Temporel
|
|
December 24, 2017, 08:02:56 PM |
|
Here is the Klaust ccminer v 8.17 compiled with cuda 8 So far I get so much better neoscrypt hashrate with it SPccminer was giving me around 400 with 1060 and KT is giving me more than 630 KTccminer-v8.17Download, extract and copy it to /home/m1/KTccminer folder. Please test and check before replacing your old version. Change 0miner for the coins you want it to be the default miner. Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins. Thanks. Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me. i just replace TPccminer in command lines by KTccminer in 0miner file. My rig entering in a loop ... do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!? Lower the intensity ... i'll do later when i'm home. teamviewer is convenient for visualization and some basic operations, but not really for changing code remotely let alone testing without starting scripts Merry christmas all you dont like ssh ?
|
|
|
|
Stubo
Member
Offline
Activity: 224
Merit: 13
|
|
December 24, 2017, 09:54:06 PM |
|
I gave this a try again and I got my OneBash file now, not sure why it was missing before.
When editing it I notice the entry for ZEC for example shows worker and address. If I am using a pool like suprnova or miningpoolhib I just have a worker so what am I doing with the address, and I don't even know where to enter the worker password?
Only other question is overclocking. With the GTX 1080 I can overclock the memory to 1,000 in MSI Afterburner but I know that if I used ASUS GPU Tweak the numbers are displayed differently due to a multiplier and number of memory modules stacked in the GPU. Is setting 1,000 for the memory OC in the OneBash the same as 1,000 in MSI Afterburner on windows?
If you are running 19-2.0, the miner password is handled by this variable in 1bash: MINER_PWD="x" # Set the miner password. Default: x
As for OC settings, I don't have any 1080's but I do have 1070 and 1080 Ti's. These settings are a good starting point for both card on equihash: __CORE_OVERCLOCK=125 # Global Core overclock for all GPU's if not using INDIVIDUAL settings
MEMORY_OVERCLOCK=1000 # Global Memory overclock for all GPU's if not using INDIVIDUAL settings
Hope this helps.
|
|
|
|
killeriq
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 24, 2017, 10:16:36 PM |
|
regarding the 19.20 update updating 2nd USB and taking ages to connect to dropbox...its updating like 2h already dl is fast but till it connects actually ... Is it due to slow dropbox service? thx --2017-12-24 15:08:12-- https://www.dropbox.com/s/c3ogj353mmaumua/KXccminer-skunk-2.2.tar.gz Resolving www.dropbox.com (www.dropbox.com)... 2620:100:6021:1::a27d:4101, 162.125.65.1 Connecting to www.dropbox.com (www.dropbox.com)|2620:100:6021:1::a27d:4101|:443... failed: Connection timed out. Connecting to www.dropbox.com (www.dropbox.com)|162.125.65.1|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://dl.dropboxusercontent.com/content_link/RzNHWxgbM1K4X4YQZEigg8KSMqVcbB4QDL480vfkhtwI16xnLVLExj4CcYt2bkOS/file [following] --2017-12-24 15:10:21-- https://dl.dropboxusercontent.com/content_link/RzNHWxgbM1K4X4YQZEigg8KSMqVcbB4QDL480vfkhtwI16xnLVLExj4CcYt2bkOS/file Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 2620:100:6021:6::a27d:4106, 162.125.65.6 Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|2620:100:6021:6::a27d:4106|:443... failed: Connection timed out. Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|162.125.65.6|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 59215892 (56M) [application/octet-stream] Saving to: ‘KXccminer-skunk-2.2.tar.gz’
|
|
|
|
leenoox
|
|
December 24, 2017, 11:14:40 PM |
|
I gave this a try again and I got my OneBash file now, not sure why it was missing before.
When editing it I notice the entry for ZEC for example shows worker and address. If I am using a pool like suprnova or miningpoolhib I just have a worker so what am I doing with the address, and I don't even know where to enter the worker password?
Only other question is overclocking. With the GTX 1080 I can overclock the memory to 1,000 in MSI Afterburner but I know that if I used ASUS GPU Tweak the numbers are displayed differently due to a multiplier and number of memory modules stacked in the GPU. Is setting 1,000 for the memory OC in the OneBash the same as 1,000 in MSI Afterburner on windows?
If you had memory set to +1000 in Afterburner on Windows and it worked stable, the equivalent value would be +2000 under linux. This is true for memory overclock only. You have to double the memory OC under linux. The core overclock is equal. So if you had +100 core under windows, set it same +100 under linux. Be careful when you set Power Limit (PL). In Afterburner the Power Limit is set in percentage (%), while under linux you have to set it in actual watts (W). For example, if your card's maximum power limit is 200 watts and you had it set to 75% in Afterburner, under linux you will have to set your power limit to 150 watts for this example.
|
|
|
|
joshuajones02
|
|
December 25, 2017, 02:03:17 AM |
|
I asked this previously but I cannot find it in the pages and tried using search with google on here:
What is the cmd to restart the mining services without having to reboot? Thank you
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 04:48:52 AM |
|
I asked this previously but I cannot find it in the pages and tried using search with google on here:
What is the cmd to restart the mining services without having to reboot? Thank you
On V0019-2.0: Earlier versions: pkill -f wdog pkill -f 3main
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 04:52:17 AM |
|
Minimum Mining time causing problem in wtm auto switch, And I cant find a fix for it For now please disable it by updating to v0011 cd /home/m1/Downloads wget https://www.dropbox.com/s/3fbrlv4t5js8xt7/wtm_update bash /home/m1/Downloads/wtm_update
|
|
|
|
JayneL
Member
Offline
Activity: 104
Merit: 10
|
|
December 25, 2017, 05:39:42 AM |
|
Here is the Klaust ccminer v 8.17 compiled with cuda 8 So far I get so much better neoscrypt hashrate with it SPccminer was giving me around 400 with 1060 and KT is giving me more than 630 KTccminer-v8.17Download, extract and copy it to /home/m1/KTccminer folder. Please test and check before replacing your old version. Change 0miner for the coins you want it to be the default miner. Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins. Thanks. Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me. i just replace TPccminer in command lines by KTccminer in 0miner file. My rig entering in a loop ... do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!? Lower the intensity ... Ok will try to lower intestity.. for the neoscrypt algo with 1060 what is ur OC settings to get 630 khs? Oh KTccminer 8.17 not working on my Nvoc19 always screen is terminating
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 07:29:31 AM |
|
Here is the Klaust ccminer v 8.17 compiled with cuda 8 So far I get so much better neoscrypt hashrate with it SPccminer was giving me around 400 with 1060 and KT is giving me more than 630 KTccminer-v8.17Download, extract and copy it to /home/m1/KTccminer folder. Please test and check before replacing your old version. Change 0miner for the coins you want it to be the default miner. Any one testing KlausT ccminer 8.17 please report your hashrate and changes to default miners so we can change the default miners if its better on those coins. Thanks. Just tested yourt KTccminer compiled instead of TPccminer and this is not functional for me. i just replace TPccminer in command lines by KTccminer in 0miner file. My rig entering in a loop ... do I also have to modify the command line in the 0miner file with arguments other than TPcciminer!? Lower the intensity ... Ok will try to lower intestity.. for the neoscrypt algo with 1060 what is ur OC settings to get 630 khs? Oh KTccminer 8.17 not working on my Nvoc19 always screen is terminating Intensity 17 Power 70 OC 140 MC 600
|
|
|
|
monck
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 25, 2017, 11:46:17 AM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1 Boot Time: 2017-12-21 17:07:29 System Up Time: up 3 days, 19 hours, 2 minutes Miner Uptime: 16:08 Mining Coin: BTG BTC Price: 11810 Reboot Required: No GPU Count: 9 GPU Utilization: 100 100 100 99 100 100 95 100 100 Temp, Fan, Power: Auto Switch: WTM Auto Switch Running Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG WTM Current Profit: BTG:159 % MONA:140 % ZCL:122 % ZEN:122 % VTC:119 % ZEC:117 % WTM Current Revenue (EUR): BTG:40.31 MONA:35.48 ZCL:30.90 ZEN:30.75 VTC:30.16 ZEC:29.69 24H Average Revenue: 36.3243 EUR [32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m [32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m [32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m [32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m [32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m [32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m [32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main... [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 12:38:18 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1 Boot Time: 2017-12-21 17:07:29 System Up Time: up 3 days, 19 hours, 2 minutes Miner Uptime: 16:08 Mining Coin: BTG BTC Price: 11810 Reboot Required: No GPU Count: 9 GPU Utilization: 100 100 100 99 100 100 95 100 100 Temp, Fan, Power: Auto Switch: WTM Auto Switch Running Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG WTM Current Profit: BTG:159 % MONA:140 % ZCL:122 % ZEN:122 % VTC:119 % ZEC:117 % WTM Current Revenue (EUR): BTG:40.31 MONA:35.48 ZCL:30.90 ZEN:30.75 VTC:30.16 ZEC:29.69 24H Average Revenue: 36.3243 EUR [32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m [32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m [32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m [32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m [32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m [32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m [32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main... [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled?
|
|
|
|
monck
Newbie
Offline
Activity: 15
Merit: 0
|
|
December 25, 2017, 01:07:43 PM |
|
19-2.0 with all latest patches Miner_Temp_Control = YES
|
|
|
|
das0212
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 25, 2017, 01:08:36 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1 Boot Time: 2017-12-21 17:07:29 System Up Time: up 3 days, 19 hours, 2 minutes Miner Uptime: 16:08 Mining Coin: BTG BTC Price: 11810 Reboot Required: No GPU Count: 9 GPU Utilization: 100 100 100 99 100 100 95 100 100 Temp, Fan, Power: Auto Switch: WTM Auto Switch Running Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG WTM Current Profit: BTG:159 % MONA:140 % ZCL:122 % ZEN:122 % VTC:119 % ZEC:117 % WTM Current Revenue (EUR): BTG:40.31 MONA:35.48 ZCL:30.90 ZEN:30.75 VTC:30.16 ZEC:29.69 24H Average Revenue: 36.3243 EUR [32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m [32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m [32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m [32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m [32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m [32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m [32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main... [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. https://ibb.co/hrBv4m
|
|
|
|
thaelin
Newbie
Offline
Activity: 64
Merit: 0
|
|
December 25, 2017, 02:04:55 PM |
|
I just updated from a fresh install of 1.4 to 2.0 via update. All went well and I decided to turn this machine (4 @ 1060) loose to switch with ETH ZEC BTG.
I am seeing all the output except the WTM profit check, guess it is still 8WTM. All is working great and switching ok. I have full output from temp control here.
Just want to know if I should be seeing the WTM script running in Quake? Did before I set auto-switch on..
Thanks thay
|
|
|
|
WaveFront
Member
Offline
Activity: 126
Merit: 10
|
|
December 25, 2017, 03:10:43 PM |
|
Hello, For using a Raspberry Pi with an SRR board, which software do I have to run on the Raspberry Pi in order to work with the nvOC SRR script? Cheers
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 03:14:30 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1 Boot Time: 2017-12-21 17:07:29 System Up Time: up 3 days, 19 hours, 2 minutes Miner Uptime: 16:08 Mining Coin: BTG BTC Price: 11810 Reboot Required: No GPU Count: 9 GPU Utilization: 100 100 100 99 100 100 95 100 100 Temp, Fan, Power: Auto Switch: WTM Auto Switch Running Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG WTM Current Profit: BTG:159 % MONA:140 % ZCL:122 % ZEN:122 % VTC:119 % ZEC:117 % WTM Current Revenue (EUR): BTG:40.31 MONA:35.48 ZCL:30.90 ZEN:30.75 VTC:30.16 ZEC:29.69 24H Average Revenue: 36.3243 EUR [32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m [32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m [32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m [32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m [32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m [32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m [32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main... [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. I think you both are running in local mode with older 3main Please run And check 3main version, if its not v0006 run the update script again to update it
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 03:15:35 PM |
|
I just updated from a fresh install of 1.4 to 2.0 via update. All went well and I decided to turn this machine (4 @ 1060) loose to switch with ETH ZEC BTG.
I am seeing all the output except the WTM profit check, guess it is still 8WTM. All is working great and switching ok. I have full output from temp control here.
Just want to know if I should be seeing the WTM script running in Quake? Did before I set auto-switch on..
Thanks thay
wtm profit check is a lite version of wtm auto switch and will not run if auto switch is running You should see wtm auto switch tab in guake terminal
|
|
|
|
das0212
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 25, 2017, 04:03:41 PM |
|
@papampi, I just checked the telegram function and using your template but I'm missing the output of Temp, Fan, Power Do you have any ideas? Worker: MINER1 Boot Time: 2017-12-21 17:07:29 System Up Time: up 3 days, 19 hours, 2 minutes Miner Uptime: 16:08 Mining Coin: BTG BTC Price: 11810 Reboot Required: No GPU Count: 9 GPU Utilization: 100 100 100 99 100 100 95 100 100 Temp, Fan, Power: Auto Switch: WTM Auto Switch Running Mining History: Mon Dec 25 09:12:13 CET 2017 - Mining switched from ZCL to ZEC Mon Dec 25 10:54:55 CET 2017 - Mining switched from ZEC to MONA Mon Dec 25 11:16:44 CET 2017 - Mining switched from MONA to ZEN Mon Dec 25 11:32:19 CET 2017 - Mining switched from ZEN to ZCL Mon Dec 25 11:54:10 CET 2017 - Mining switched from ZCL to BTG WTM Current Profit: BTG:159 % MONA:140 % ZCL:122 % ZEN:122 % VTC:119 % ZEC:117 % WTM Current Revenue (EUR): BTG:40.31 MONA:35.48 ZCL:30.90 ZEN:30.75 VTC:30.16 ZEC:29.69 24H Average Revenue: 36.3243 EUR [32mINFO 19:16:47: GPU0 Accepted share 50ms [A:5, R:0] [0m [32mINFO 19:16:47: GPU6 Accepted share 48ms [A:3, R:0] [0m [32mINFO 19:16:48: GPU7 Accepted share 46ms [A:3, R:0] [0m [32mINFO 19:16:49: GPU5 Accepted share 47ms [A:5, R:0] [0m [32mINFO 19:16:49: GPU6 Accepted share 58ms [A:4, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 61ms [A:6, R:0] [0m [32mINFO 19:16:50: GPU8 Accepted share 44ms [A:2, R:0] [0m [32mINFO 19:16:50: GPU5 Accepted share 70ms [A:7, R:0] [0m [32mINFO 19:16:52: GPU5 Accepted share 66ms [A:8, R:0] [0m CRITICAL: Sat Dec 23 19:17:14 CET 2017 - GPU Utilization is too low: restarting 3main... [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:38 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:21:39 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:01 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:04 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:05 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m180 [0m [31m New Limit: [1m175 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:23 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 4 [0m, [31mThu Dec 21 00:22:24 CET 2017 - Adjusting Power Limit for [1mGPU4 [0m [31m. Old Limit: [1m170 [0m [31m New Limit: [1m165 [0m [31m Fan speed: [1m100 [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Fan speed was already close to max, dropping Power Limit in order to maintain the desired temp [0m [1mWARNING: GPU 8 [0m, [31mThu Dec 21 00:22:27 CET 2017 - Adjusting Power Limit for [1mGPU8 [0m [31m. Old Limit: [1m175 [0m [31m New Limit: [1m170 [0m [31m Fan speed: [1m100 [0m
Which version of nvOC you are using? It reads from temp control, does control enabled? Me too getting the samething...I am using nvoc 19.2.. i enabled temp control.. https://ibb.co/hrBv4mI think you both are running in local mode with older 3main Please run And check 3main version, if its not v0006 run the update script again to update it should i just copy 3main file.. or run the whole script
|
|
|
|
joshuajones02
|
|
December 25, 2017, 05:33:01 PM |
|
I'm having issues with the 19-2 test release and network stability. Not sure quite sure what is going on and it has happened twice so far. My home router will lose internet connectivity after a period of time (12 hours first time, ~5 hours second time) since updating to the tested release. When I remove the wired connections (clients running 19-2) from my router that goes to the rigs the internet will immediately go back online. Not sure where to check for logs regarding this as the entire router (wifi and wired) loses internet connection. Version: nvOC_1bash_ver="v0019-2.0.001" # Do not edit this Is there a way to downgrade the client without imaging the hard drive/usb? Your issue can not be update problem as only some scripts changed, but all your old files are stored in /home/m1/backups/old_to19_2 This went on for 6 disconnects total, stumped I sent logs from my router to the manufacturer and fresh installed 19-1.4 on all of the machines that were updated and router has yet disconnected from internet. It's weird because it wasn't my modem, I'd try the connection from the modem directly and it worked fine but while the rigs with 19-2 on it, the internet would not work at all. Instead it would not work until all of the 19-2 rigs were either disconnected physically from the router or once all of them have been rebooted. I'm not worried about it, just letting you know or the community (Manufacturer's response was a copy/paste of crap newbie instructions of updating firmware and resetting to factory settings). I'll do a fresh install of version 19-2 when the official version is released on one of my machines and let it go for a few days and slowly update 1 by 1. I have heard of a similar problem before with Ubuntu: https://superuser.com/questions/183982/ubuntu-server-9-04-computer-freezes-the-entire-network-periodicallyAs far as I know, the only "changes" made in 19-2.0 that could be responsible for this are normal Ubuntu updates made in the upgrade script. As such, the next time you try the upgrade, change this line of the script and see if it resolves the issue: sudo -- sh -c 'apt update; apt upgrade -y; apt autoremove -y; apt autoclean -y; sudo apt install -y moreutils gawk'
to sudo -- sh -c 'sudo apt install -y moreutils gawk'
That will allow you to upgrade to 19-2.0 without updating the underlying Ubuntu OS. Let us know how it goes. Hey man, this worked. I tried another attempt at downloading the 19-2 full release on a few of the rigs, same exact problem happened, they kept taking my router offline. I can have 1 plugged in and that 1 machine will run fine, but the moment I plug in 2 rigs with the ubuntu updates, it'll take the router offline. Fix - I put nvOC 19-1.4 back on and then updated them with your suggestion and everything is running smoothly. Thank you Here's a question regarding telegram. The messages are working fine except that at the very bottom of the message it says: Critical: *Shows date & Time* - GPU Utilization is too low: restarting 3 main... But I login and check the terminal and everything seems to be running fine and no restarts have happened. This message is popping up at the bottom of every message from every rig online
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 25, 2017, 05:36:52 PM |
|
I'm having issues with the 19-2 test release and network stability. Not sure quite sure what is going on and it has happened twice so far. My home router will lose internet connectivity after a period of time (12 hours first time, ~5 hours second time) since updating to the tested release. When I remove the wired connections (clients running 19-2) from my router that goes to the rigs the internet will immediately go back online. Not sure where to check for logs regarding this as the entire router (wifi and wired) loses internet connection. Version: nvOC_1bash_ver="v0019-2.0.001" # Do not edit this Is there a way to downgrade the client without imaging the hard drive/usb? Your issue can not be update problem as only some scripts changed, but all your old files are stored in /home/m1/backups/old_to19_2 This went on for 6 disconnects total, stumped I sent logs from my router to the manufacturer and fresh installed 19-1.4 on all of the machines that were updated and router has yet disconnected from internet. It's weird because it wasn't my modem, I'd try the connection from the modem directly and it worked fine but while the rigs with 19-2 on it, the internet would not work at all. Instead it would not work until all of the 19-2 rigs were either disconnected physically from the router or once all of them have been rebooted. I'm not worried about it, just letting you know or the community (Manufacturer's response was a copy/paste of crap newbie instructions of updating firmware and resetting to factory settings). I'll do a fresh install of version 19-2 when the official version is released on one of my machines and let it go for a few days and slowly update 1 by 1. I have heard of a similar problem before with Ubuntu: https://superuser.com/questions/183982/ubuntu-server-9-04-computer-freezes-the-entire-network-periodicallyAs far as I know, the only "changes" made in 19-2.0 that could be responsible for this are normal Ubuntu updates made in the upgrade script. As such, the next time you try the upgrade, change this line of the script and see if it resolves the issue: sudo -- sh -c 'apt update; apt upgrade -y; apt autoremove -y; apt autoclean -y; sudo apt install -y moreutils gawk'
to sudo -- sh -c 'sudo apt install -y moreutils gawk'
That will allow you to upgrade to 19-2.0 without updating the underlying Ubuntu OS. Let us know how it goes. Hey man, this worked. I tried another attempt at downloading the 19-2 full release on a few of the rigs, same exact problem happened, they kept taking my router offline. I can have 1 plugged in and that 1 machine will run fine, but the moment I plug in 2 rigs with the ubuntu updates, it'll take the router offline. Fix - I put nvOC 19-1.4 back on and then updated them with your suggestion and everything is running smoothly. Thank you Here's a question regarding telegram. The messages are working fine except that at the very bottom of the message it says: Critical: *Shows date & Time* - GPU Utilization is too low: restarting 3 main... But I login and check the terminal and everything seems to be running fine and no restarts have happened. This message is popping up at the bottom of every message from every rig online Run to clear old log files
|
|
|
|
|