Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[vojtechpavelka]

Can you help me, please?

Hello, I have a problem with Claymore miner and my RX570 4GB card.

Claymore show only 3GB available, but the card has 4GB than miner crash. For the first time everything was good, miner works fine, but every next try crash.
What can I do with it?

NiceHash is without problems.

Thank you

[1715456928]

1715456928

[1715456928]

1715456928

[ffthomas]

Someone pls put memory in order, from best to worst:
samsung, micron, hynix, elpida

I always have been told : Hynix, Samsung, Elpida, Micron

Hm.. I use a lot of cards and my experience is that Samsung is better then Hynix. So my preferred order is Samsung, Hynix, Elpida, Micron.

[KGV]

Samsung, Hynix, Elpida, Micron.

[PB_SilentMiner]

Someone pls put memory in order, from best to worst:
samsung, micron, hynix, elpida

I'd say

1. Samsung
2. Hynix
3. Micron/Elpida (Elpida is a subsiduary of Micron)

But it all depends on the system architecture around it.

[doktor83]

Someone pls put memory in order, from best to worst:
samsung, micron, hynix, elpida

I'd say

1. Samsung
2. Hynix
3. Micron/Elpida (Elpida is a subsiduary of Micron)

But it all depends on the system architecture around it.

I would say i agree

[elVacen]

Hi guys
currently I'm running version 9.7 with my 3 ASUS 580 Dual OC 8GB but the third card is giving me low rates (ETH + SIA). Any advice?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal wallet -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal Wallet -dcoin sia -dcri 25

https://i.imgur.com/xzcgGOQ.jpg

ETH - Total Speed: 66.442 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 26.249 Mh/s, GPU1 25.969 Mh/s, GPU2 14.223 Mh/s
 SC - Total Speed: 1661.045 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 656.226 Mh/s, GPU1 649.234 Mh/s, GPU2 355.585 Mh/s
GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
ETH: 08/03/17-16:34:30 - New job from us1.ethermine.org:4444
ETH - Total Speed: 63.288 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 25.077 Mh/s, GPU1 23.998 Mh/s, GPU2 14.213 Mh/s
 SC - Total Speed: 1582.193 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 626.930 Mh/s, GPU1 599.940 Mh/s, GPU2 355.323 Mh/s

Thanks!!

[P00P135]

Hi guys
currently I'm running version 9.7 with my 3 ASUS 580 Dual OC 8GB but the third card is giving me low rates (ETH + SIA). Any advice?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal wallet -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal Wallet -dcoin sia -dcri 25



ETH - Total Speed: 66.442 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 26.249 Mh/s, GPU1 25.969 Mh/s, GPU2 14.223 Mh/s
 SC - Total Speed: 1661.045 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 656.226 Mh/s, GPU1 649.234 Mh/s, GPU2 355.585 Mh/s
GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
ETH: 08/03/17-16:34:30 - New job from us1.ethermine.org:4444
ETH - Total Speed: 63.288 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 25.077 Mh/s, GPU1 23.998 Mh/s, GPU2 14.213 Mh/s
 SC - Total Speed: 1582.193 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 626.930 Mh/s, GPU1 599.940 Mh/s, GPU2 355.323 Mh/s

Thanks!!

Check OC's are being applied and make sure you dont have SLI enabled.

[Bojcha]

Someone pls put memory in order, from best to worst:
samsung, micron, hynix, elpida

I'd say

1. Samsung
2. Hynix
3. Micron/Elpida (Elpida is a subsiduary of Micron)

But it all depends on the system architecture around it.

I would say i agree

Elpida and Hynix are better then samsung.
Also it very depends what hynix and what samsung. There is 3 versions of samsung chips for example, 'FE' (4GB) are best and 'FC' is worst.
Also same Samsung memory does not work same on different brands. For example 8GB mostly works good on every card except ASUS 480 8GB wich is the worst card ever. (still need to check 580 version, but I bet it's same crap)
Same as Hynix, same 4GB memory does not work good on NITRO+ but it works very good on other Sapphire cards and other brands.
For elpida so far i found it works very good on every card brand. Only memory chip that likes both ASM1 and ASM2 kernel.

[Ursul0]

Elpida and Hynix are better then samsung.
Also it very depends what hynix and what samsung. There is 3 versions of samsung chips for example, 'FE' (4GB) are best and 'FC' is worst.
Also same Samsung memory does not work same on different brands. For example 8GB mostly works good on every card except ASUS 480 8GB wich is the worst card ever. (still need to check 580 version, but I bet it's same crap)
Same as Hynix, same 4GB memory does not work good on NITRO+ but it works very good on other Sapphire cards and other brands.
For elpida so far i found it works very good on every card brand. Only memory chip that likes both ASM1 and ASM2 kernel.

very interesting indeed. thanks for the insight

[KGV]

I would say i agree
[/quote]
Elpida and Hynix are better then samsung.
Also it very depends what hynix and what samsung. There is 3 versions of samsung chips for example, 'FE' (4GB) are best and 'FC' is worst.
Also same Samsung memory does not work same on different brands. For example 8GB mostly works good on every card except ASUS 480 8GB wich is the worst card ever. (still need to check 580 version, but I bet it's same crap)
Same as Hynix, same 4GB memory does not work good on NITRO+ but it works very good on other Sapphire cards and other brands.
For elpida so far i found it works very good on every card brand. Only memory chip that likes both ASM1 and ASM2 kernel.
[/quote]

Ihave a lot rigs with different memory. So this from me:

Samsung is the best.
NITRO+ with hynix works perfect.
Elpida - pain in ass, but also works good.

[akuci]

If you're using nVidia cards, then:

Samsung
Micron
Hynix (better return it)

[bubislav]

If you're using nVidia cards, then:

Samsung
Micron
Hynix (better return it)

I totaly agree with nvidia ..... stats sometimes even Micron is beter then samsung all 1080ti.s that i have are Micron

[TechPark]

Hi guys
currently I'm running version 9.7 with my 3 ASUS 580 Dual OC 8GB but the third card is giving me low rates (ETH + SIA). Any advice?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal wallet -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal Wallet -dcoin sia -dcri 25



ETH - Total Speed: 66.442 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 26.249 Mh/s, GPU1 25.969 Mh/s, GPU2 14.223 Mh/s
 SC - Total Speed: 1661.045 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 656.226 Mh/s, GPU1 649.234 Mh/s, GPU2 355.585 Mh/s
GPU0 t=0C fan=0%, GPU1 t=0C fan=0%, GPU2 t=0C fan=0%
ETH: 08/03/17-16:34:30 - New job from us1.ethermine.org:4444
ETH - Total Speed: 63.288 Mh/s, Total Shares: 12, Rejected: 0, Time: 00:17
ETH: GPU0 25.077 Mh/s, GPU1 23.998 Mh/s, GPU2 14.213 Mh/s
 SC - Total Speed: 1582.193 Mh/s, Total Shares: 132, Rejected: 1
 SC: GPU0 626.930 Mh/s, GPU1 599.940 Mh/s, GPU2 355.323 Mh/s

Thanks!!

Please provide gpu-z, PBE screenshots...
How do you manage voltage and frequencies?

[graviteta]

my asus strix r7 370 4gb gpu is very slow hashing. is there any solution? i tried some gpu bios mods but the gpus are always lower hash rate. thank you

[Bojcha]

If you're using nVidia cards, then:

Samsung
Micron
Hynix (better return it)

I totaly agree with nvidia ..... stats sometimes even Micron is beter then samsung all 1080ti.s that i have are Micron

On 1080Ti memory works at more then 256bit

[Annabelle75]

 "improved support for systems with more than 10 GPUs, check readme for "-di" and "-mode" options description for details."

Yeah! No more moving cards 11 or 12 down the order to set mode 1-... Happy happy, thanks Claymore! You're awesome!

Which doesn't answer the question of why some cards, from the same lot with the same memory, run stable at 72 degrees/60% fan in a server room with exceptional (and exceptionally loud!) airflow, and others max out and throttle at my limit of 78 degrees/100% fan in eth only mode.

I was assuming some GPU manufacturers forgot the thermal paste on the asic/heatsink junction? And that I'll be taking a lot of cards apart soon enough... Anyone with experience in this issue?

[doktor83]

For example 8GB mostly works good on every card except ASUS 480 8GB wich is the worst card ever. (still need to check 580 version, but I bet it's same crap)

Not the case here, i have 6xAsus 480 8gb samsung cards , 3 fan edition, and i can say those are the best cards i have (and i have nitro+oc 8gb samsung etc..).
3 months since i modded and run them (were giving 30.3mhs back then), and from then it's working like a charm, maybe had 1  or 2 freezes total.
Temperatures are great, about 65c and they are working so quiet.
So i don't agree with you, sorry

[Branko]

For RX560, Micron is way way better than Hynix, still didn't see Samsung on them

[pr0ximus]

Did anyone actually get any difference/improvements with v9.8 over v9.7 for GTX 1060 6GB cards? I don't see any difference at all  

[P00P135]

Did anyone actually get any difference/improvements with v9.8 over v9.7 for GTX 1060 6GB cards? I don't see any difference at all  

Who said there were improvements for 1060's in 9.8?