 Show Posts
|
|
Pages: [1]
|
nvOC v0019-2.0 Community Release - Miner Update Script This script will check your nvOC miners and download new ones. As requested, after download it will ask to recompile them.
Downloading and checking new miners for nvOC-v0019-2.x finished
Do you want to re-compile your miners (y/N)? y
Checking if bn.h bignum error is fixed for compiling miners or not
Select miners to compile, (multiple comma separated values: 1,6,7)
1- ASccminer
2 -KTccminer
3 -KTccminer-cryptonight
4- KXccminer
5 -NAccminer
6- SPccminer
7- TPccminer
8- vertminer
Do your Choice: [1] [2] [3] [4] [5] [6] [7] [8] [E]xit:
Good Job Bro... please add also the option "All of the above" to compile all miners |
|
|
|
bbswitch: No suitable _DSM call found.
anyone know why I would be getting this error message on repeat after boot?
Try an OS update, may solve the problem sudo apt update && sudo apt upgrade -y && sudo apt autoclean -y && sudo apt autoremove -y && sudo reboot thanks for the reply. I cant get to the terminal to update the os. Im also a ubuntu newb so bare with me pls. i can get to the grub command line and i can get to the tty1 login for which idk the username or pword. any help? user: m1 password: miner1 |
|
|
|
Can u share OC settings pls..
I m getting 750 kh max on 1070
there is (for Neoscrypt): POWERLIMIT_WATTS=250
__CORE_OVERCLOCK=105
MEMORY_OVERCLOCK=780 250 watts for 1070??? |
|
|
|
Here is the Klaust ccminer v 8.17 compiled with cuda 8 So far I get so much better neoscrypt hashrate with it SPccminer was giving me around 400 with 1060 and KT is giving me more than 630 KTccminer-v8.17Download, extract and copy it to /home/m1/KTccminer folder. Please test and check before replacing your old version. Change 0miner for the coins you want it to be the default miner. Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins. Thanks.  thanks my hash rate on 1070 were about 1100kH/s, with KTccminer v8.17 are hash rates about 1280kH/s... Excellent :-) 5x Zotac 1070 [2017-12-29 02:02:37] accepted: 19/19 (100.00%), 6413.03 kH/s yay!!!
[2017-12-29 02:02:40] GPU #3: Zotac GTX 1070, 1284.14 kH/s
[2017-12-29 02:02:40] GPU #1: Zotac GTX 1070, 1288.12 kH/s
[2017-12-29 02:02:40] GPU #4: Zotac GTX 1070, 1279.40 kH/s
[2017-12-29 02:02:40] GPU #0: Zotac GTX 1070, 1268.48 kH/s
[2017-12-29 02:02:40] GPU #2: Zotac GTX 1070, 1273.72 kH/s
[2017-12-29 02:02:51] GPU #0: Zotac GTX 1070, 1277.30 kH/s
[2017-12-29 02:02:51] accepted: 20/20 (100.00%), 6411.26 kH/s yay!!!
[2017-12-29 02:03:04] GPU #4: Zotac GTX 1070, 1279.82 kH/s
[2017-12-29 02:03:04] accepted: 21/21 (100.00%), 6411.14 kH/s yay!!!
[2017-12-29 02:03:04] GPU #3: Zotac GTX 1070, 1286.11 kH/s
[2017-12-29 02:03:05] GPU #2: Zotac GTX 1070, 1275.07 kH/s
[2017-12-29 02:03:05] GPU #1: Zotac GTX 1070, 1284.76 kH/s
[2017-12-29 02:03:08] GPU #2: Zotac GTX 1070, 1277.51 kH/s
[2017-12-29 02:03:08] accepted: 22/22 (100.00%), 6410.67 kH/s yay!!!
[2017-12-29 02:03:08] GPU #1: Zotac GTX 1070, 1281.44 kH/s
[2017-12-29 02:03:08] accepted: 23/23 (100.00%), 6410.38 kH/s yay!!! Can u share OC settings pls.. I m getting 750 kh max on 1070 |
|
|
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control..  I think you both are running in local mode with older 3main Please run And check 3main version, if its not v0006 run the update script again to update it should i just copy 3main file.. or run the whole script |
|
|
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1
Boot Time: 2017-12-21 17:07:29
System Up Time: up 3 days, 19 hours, 2 minutes
Miner Uptime: 16:08
Mining Coin: BTG
BTC Price: 11810
Reboot Required: No
GPU Count: 9
GPU Utilization:
100 100 100 99 100 100 95 100 100
Temp, Fan, Power:
Auto Switch:
WTM Auto Switch Running
Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC
Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA
Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN
Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL
Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG
WTM Current Profit: BTG:159 %
MONA:140 %
ZCL:122 %
ZEN:122 %
VTC:119 %
ZEC:117 %
WTM Current Revenue (EUR): BTG:40.31
MONA:35.48
ZCL:30.90
ZEN:30.75
VTC:30.16
ZEC:29.69
24H Average Revenue: 36.3243 EUR
[32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m
[32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m
[32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m
[32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m
[32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m
[32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m
[32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m
[32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m
CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main...
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m
[1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. |
|
|
|
Guys what was the solution for the situation when nvoc0017 at login asks for m1 user password but it doesn't accept miner1 ? i remember someone posted 40-50 pages ago a solution for remote access tackling of this issue, but in my case i am using the PC locally.
Reflashed the usb thumb drive 4 times already, it was working fine for several months before and would show this screen only after power button would be used to turn the pc off suddenly . Now every time I start from the flash drive it goes to the m1 login window.
I think best is to update to latest versions Will see how the 19.1.4 behaves, nvoc17 has been rock solid for months on my computers mining zec or nicehash equihash, did not need any babysitting at all. Several attempts to run v19 before lead to issues with random restarts due to some scripts messing around, tried to identify but could not make it work stable so used v17 all along. i usually put manual fans setting, individual clocks and individual power and no automatic temp /power control . Press alt+ctrl+f1 at login screen..then login and enter the following command sudo dpkg --configure -a |
|
|
|
|
can i update 19.2 directly from version 19 stable
|
|
|
|
I try to use v0019-2. Changed settings in 1bash: ZM_or_EWBF="ZM" ZEC_POOL="europe.equihash-hub.miningpoolhub.com" but starting EWBF with pool us-east.equihash-hub.miningpoolhub.com  Where I must change it? Whats your coin? mph_equihash and other equihash coins has different settings in 1bash # MPH_EQUIHASH
MPH_WORKER="$WORKERNAME"
MPH_ADDRESS="Your Miningpoolhub account name"
MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com"
MPH_EQUIHASH_PORT="17023" MPH_EQUIHASH_POOL="europe.equihash-hub.miningpoolhub.com" No one pool in 1bash not us-east Thats really weird, It should read from 1bash... Are you sure you are editing the 1bash in /home/m1 ? And not other one for example in Downloads folder ? Yes, I edited in /home/m1 And I deleted all other 1bash Sorry I set COIN="SALFTER_MPH_PROFIT_SWITCHING", where I must set pool for SALFTER_MPH_PROFIT_SWITCHING? It sets the pools from mph api: " http://miningpoolhub.com/?page=api&action=getminingandprofitsstatistics" I think you should set currency to EURO instead of USD to get euro servers, not sure I set all like wrote on miningpoolhub, but no have result. Started EWBF instead of ZM and pool us-east instead europe If u want only mph equihash then set the coin to "MPH_EQUIHASH"...and u will get zm miner.. |
|
|
|
The new unofficial 19-2.0 is almost ready,
Thanks to Stubo and Leenoox for their awesomeness
So many great additions and lots of bug fixes.
New dstm zm miner 0.5.6, Claymore 10.02, TPccminer 2.2.2, ccmeiner-xevan.
New and improved watchdog and temp control , and so many more ...
New Coins: Electroneum(ETN), Trezarcoin(TZC), Vivo(VIVO), Pirl(PIRL), Altcommunity(ALTCOM)
New 1bash will be posted soon so you can edit and make it ready for the update.
The update will be released in a day or 2
So If you have any suggestions or requests , post before we release it.
Keep calm and carry on mining.
In coin pxc and sib in 0miner if [ $COIN == "PXC" ] then HCD='/home/m1/TPccminer/ccminer' ADDR="$PXC_ADDRESS/$PXC_WORKER" screen -dmSLL miner $HCD -a neoscrypt -o stratum+tcp://$PXC_POOL:$PXC_PORT -u $ADDR -p $MINER_PWD -i $PXC_INTENSITY fi if [ $COIN == "SIB" ] then HCD='/home/m1/TPccminer/ccminer' ADDR="$SIB_ADDRESS.$SIB_WORKER" screen -dmSLL miner $HCD -a sib -o stratum+tcp://$SIB_POOL:$SIB_PORT -u $ADDR -p $MINER_PWD -i $SIB_INTENSITY.. is it correct..or instead of "dmsLL".. "dmsL" should be there.. |
|
|
|
I managed to grab an image:  This is happening on both my rigs Thats not a problem Ubuntu is checking drive, wait and it will boot Same thing happend for me...and I waited for 1 hour still same screen..what to do |
|
|
|
Klaust ccminer is fixed! Compiled it with new makefile.am and its working like a champ Raised my neoscrypt hash rate by more than 20% from 800 to 1030~1060 on GTX-1070 And here is the compiled link if any one wanted KTccminer Dropbox Download LinkDownload, Extract to /home/m1/KTccminer Then change neoscrypt lines in 3main from : if [ $COIN == "FTC" ]
then
HCD='/home/m1/SPccminer/ccminer' To: if [ $COIN == "FTC" ]
then
HCD='/home/m1/KTccminer/ccminer' And in Nicehash and MPH_switcher lines : From: "cmd": "/home/m1/SPccminer/ccminer -a neoscrypt ... rest_of_the_line ...
To: "cmd": "/home/m1/KTccminer/ccminer -a neoscrypt ... rest_of_the_line ...
m1@m1-desktop-102:~/Downloads/ccminer-klaust$ ./ccminer -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:20510 -u papampi.nv101 -p x
ccminer 8.13-KlausT (64bit) for nVidia GPUs
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0
Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.
[2017-09-20 23:01:54] Starting Stratum on stratum+tcp://hub.miningpoolhub.com:20510
[2017-09-20 23:01:55] NVML GPU monitoring enabled.
0
1
2
3
[2017-09-20 23:01:55] GPU #1: waiting for data
[2017-09-20 23:01:55] 7 miner threads started, using 'neoscrypt' algorithm.
[2017-09-20 23:01:55] GPU #3: waiting for data
[2017-09-20 23:01:55] GPU #6: waiting for data
[2017-09-20 23:01:55] GPU #5: waiting for data
[2017-09-20 23:01:55] GPU #2: waiting for data
[2017-09-20 23:01:55] GPU #0: waiting for data
[2017-09-20 23:01:55] GPU #4: waiting for data
[2017-09-20 23:01:55] Stratum difficulty set to 256
[2017-09-20 23:01:55] Stratum difficulty set to 1374.19
[2017-09-20 23:01:55] hub.miningpoolhub.com:20510 neoscrypt block 1891623
[2017-09-20 23:01:56] hub.miningpoolhub.com:20510 neoscrypt block 1891624
[2017-09-20 23:02:00] hub.miningpoolhub.com:20510 neoscrypt block 1891625
[2017-09-20 23:02:02] GPU #2: Gigabyte GTX 1070, 1047.67 kH/s
[2017-09-20 23:02:02] GPU #1: Gigabyte GTX 1070, 1047.00 kH/s
[2017-09-20 23:02:02] GPU #0: Gigabyte GTX 1070, 1036.62 kH/s
[2017-09-20 23:02:02] GPU #5: Gigabyte GTX 1070, 1053.91 kH/s
[2017-09-20 23:02:02] GPU #6: Gigabyte GTX 1070, 1050.90 kH/s
[2017-09-20 23:02:02] GPU #4: Gigabyte GTX 1070, 1029.65 kH/s
[2017-09-20 23:02:02] GPU #3: Gigabyte GTX 1070, 1016.98 kH/s
[2017-09-20 23:02:08] GPU #3: Gigabyte GTX 1070, 1019.92 kH/s
[2017-09-20 23:02:09] accepted: 1/1 (100.00%), 7284.19 kH/s yay!!!
[2017-09-20 23:02:20] hub.miningpoolhub.com:20510 neoscrypt block 1891626
[2017-09-20 23:02:20] GPU #6: Gigabyte GTX 1070, 1060.29 kH/s
[2017-09-20 23:02:20] GPU #2: Gigabyte GTX 1070, 1048.35 kH/s
[2017-09-20 23:02:20] GPU #5: Gigabyte GTX 1070, 1051.61 kH/s
[2017-09-20 23:02:20] GPU #0: Gigabyte GTX 1070, 1028.51 kH/s
[2017-09-20 23:02:20] GPU #3: Gigabyte GTX 1070, 1022.12 kH/s
[2017-09-20 23:02:20] GPU #1: Gigabyte GTX 1070, 1045.29 kH/s
[2017-09-20 23:02:20] GPU #4: Gigabyte GTX 1070, 1030.82 kH/s
Can u share power, cc and mc settings for 1070 |
|
|
|
I remember there being a list with a ton of different GPUs and some recommended OC and power limits. Was that removed? I'll be getting a shady chinese no name 15 GPU motherboard I found on Alibaba soon, will love to see if everything is compatible then too.
edit: anyways, I should probably come up with my own overclock and power limit settings based on my mining algorithm and power consumption preferences. will just stick to stock for now.
Can u give the link of that motherboard |
|
|
|
|
??
