Show Posts
|
Pages: [1] 2 3 »
|
Hello, For the next version please modify hashrate diplay fo SRBminer multi 0.83. He has reworked hashrate stats and it displays 0. Thanks
|
|
|
Not only Phoenix miner, also team red miner with xhv.
|
|
|
Hello, I ahve a problem when runing miner as administrator. If the miner stops and restarts, or if the pc stops and restarts, the software does not detect the running process and it tries to start another instance of the miner, after this the system locks. I am running phoenix miner 5.2d.
|
|
|
Hello, I have some systems with rx580 windows server 2016 and driver 17.11.1.
The miner does not set vddc and mvddc correct and also the fan speed lags behind temperature so the cards get to 80 degress and shut down.
By comparison if i set the miner to claymore the settings are applied correctly and it works like normal.
This is not a new problem, i've had this for a long time and that's why i kept using claymore.
|
|
|
@patrike please implement memory voltage in awesome miner overclocking. On AMD cards the core voltage is a combination of cvddc + mvddc, if you do not set both at the same value core clock voltage is not applied correctly Images are on imgur https://imgur.com/a/vFggb6l
|
|
|
-cvddc is useless under 0.950 without -mvddc, check with hwmonitor or gpuz
|
|
|
Check S9 firmware page on bitmain. They released a firmware that makes an S9 consume 1200w while hashing the same.
|
|
|
Where can I download the latest version?
https://github.com/GuntharDeNiro/BTCT/releasesWill it still be registered/verified on the exchanges purchased?
It should. If it isn't, contact support staff. How can I convert the original setup (old version of config files) to the latest please?
There's no automated tool for that I believe. Thanks Lauda ... When I get back into the office (as I am quite ill and mainly bedridden at the moment), will set this back up onto the new VPS system. Though it would be advantageous to be able to convert the old config files over to the new bot/system, it can be restarted from scratch as the old config files are REALLY old ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Time for me to start learning how to use this all over again. If anyone can help in that department, I will be happy to hear from you. We can always do some deal with regards to the help. Thanks again. #crysx Read the wiki here https://github.com/GuntharDeNiro/BTCT/wikiThere is a tool: "The guys from https://gunbot.tools/ built a config.js converter/validator: you can use it to convert v9 config.js files to a valid v10 configuration. When you use the GUI on v9, you can find your config.js file within the /setups folder."
|
|
|
@patrike please add the option to upgrade the remote agent for a group while some clients are offline. Like you did for the start and stop commands. If some are offline you have to select all then deselect the ones that are offline.
|
|
|
Oh well. Loan came back for $23,500 - way less than I was hoping.
Thinking I'm going to get another Vega rig and 4-6 RX 500 Rigs.
Your ROI will be very impressive..... by year end, 1 BTC will be worth more than 23.5K ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I too have sold my Vegas to one of my buddies, a while back. The rig was back in the shop recently to do testing for cast-xmr and SBRminer. Some teaser for you: 8 x Sapphire Vega64 Reference on a K35v2 8 slot motherboard. Currently running off 128GB M2, 4GB DDR3 (not DDR4). Windozed 10. 64GB virtuall memory. Total cost maybe at least 50% of your loan amount. Testing using SBRminer, yields around 1.4kh/s per GPU, although GPUs are close to each other ... they hardly break 55c at 3600RPM fans. Still fine tuning a better clock timings to push it nearer 2kh/s per GPU on NH CN7 and Nanopool XMR. This rig pulls around 1440watts. Use driver 18.3.4, clock the Vegas at 1428/1150 and set the parameters in SRB as follows: dual threads, intensity@112 and worksize@16. Enjoy 2000 h/s. Yep, use driver 18.3.4. I'm using Cast XMR and get 11200 on 6 x vega56 without too much hassle.
|
|
|
I'm guessing this thread is expected to be AMD, but GTX 1060-1070ti are also GDDR5, has anyone made leeway there?
I seem to find that the expected timing enhancements do not bring much enhancement. GDDR5X has been a lot more interesting but i suppose that would be OT.
Not even 10-20% on an 1060? That would be also worth it.
|
|
|
It worked, thanks for the support.
|
|
|
Have some trouble upgrading 2 of my miners with any version of awesome miner. I have deleted everything and it doesn't work. I've also selected the requested .msi and it still doesn't work. I do not want to reinstall windows for this stupid agent error. This is the error: host image
|
|
|
Hello,
as 3GB cards will soon be unusable for Ethereum and also Bitmain seems to bring ETH ASIC miners, I am looking for a good coin to mine.
What would you suggest? Ravencoin?
ETC then? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ETC has a higher DAG than ETH Also you can still mine ETH if you put your mind to it. There's always Windows 7, Linux or Windows Server.
|
|
|
Sure man, release the kraken ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I would like to see the progress and work in a video ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks
|
|
|
I have 13 gpu, But it detects 14? From GPU 0000 to GPU 0013
It also detects the hidden devices ( leftover drivers ), you can check in device manager by going to view - show hidden devices.
|
|
|
BUGS: - after i change the pool to some miners i can't change the pool to the rest anymore. I have to restart Am then it works. - AM does not apply changed pool / template / mining application after applying them, several restarts of the miner is required
FEATURE REQUEST: - IMPORTANT - add an option to remove all income/revenue data in the dashboard from the view only / control view user roles - when you search for awesome miner agents put a field in the wizard to enter the password, so you don't have to enter the password for each host - if you add lots of miner it is tiresome to modify each one. - add a checkmark in miner properties to get the worker name from the description, so you don't have to always check "add to worker name" and type the worker for each miner - make a "clone" button for the managed hosts section - make the hw errors text color in webserver red so it pops out and see it better - make a button to map all the selected miner gpus to system monitoring - maybe add a tooltip so when you hover with the mouse above the miner after 2 you can see the details ( command line arguments and configuration )
|
|
|
|