 Show Posts
|
|
Pages: [1]
|
|
When the GPU cause the error. The windows has open the error dialog box , I had to close the box then the miner can be restart. Is there anyway to stop this step?
I had already close the error reporting service of window, and I didnt have this with claymore miner. I prefer to use phoenix but this step consume much of my time.
|
|
|
|
what is ccminer would best for the algorithm lyra2v2 ? Alexis78 is better than ccminer 2.2.4 at least. And 29 MH/s for gtx1060 6 GB Have you got link? |
|
|
|
|
could you add the list of device in the next release? for eg. I want to run some device in zec, some device in zen. Thanks you
|
|
|
|
|
How to get the miner auto start after it crash and window pops up a box with " zm is stop working " ?
|
|
|
|
|
got error with cudamemcpy 2 failed what that mean? please
|
|
|
|
|
hey guys , can you guys recommend a pool to mine? Some pool in the main page got no block or low numbers of block.
|
|
|
|
with 70% power limit I get around 83mh/s per card for nist5 19mh/s for X17 and 6500mh/s for blake2s.
I know ccminer had x17 but no idea which coin to mine and which pool. Same for blake2s . I look at miningpoolhub there is Verge (scrypt) , is that the one u mention? I mining zcoin for now as it at lease better than zcash for profitability. |
|
|
|
|
Can anyone show me the setting msi for Zcoin of 1080ti ? I had msi armor
I use 80 power, 90 core and 300 memory, is that ok?
|
|
|
|
Hi kosta85. I have been with zhash in 24h, has the bonus zen still able to apply? If there is. happy to have 1  . I have to say is your pool is great, the appearance is friendly and nice connection. Zen address : zncuWShgaEfM1KUNq4Rg3BFFnrikMnkVxfE And I have a little suggestion . the pool pay out is more than 0.1 Zen . that is fine but for me I find is really hard to keep track because there is about 12 deposit line in the account. just imagine 1 month. It will be so many . Therefore I suggest U can implement an option with a higher payout. It will be a lot easier to keep track . If it is hard for decimal number , can you out it option something like 0.5 or 1 zen. In my opinion, It will be perfect. Thanks again for a great pool, happy to mine with you ! |
|
|
|
|
This is a great miner show better hashrate than ewbf but for a while it crash for error like this:
illegal instruction or memory. The miner then stop, I have to close it manually for it to run again even I put the command restart.
The dtsn miner does not have the function exit as ewbf .
If you can put the function in, it will be perfect. when miner got stop it will close itself and re-run again, save a lot of time for many rig
|
|
|
|
Hey guys, how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup?  it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue. (BTC itself has i believe 50 confirms on fresh mined coins  ) Today it took a LOONG time to confirm coins, but how she goes :/ I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm oh alright thanks, i thought something was wrong with my setup. What is the avg 1080ti can get? im getting about 2800 but mph reports only 1.6 or something Same here I got 6000 but the pool only report 4000. been running for 2 days |
|
|
|
Hey guys, how long before the coin to be matured? I've been mining on mph all the coins i mined is still unconfirmed. Does that means something wrong with my setup? it takes a while it depends how many blocks are hit and how quick they are as i believe it's the "Coinbase maturity" (confirms hardcoded to be needed with ALL fresh blocks), and NOT MHP's issue. (BTC itself has i believe 50 confirms on fresh mined coins ) Today it took a LOONG time to confirm coins, but how she goes :/ I think it took 24 hours about for me on MPH for my whole yesterday mined coins to confirm Can you tell which one is better? miningpoolhub for suprnova? |
|
|
|
|
hi guys, what u guys get on the 1060 6G nvidia?
I am using ccminer 2.2 and get 1050 kh for 1 card. is that normal?
Can someone tell me the recommended oc setting?
Thanks.
|
|
|
|
|
They said to withdraw the sigt but they dont allow withdrawal and dont allow to trade. what should to do now?
|
|
|
|
Hi guys, I am new here. So much drama. I concentrate on mining.
I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?
I don't run any 1060s, but 20mh sounds pretty good from what I've seen people posting about 1060s... the newest ccminer and CWI miner seem to be the best 2 miners for skunk right now. Hi guys, I am new here. So much drama. I concentrate on mining.
I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?
+100 core +200 memory 75% TDP should be fine. Hi guys, I am new here. So much drama. I concentrate on mining.
I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?
20 is about the best you will do with a 1060. Probably run it around 75% power. The thing that is going to fail on your card is almost certainly going to be the fan(s). Try to keep them around 50% speed but still keeping your GPU around 70c. If you think about the effect of mechanical wear, it probably works like any other form of kinetic energy - based upon the square of the energy. Ie., my guess is that a fan running at 50% will last four times longer than one running at 100%. Not really totally sure on that, but what little I remember from physics seems to somewhat jive with that idea. Thanks you all. Im currently using + 150 core - 200 mem 90% power 80% Fan speed I got abt 20mh, but dont know if this setting is good. Got worried on the card. |
|
|
|
|
Hi guys, I am new here. So much drama. I concentrate on mining.
I got couple of 1060 6g mining card and get 20mh on 1 card, is that normal ? what is the best put in power ?
|
|
|
|
|
