by copying all files to the root of my c:

My log file shows :

2014-May-22 08:56:55.327824 bitmonero wallet v0.8.6.295(0.1-gdda8b34)
2014-May-22 08:56:58.248479 ERROR ..\..\src\wallet\wallet2.cpp:493 e || !exists. THROW EXCEPTION: error::file_not_found
2014-May-22 08:56:58.248479 ..\..\src\wallet\wallet2.cpp:493:struct tools::error::file_error_base<1>: file not found "C:\Program.keys"
2014-May-22 08:56:58.248479 Error: failed to load wallet: file not found "C:\Program.keys"
2014-May-22 08:56:58.248479 ERROR ..\..\src\simplewallet\simplewallet.cpp:306 could not open account
2014-May-22 08:56:58.248479 ERROR ..\..\src\simplewallet\simplewallet.cpp:1053 Failed to initialize wallet

original location :

C:\Program Files (x86)\Mining\monero.win.x64.0517

new

C:\monero.win.x64.0517 works from this folder

My log file shows :

2014-May-22 08:56:55.327824 bitmonero wallet v0.8.6.295(0.1-gdda8b34)
2014-May-22 08:56:58.248479 ERROR ..\..\src\wallet\wallet2.cpp:493 e || !exists. THROW EXCEPTION: error::file_not_found
2014-May-22 08:56:58.248479 ..\..\src\wallet\wallet2.cpp:493:struct tools::error::file_error_base<1>: file not found "C:\Program.keys"
2014-May-22 08:56:58.248479 Error: failed to load wallet: file not found "C:\Program.keys"
2014-May-22 08:56:58.248479 ERROR ..\..\src\simplewallet\simplewallet.cpp:306 could not open account
2014-May-22 08:56:58.248479 ERROR ..\..\src\simplewallet\simplewallet.cpp:1053 Failed to initialize wallet

With the newest version I still get stuck at Address : Initializing.



I have loaded a wallet.bin that was created and still works with Simplewallet.exe

You can get the miner from the top of the tread.  You need the roulettecoin-qt.exe running locally on a computer.

for windows create file  in %AppData%\Roaming\Roulettecoin\roulettecoin.conf

with the following content

rpcuser=ANY
rpcpassword=any
rpcport=8668
rpcallowip=*
daemon=1
server=1
listen=1
gen=0


To mine with the custom miner running on same computer as wallet.

minerd.exe -o 127.0.0.1:8668 -u ANY -p any -t 6

use the -t to set your thread count.

if it works you'll see

2014-05-03 00:23:10] thread 2: 103429 hashes, 19.86 khash/s
2014-05-03 00:23:10] thread 0: 105562 hashes, 19.99 khash/s
2014-05-03 00:23:10] thread 1: 115700 hashes, 20.08 khash/s
2014-05-03 00:23:14] thread 3: 100152 hashes, 20.05 khash/s
2014-05-03 00:23:14] thread 2: 99293 hashes, 20.39 khash/s
2014-05-03 00:23:14] thread 0: 99940 hashes, 20.40 khash/s

A few questions about the Sandor11 cpuminer when used with 5 chip gridseed

1. How do you know the Autotune has completed ? From what I understand Autotune will increase is small steps 25 Mhz if not more than 3 hardware errors are detected if this is the case it drop down by 25 Mhz.

I just see these type of messages

[2014-04-29 22:33:4.217] 8@0 850MHz: Got nonce 70fe0200, Hash <= Htarget!
[2014-04-29 22:33:4.219] 8@0: 2821 steps until frequency adjusts to 875MHz
[2014-04-29 22:33:4.232] 8@0: accepted 3/3 (100.00%) 72.0/143.5/2152.9 (Pool: 2391.5) KH/s

I've never seen any message about Autotune having  completed  how is the end result displayed

2. Is it possible to dual mine Scrypt and SHA256 using Sandor11 cpuminer, and or in conjunction with another miner.

3. I have one Gridseed miner that only has a red flashing LED, Green one never turns on. it seems to be working fine. this is a replacement unit from ZoomHash wondering if I have another lemon.

cpuminer-gc3355 - Started: [2014-04-29 22:32:07]
=============================================================================
(2s) | 0.00/0.00 MH/s | A: 0 R: 0 HW: 0
Connected to useast.wafflepool.com:3333 diff 512 with stratum as user 1.........
=============================================================================
GSD 0 | 850 MHz | 522.2/287.3 KH/s | A: 7 R: 1 H: 0

=============================================================================
[2014-04-29 22:40:00] Stratum detected new block
[2014-04-29 22:40:00] Dispatching new work to GC3355 threads (0x6280ca50)

thank you.