 Show Posts
|
|
Pages: [1] 2 »
|
I would like to create account in c-cex, Please send me invitation code to my mail. vanbinhhut@gmail.comThanks! Anyone else from C-cex wants to create a new account and ask about that wonderful exchange? I need invitation code for register on c-cex please, give me invitaion code for c-cex in private message, thank you in advance |
|
|
|
Is it possible to do this without reimaging?
Thanks
There's a work around u can do to have it work for now but you will need to reetch eventually Type in shell or quake sudo apt-get install nvidia-384:amd64=384.98-0ubuntu0~gpu16.04.1 Then sudo apt-get install libcuda-9.0-1 Hi! tell me please how to switch to default repo after I was looking for workaround and added this repo sudo add-apt-repository ppa:graphics-drivers so now cant do your instructions (( Thank you in advance |
|
|
|
on 1.4 everything worked OK.
after update I have:
1. current version:
nvOC_1bash_ver="v0019-2.0.001" # Do not edit this
2. Auto temp is OFF, because it reboots rig immediately
3. Wdog starts, but have to ctrl+c, otherwise it restarts miner and after that restarts rig:
Mon Dec 11 19:37:02 MST 2017 - reboot in 10 seconds
4. If I ctrl+c wdog, than miner continues working as if nothing happened:
2017-12-11 07:35:51 PM|# zm 0.5.6
2017-12-11 07:35:51 PM|# GPU0 + GeForce GTX 1050 Ti MB: 4037 PCI: 1:0
2017-12-11 07:35:51 PM|# GPU1 + GeForce GTX 1050 Ti MB: 4038 PCI: 2:0
2017-12-11 07:35:51 PM|# GPU2 + GeForce GTX 1050 Ti MB: 4038 PCI: 3:0
2017-12-11 07:35:51 PM|# GPU3 + GeForce GTX 1050 Ti MB: 4038 PCI: 4:0
2017-12-11 07:35:51 PM|# GPU4 + GeForce GTX 1050 Ti MB: 4038 PCI: 5:0
2017-12-11 07:35:51 PM|# GPU5 + GeForce GTX 1050 Ti MB: 4038 PCI: 6:0
I think leenoox solved 1050 ti Open 5watchdog and check if you have v0009 # v=0009 : leenoox: Workaround for some 1050's reporting "Unknown" or "ERR" when power.draw is queried from nvidi-smi if not update to latest by running the latest update script again Can you update to the latest version as papampi suggested and post if it's working after the update. If not I will revisit this again. Also please post the output from and version of 5watchdog and 6tempcontrol Thanks Hi leenox, expireincing almost same problem (just with wdog problem, autotemp is ok), check pls my screenshot at http://prntscr.com/hn5lhytired looking for the problem... |
|
|
|
Sure. The easiest way to figure out what functions it supports is to just run it: m1@Miner3:~$./nvOC
Usage: ./nvOC clearlogs
clears out OS & nvOC logs
./nvOC gpuinfo
displays GPU ID, infomation, settings, and status
./nvOC patch
stops nvOC and applies outstanding Ubuntu patches and
Nvidia driver updates
./nvOC reboot
reboots the host machine
./nvOC stop
stops mining, watchdog and temperature control
./nvOC start
starts normal nvOC mining operations
./nvOC help
displays help about using and configuring nvOC for mining
The feature that I think will be most useful is gpuinfo which shows what GPUs you have including the settings like power and OC: m1@Miner3:~$./nvOC gpuinfo
ID,VENDOR,MODEL,PSTATE,TEMP,FAN,UTILIZATION,POWER,POWERLIMIT,MAXPOWER,GPUCLOCK,MEMCLOCK
--------------------------------------------------------------------------------
0,EVGA,GeForce GTX 1070,P2,48,50,100,113.66,115.00,170.00,1822,4303
1,EVGA,GeForce GTX 1070,P2,41,50,100,86.99,115.00,170.00,1569,4303
2,EVGA,GeForce GTX 1070,P2,54,50,100,112.74,115.00,170.00,1847,4303
3,MSI,GeForce GTX 1080 Ti,P2,68,75,100,243.26,250.00,330.00,1911,5556
The current implementation is not complete. For example, the help function is just stubbed out. We plan to complete this, add more, and refine existing functions in future releases. Enjoy. Hi, looks like works but does not start anything...nothing going on except the help screen Could you please check that? Thank you in advance, Respectfully, Serg |
|
|
|
Sure. The easiest way to figure out what functions it supports is to just run it: m1@Miner3:~$./nvOC
Usage: ./nvOC clearlogs
clears out OS & nvOC logs
./nvOC gpuinfo
displays GPU ID, infomation, settings, and status
./nvOC patch
stops nvOC and applies outstanding Ubuntu patches and
Nvidia driver updates
./nvOC reboot
reboots the host machine
./nvOC stop
stops mining, watchdog and temperature control
./nvOC start
starts normal nvOC mining operations
./nvOC help
displays help about using and configuring nvOC for mining
The feature that I think will be most useful is gpuinfo which shows what GPUs you have including the settings like power and OC: m1@Miner3:~$./nvOC gpuinfo
ID,VENDOR,MODEL,PSTATE,TEMP,FAN,UTILIZATION,POWER,POWERLIMIT,MAXPOWER,GPUCLOCK,MEMCLOCK
--------------------------------------------------------------------------------
0,EVGA,GeForce GTX 1070,P2,48,50,100,113.66,115.00,170.00,1822,4303
1,EVGA,GeForce GTX 1070,P2,41,50,100,86.99,115.00,170.00,1569,4303
2,EVGA,GeForce GTX 1070,P2,54,50,100,112.74,115.00,170.00,1847,4303
3,MSI,GeForce GTX 1080 Ti,P2,68,75,100,243.26,250.00,330.00,1911,5556
The current implementation is not complete. For example, the help function is just stubbed out. We plan to complete this, add more, and refine existing functions in future releases. Enjoy. please check screenshot, looks like your util is not included in latest realease 19-2.0 |
|
|
|
Hi I am testing WTM SWITCHER with 3 coins and I have to show you that miner restarts anyway if COIN STAYS THE SAME. Check it pls here http://prntscr.com/hl9ud0I think if we're not changing coin we dont have to kill and start mining process again Thank you Can I ask the difference between your miner hash rate and pool hash rate with vertminer ? See the difference on miningpoolhub.com mining with vertminer: So I wouldnt use this information as a stats for choosing miner, cuz pools are different, pools are counting your hashrate by their own algos, they maybe different I think If I would choosing the best miner for specific coin I would check actual amount mined in period of time with almost same difficulty...thats my point. |
|
|
|
nvOC 19-2.0 Community Release Notes:
nvOC utility (by stubo):
New function based utility that has many features including gpuinfo, stop, start, clearlogs, restart, etc.
Could you please explain how to use it? Can I now restart miner so it re-read new config? At the moment I am just restarting rig (( Thank you Sure. The easiest way to figure out what functions it supports is to just run it: m1@Miner3:~$./nvOC
Usage: ./nvOC clearlogs
clears out OS & nvOC logs
./nvOC gpuinfo
displays GPU ID, infomation, settings, and status
./nvOC patch
stops nvOC and applies outstanding Ubuntu patches and
Nvidia driver updates
./nvOC reboot
reboots the host machine
./nvOC stop
stops mining, watchdog and temperature control
./nvOC start
starts normal nvOC mining operations
./nvOC help
displays help about using and configuring nvOC for mining
The feature that I think will be most useful is gpuinfo which shows what GPUs you have including the settings like power and OC: m1@Miner3:~$./nvOC gpuinfo
ID,VENDOR,MODEL,PSTATE,TEMP,FAN,UTILIZATION,POWER,POWERLIMIT,MAXPOWER,GPUCLOCK,MEMCLOCK
--------------------------------------------------------------------------------
0,EVGA,GeForce GTX 1070,P2,48,50,100,113.66,115.00,170.00,1822,4303
1,EVGA,GeForce GTX 1070,P2,41,50,100,86.99,115.00,170.00,1569,4303
2,EVGA,GeForce GTX 1070,P2,54,50,100,112.74,115.00,170.00,1847,4303
3,MSI,GeForce GTX 1080 Ti,P2,68,75,100,243.26,250.00,330.00,1911,5556
The current implementation is not complete. For example, the help function is just stubbed out. We plan to complete this, add more, and refine existing functions in future releases. Enjoy. Hi Stubo! Thank you very much for explanaition!! thats really great!) |
|
|
|
Hi I am testing WTM SWITCHER with 3 coins and I have to show you that miner restarts anyway if COIN STAYS THE SAME. Check it pls here http://prntscr.com/hl9ud0I think if we're not changing coin we dont have to kill and start mining process again Thank you Yes , I tried to do an algo check to not restart 3main if not necessary but failed Fixed now Please run the update script again https://www.dropbox.com/s/2nl5jdg0v8vrijl/nvOC-19-2-updateWe are still on testing process before officially release 19-2, please wait a bit and we will announce it.Hi, I have updated with your new script, but anyway we have a problem with autoswitching, check pls the screenshot - it restarts the same coin somehow https://prnt.sc/hlj6ziThank you! |
|
|
|
Hi I am testing WTM SWITCHER with 3 coins and I have to show you that miner restarts anyway if COIN STAYS THE SAME. Check it pls here http://prntscr.com/hl9ud0I think if we're not changing coin we dont have to kill and start mining process again Thank you Can I ask the difference between your miner hash rate and pool hash rate with vertminer ? Sure, but I will tell you just tomorrow, cuz building, testing, stopping, changing params at the moment to find out the best config for my strix 1080. And 2 more things: - to build vertminer - we have to change bn.h at /usr/local/include/openssl
- pool hashrate on a single card looks to me not that stable as on the rig with 10+ cards...but anyway I will let you know
Yup I know the bn.h trick I tried vertminer and it gave me 80 MH/s on pool while miner shows 110, tpruvot 2.2.3 shows 113 on miner side and 90 on pool side Alexis gives most on miner and half on pool , going crazy to find the best miner ...lol your story just better than mine, cuz vertminer is the only one which is not crashing after start on VTC & MONA ... lol...All the rest just dont work with Asus Strix 1080 |
|
|
|
Hi I am testing WTM SWITCHER with 3 coins and I have to show you that miner restarts anyway if COIN STAYS THE SAME. Check it pls here http://prntscr.com/hl9ud0I think if we're not changing coin we dont have to kill and start mining process again Thank you Yes , I tried to do an algo check to not restart 3main if not necessary but failed Fixed now Please run the update script again https://www.dropbox.com/s/2nl5jdg0v8vrijl/nvOC-19-2-updateWe are still on testing process before officially release 19-2, please wait a bit and we will announce it.Thanks for update! I understand that its testing phase. so it everything cool) thanks again! |
|
|
|
Hi I am testing WTM SWITCHER with 3 coins and I have to show you that miner restarts anyway if COIN STAYS THE SAME. Check it pls here http://prntscr.com/hl9ud0I think if we're not changing coin we dont have to kill and start mining process again Thank you Can I ask the difference between your miner hash rate and pool hash rate with vertminer ? Sure, but I will tell you just tomorrow, cuz building, testing, stopping, changing params at the moment to find out the best config for my strix 1080. And 2 more things: - to build vertminer - we have to change bn.h at /usr/local/include/openssl
- pool hashrate on a single card looks to me not that stable as on the rig with 10+ cards...but anyway I will let you know
|
|
|
|
nvOC 19-2.0 Community Release Notes:
nvOC utility (by stubo):
New function based utility that has many features including gpuinfo, stop, start, clearlogs, restart, etc.
Could you please explain how to use it? Can I now restart miner so it re-read new config? At the moment I am just restarting rig (( Thank you |
|
|
|
Hi I am testing WTM SWITCHER with 3 coins and I have to show you that miner restarts anyway if COIN STAYS THE SAME. Check it pls here http://prntscr.com/hl9ud0I think if we're not changing coin we dont have to kill and start mining process again Thank you |
|
|
|
Hi, what about full support of Asus b250 mining expert.
What does it mean "partly supported"?
Is it a hard limit of 13 standard GPU + 6 P106? or will be possible to use 19 regular GPU?
My mobo does not even post bios messages when Iam inserting 14th regular GPU
Could anybody comment on this?
Thank you in advance!
Have you attached 3rd PSU? One PSU = 7 GPU Two PSU's = 13 GPU Three PSU's = 19 GPU Partial support means that not all GPU's can be overclocked, first 16 GPU can be overclocked, last 3 GPU will work on stock settings. See the post from two pages back regarding TB250 https://bitcointalk.org/index.php?topic=1854250.msg23785755#msg23785755I have attached just 1 PSU (3000watt) and attached 13 regula GPUs - they are fine, but when I am attaching 14th GPU - mobo does not even post any messages and does not start at all. And I am talking about *REGULAR* GPUs, not P106! Did anybody start this mobo with 14 and more *REGULAR* GPUs ? NOT P106 Thank you |
|
|
|
|
Hi, what about full support of Asus b250 mining expert.
What does it mean "partly supported"?
Is it a hard limit of 13 standard GPU + 6 P106? or will be possible to use 19 regular GPU?
My mobo does not even post bios messages when Iam inserting 14th regular GPU
Could anybody comment on this?
Thank you in advance!
|
|
|
|
Hello
ZM_Miner gives 350Sol/s but EWBF gives 560 Sol/s on my 1080
That seems to me happening only on my Asus b250 mining expert MoBo with 13 GPU installed, other boards (Asus Prime Z270-A with 9 GPU and old Gigabyte with 5 GPU) are ok.
Is it a bug in ZM?
Thank you
Better ask in dstm page https://bitcointalk.org/index.php?topic=2021765.0I think its not just about DSTM, I tested right now system following way: 1. when I leave just 10 asus strix 1080 in asus b250 mining expert - it works like a charm: load average is around 3 2. when I put 11 same card, load average goes up to 15 3. when I put 13 same card, load average goes up to 100 and everything is crazy slow... I have latest version of nvoc 19-1.3 Any suggestions? Thank you in advance! Had a similar issue once. I needed a better CPU. I was using a super cheap CPU and needed more PCIE express lanes for all the cards to function properly. Better to know for sure before buying one more CPU )) Yes, I have super cheap G3930 CPU. Can anybody proove it, please? Thank you in advance! |
|
|
|
Hello
ZM_Miner gives 350Sol/s but EWBF gives 560 Sol/s on my 1080
That seems to me happening only on my Asus b250 mining expert MoBo with 13 GPU installed, other boards (Asus Prime Z270-A with 9 GPU and old Gigabyte with 5 GPU) are ok.
Is it a bug in ZM?
Thank you
Better ask in dstm page https://bitcointalk.org/index.php?topic=2021765.0I think its not just about DSTM, I tested right now system following way: 1. when I leave just 10 asus strix 1080 in asus b250 mining expert - it works like a charm: load average is around 3 2. when I put 11 same card, load average goes up to 15 3. when I put 13 same card, load average goes up to 100 and everything is crazy slow... I have latest version of nvoc 19-1.3 Any suggestions? Thank you in advance! |
|
|
|
What does the pool you're connected to show for that worker?
Friend of mine is running an Asus Mining Expert as well with 7x 1070's and he's not having that issue with ZM.
I am using http://zcash.flypool.org Maybe problem with card quantity, I will try less |
|
|
|
|
Hello
ZM_Miner gives 350Sol/s but EWBF gives 560 Sol/s on my 1080
That seems to me happening only on my Asus b250 mining expert MoBo with 13 GPU installed, other boards (Asus Prime Z270-A with 9 GPU and old Gigabyte with 5 GPU) are ok.
Is it a bug in ZM?
Thank you
|
|
|
|
Hi Check pls  what does that mean? the rig does not restart, could you please give an advice what to fix? Thank you in advance |
|
|
|
|
