Show Posts
Hi guys
currently I'm running version 9.7 with my 3 ASUS 580 Dual OC 8GB but the third card is giving me low rates (ETH + SIA). Any advice?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal wallet -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal Wallet -dcoin sia -dcri 25
ETH - Total Speed: 66.442 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 26.249 Mh/s, GPU1 25.969 Mh/s, GPU2 14.223 Mh/s
SC - Total Speed: 1661.045 Mh/s, Total Shares: 132, Rejected: 1
SC: GPU0 656.226 Mh/s, GPU1 649.234 Mh/s, GPU2 355.585 Mh/s
GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
ETH: 08/03/17-16:34:30 - New job from us1.ethermine.org:4444
ETH - Total Speed: 63.288 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 25.077 Mh/s, GPU1 23.998 Mh/s, GPU2 14.213 Mh/s
SC - Total Speed: 1582.193 Mh/s, Total Shares: 132, Rejected: 1
SC: GPU0 626.930 Mh/s, GPU1 599.940 Mh/s, GPU2 355.323 Mh/s
Thanks!!
currently I'm running version 9.7 with my 3 ASUS 580 Dual OC 8GB but the third card is giving me low rates (ETH + SIA). Any advice?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal wallet -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal Wallet -dcoin sia -dcri 25
ETH - Total Speed: 66.442 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 26.249 Mh/s, GPU1 25.969 Mh/s, GPU2 14.223 Mh/s
SC - Total Speed: 1661.045 Mh/s, Total Shares: 132, Rejected: 1
SC: GPU0 656.226 Mh/s, GPU1 649.234 Mh/s, GPU2 355.585 Mh/s
GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
ETH: 08/03/17-16:34:30 - New job from us1.ethermine.org:4444
ETH - Total Speed: 63.288 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 25.077 Mh/s, GPU1 23.998 Mh/s, GPU2 14.213 Mh/s
SC - Total Speed: 1582.193 Mh/s, Total Shares: 132, Rejected: 1
SC: GPU0 626.930 Mh/s, GPU1 599.940 Mh/s, GPU2 355.323 Mh/s
Thanks!!
Please provide gpu-z, PBE screenshots...
How do you manage voltage and frequencies?
We have the same exact cards so I would agree that you should check if Crossfire has accidentally been enabled - as this is usually the case if you're upgrading drivers as AMD like to enable them by default each and every time.
What's your GPU settings? Did you just copy 1750 > 2000 timings?
Reason is that I'm running 6x right now and with my settings, I get 28.5 tops per card @ current DAG and 540 Mh/s for sia @ 125w GPU-Z tdp.
just reset with msi afterburner and working properly again. Thanks for help
Quote
What's your GPU settings? Did you just copy 1750 > 2000 timings?
Reason is that I'm running 6x right now and with my settings, I get 28.5 tops per card @ current DAG and 540 Mh/s for sia @ 125w GPU-Z tdp.
Reason is that I'm running 6x right now and with my settings, I get 28.5 tops per card @ current DAG and 540 Mh/s for sia @ 125w GPU-Z tdp.
copy 1750 > 2000 timings, no oc at the moment, only dcri -25 running
ETH - Total Speed: 105.330 Mh/s, Total Shares: 440, Rejected: 0, Time: 04:40
ETH: GPU0 26.238 Mh/s, GPU1 25.992 Mh/s, GPU2 27.077 Mh/s, GPU3 26.024 Mh/s
SC - Total Speed: 2633.248 Mh/s, Total Shares: 1243, Rejected: 0
SC: GPU0 655.938 Mh/s, GPU1 649.791 Mh/s, GPU2 676.930 Mh/s, GPU3 650.589 Mh/s
