Show Posts
|
Pages: [1]
|
This is indeed very strange. My MN always pay to the same address of my masternode but it didn't break my setup at all. It's on the same address with different input so that is basically a separate entity from my masternode. Though I have no technical skill to help you on this one, I'll suggest you to contact the team in their Telegram [1] channel. The team's admin there is always present and help everyone regarding their technical difficulties. Go and reach out to them to see what they can provide to help you on your problem. [1]https://t.me/syndicateLTDI tried on telegram no response, i post a comment on the masternode setup page no response, by mail no response ..... I'm loosing my patience
|
|
|
This is indeed very strange. My MN always pay to the same address of my masternode but it didn't break my setup at all. It's on the same address with different input so that is basically a separate entity from my masternode. Though I have no technical skill to help you on this one, I'll suggest you to contact the team in their Telegram [1] channel. The team's admin there is always present and help everyone regarding their technical difficulties. Go and reach out to them to see what they can provide to help you on your problem. [1]https://t.me/syndicateLTDOkay im going to check with them thanks for you re help i will post the solution if someone has the same problem
|
|
|
Does masternodes works well for you guys ?
|
|
|
Hi, my masternode is running but every time i've got a reward it pays my masternode wallet so i go from 5000 synx to 500x, so the masternode stop running, i didn't find the option to setup a default wallet to receive the coins, did anybody had the same problem ?
|
|
|
The same for me 0 Synx, and i have an error wallet " Warning: error readind wallet.dat! all ketys are read correctly, but transaction data or address book entries might be misisng or incorrect" I follow the instrcutions for the coinswap and load the bootstrap, but still the same You will have 0 SYNX until swap will occure. This is from Syndicate twitter (45 min. ago): "11 hours until snapshot. Reminder: If you already installed v2.0.0 your balance will be 0 until we proceed with the distribution. For help and informations, join our telegram channel"https://twitter.com/syndicatecoin/status/993854362135953408okay thanks
|
|
|
The same for me 0 Synx, and i have an error wallet " Warning: error readind wallet.dat! all ketys are read correctly, but transaction data or address book entries might be misisng or incorrect" I follow the instrcutions for the coinswap and load the bootstrap, but still the same
|
|
|
Hi All, I hope and SYNX Admin, Dev or some sort of representative of the SYNX HODL movement reads this and takes it as constructive criticism. I'm a HODLer of many MN coins. In fact I'd wager I have at least 1 MN of 80% of the MN coins currently in existence over the past 3-4 months. I'm not a programmer and am not especially technology sound. You'd classify me as a newbie when it comes to Linux and such. I rely upon well written guides to set up all my MNs and the help of the coin community on Slack, Discord, etc.
I want to like SYNX, I really do. I bought enough for a MN to try SYNX out recently. I love what I read that the community is loosely based upon the CHC HODL Movement (which I am a member) however this is probably one of the WORST if not THE WORST experiences I have encountered with a MN coin.
Firstly, trying to get an invite to the Slack group seems futile. I've asked on twitter, I've asked on Reddit, I've googled till I'm blue in the face. If you want to expand your community MAKE IT EASY FOR NEWBIES TO FIND YOU AND JOIN! Simple common sense. Be responsive because guess what, there are dozen of alternatives to the newbie investors such as myself and we will move on to other coins if we can't get access to you quickly and easily.
Secondly, WTF is wrong with your wallet?! IT is the ONLY wallet that won't sync unless I add the list if IP addresses to the CONF file. That took me about TWO DAYS of waiting and hoping for the wallet to sync then digging through pages and pages of forums to find out something to try. You couldn't paste this on the front page?! You couldn't have integrated this in with the install? From a newbie perspective this alone made the coin more trouble than it's worth.
Thirdly, WTF is wrong with your wallet?! (not a typo, seriously why are you not revamping this pile of crap; sorry Devs I'm calling it as I see it.) It is the ONLY wallet in my vast collection that lags and seems to crash every few seconds. I can't even successfully send my 5,000 SYNX from my SYNX Wallet address to my SYNX MN address. I.e. I sent 5,000.687 SYNX from the exchange to my SYNX wallet; generated a Masternode address and tried to send 5,000 SYNX to the MN address. The bloody wallet kept going unresponsive then when it responded nothing happened. Absolutely nothing.
Fourthly, the "guides" are from a pre-release? The screen shots don't even accurately reflect the current build. You couldn't even spend the time to update that?
Lastly, WTF is wrong with your wallet?! The layout is horrible. The buttons don't have a hover text to let the user know what the button actually does. You need to click the button, wait for the lag then see "Oh this icon meant Transaction History"
I may sound harsh but it's because like I said earlier, I truly want to like SYNX so it is profoundly frustrating to see these shortcomings. Hopefully I can still get access to the Slack gorup to get the support a newbie like me needs and I can provide a newbie perspective so the reach of this coin can be expanded.
HI guys i found this for freezing wallet and it works super well now ! hope it can help https://www.youtube.com/watch?v=sZvOUWyFzTU&t=3s And if someone can invite me to the slack channel i ll appreciate thanks
|
|
|
Someone can give me a tutorial to run a masternode on windows please ?
thx
I am still not getting a wallet to sync 2017-04-19 01:20:05 socket recv error 10054 2017-04-19 01:20:44 socket recv error 10054 2017-04-19 01:21:06 socket recv error 10054 2017-04-19 01:21:29 socket recv error 10054 2017-04-19 01:21:35 socket recv error 10054 2017-04-19 01:23:28 UPnP Port Mapping successful. 2017-04-19 01:24:09 socket recv error 10054 2017-04-19 01:24:09 socket recv error 10054 2017-04-19 01:25:11 socket recv error 10054 2017-04-19 01:25:40 socket recv error 10054 2017-04-19 01:28:14 socket recv error 10054 Hi i ve got the same error i cant syncronize yhe wallet did you finaly found a solution ? thanks
|
|
|
dan291r, you can keep running the masternode until the swap period comes, just keep an eye on updates. Okay thanks
|
|
|
I am not from the dev team I am just in the slack and sharing here actual progress regarding ICASH:
Yes there will be a timeframe on the swap. probably around 2-4 weeks. depending on how unstable is the old network.
One of the things will be the halving of the supply because its generating coins on a rate that is constantly taking value out of the coin.. so right now is the best time to get icash on masternodes because the blockreards will be a lot smaller on new network. This will gurantee a value in the new coin.
People who miss the swap will be on the icash network with their coins forever. There will be only 1 chance to get out of it with Your coins and it is coming closer really quickly. So be prepared for it soon!
For the swap period people can send their coins to coinexchange.io and there is a chance to swap them for a new coin with 1 : 1 ratio. Old network will be up after the swap but i personally will not be here anymore to help and all our team will come over to new netowork. There will be new slack and so much to come becausse we collaborating on this coin swap with another team to create more value... so best advice - check here everyday for updates so You do not miss the swap but it wll be for atleast 2 weeks so its probably hard to miss!
UPDATE - testnet tests were all successful and we are starting to set up the mainnet so we are pretty much done with it but we need to change up on few last fixes and we can start to prepare for swap this weekend.
Coinname and details will be available when the swap begins. until then i cannot give out any info on that part for safety reasons.
coins will not be exchanged automatically. every user decides how many icash he or she wants to exchange. icash will be existing after new network too but nobody will be here to take care of it so its probably going to be dead soon since its such an old codebase.
invite someone or if you cant give me email in private. There is no need right now to pull in more people into this slack that is useless in very short time. icash is pretty much history. whoever is here, we help how we can but there is no need to bring in more people to this slack.
its not about needing but this slack is going to be useless in numbered days. i have little time to set up another invite page right now.
i would make the slack channel invite free if i could. but i am not the owner of channel. just admin.
If you want to be up do date just look regularly on the icash website, or for an slack invite use the email on the website - but as you see there will be probably a new slack after the swap so lets wait
Thanks for the info, i have a masternode running on icash it is time to transfert all to coinexchange or i can wait a little bit more ?
|
|
|
Hey can someone help. I keep getting this when i try to start the goldminenode: "Not capable goldminenode: Goldminenode not in goldminenode list" And I already setup the conf files correctly, so is there something else I should do, I'm using my windows desktop? Well I guess there's no one here that can help me out right? You used http://ping.eu/port-chk/ and it says open? I checked the other guys that had the issue and it said "closed"... Thanks for responding, and it says closed. So what am I suppose to do from here? hi look at my reply you have to open port 2709 and make a nat rule from you re router to you re computer ip Then test again and if it say open you llbe good Hey, is the port 2709 or 7209 ? 7209
|
|
|
Hey can someone help. I keep getting this when i try to start the goldminenode: "Not capable goldminenode: Goldminenode not in goldminenode list" And I already setup the conf files correctly, so is there something else I should do, I'm using my windows desktop? Well I guess there's no one here that can help me out right? You used http://ping.eu/port-chk/ and it says open? I checked the other guys that had the issue and it said "closed"... Thanks for responding, and it says closed. So what am I suppose to do from here? hi look at my reply you have to open port 2709 and make a nat rule from you re router to you re computer ip Then test again and if it say open you llbe good
|
|
|
Do all the guys synchronize? I do not have. What is the problem?
Its like that since few weeks, it would be cool to acces to a slack invitation but cant find it
|
|
|
oke i setup my golddigger...but when do i get coins?
Did you get "enabled" as result? yes Same question. Been "Enabled" for 12 hours. Can see myself on Goldminenodes list etc, but have not received any coins yet. When do you start to receive coins? Thank you https://arc.masternodes.pro/
|
|
|
oookkkaaayyyy i finaly get it !! For those who have problems with pre_enabled and then expired message this is what ive done : go to : http://ping.eu/port-chk/ put you re external addresse IP and port 7209 If its closed you ll had to open a nat rule to port 7209 on you re router to you re computer. In my case i lefted my firewall open for port 7209 but it wasnt enough i had to make the nat rule. Sorry for my shity english hope it can help
|
|
|
Hi there. Need help running on windows. list-conf has been showing either "pre_enabled", "new_start_required" & "expired". thanks in adv.
The same for me i check the debug file.log. and i can see this : 2017-07-23 08:20:23 AdvertiseLocal: advertising address 78.52.163.172:7209 2017-07-23 08:20:26 ProcessMessages: advertising address 78.52.163.172:7209 CActiveGoldminenode::ManageStateInitial -- Checking inbound connection to '78.52.163.172:7209' CActiveGoldminenode::ManageStateInitial -- NOT_CAPABLE: Could not connect to 78.52.163.172:7209 I dont get it because my ports are open (i check with netstat the connexion is well established) n.
|
|
|
my wallet hasn't synced in a few days keeps saying no block source
My wallet don't sync since few days too How can i get a slack invitation to take the lastest news i know they are migrating the old network of icash because the network difficulty is too high and its stuck again. Just be patient, send your coins to coinexchange and wait for the swap now lol Okay thanks for the info Do you know how to join the slack group because by the offical it doesnt work
|
|
|
my wallet hasn't synced in a few days keeps saying no block source
My wallet don't sync since few days too How can i get a slack invitation to take the lastest news i know they are migrating the old network of icash
|
|
|
|