 Show Posts
|
|
Pages: [1] 2 3 »
|
Hi, have you had anything prepared for this attic yet? just got a card here with the same memory and wanted to test around. tell me, did you see Polaris Bios Editor PBE 2.0 on your site? Could I use the same results as the ROMs you offer or are they even better adapted? I ask, because I actually have about 12 different RIGs with different cards and before I order a ROM for each card I would just buy your Polaris Bios Editor PBE 2.0 and make it myself. Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.
Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.
What Hynix type do you have?... H5GQ8H24MJ Ok, that's not the one I need. Have you used the timing strap from PBE 1.6? Send me PM I will give you improved version. |
|
|
|
that's exactly the list I was looking for. I must have been blindly sorry. but thanks again for your help! decided on nanopool now, by the way. yes, i know that your contribution is yours and i totally respect your work here.
but I didn't like your way of responding at all. as I said, I just wanted to have an exchange with users and their experience.
But you won't probably get any help... except from few folks like Wacko the guy is awesome he responds in my guides almost as much as I do sometimes even more  Thx Wacko! This thread is special only noobs are here... 90% of ppl mining ETN are total newbies, they don't know anything about mining. And the rest is just annoyed of all these dumb questions. Use this: http://etnheartbeat.com/Probably Spacepool would be best or Nanopool. |
|
|
|
|
yes, i know that your contribution is yours and i totally respect your work here.
but I didn't like your way of responding at all. as I said, I just wanted to have an exchange with users and their experience.
|
|
|
|
I've read your stupid yours so called guide, little boy, calm down. i ask about the experiences of other users, i want their opinions about pools. so either you contribute to it and give a reasonable contribution or just shut your mouth. or do we say otherwise, just be quiet... Hi, folks,
tell me, can you give me a list with pools the ETN mines so that I can look at alternative ones.
Which one do you actually recommend? Do you need one with TLS support if possible.
How about read the f*ckin guide? Like there aren't dozen of pools and list of all known pools... |
|
|
|
|
does that mean that I should get everything at once with the next block, right?
|
|
|
|
|
Is there any problem today?
mine since 12 hours with about 7k and I don't have a single payout
|
|
|
|
|
Hi, folks,
tell me, can you give me a list with pools the ETN mines so that I can look at alternative ones.
Which one do you actually recommend? Do you need one with TLS support if possible.
|
|
|
|
other pools can do it, too. I can't work on the client side, but I can't work around the whole thing. Hi,
i wanted to ask if you can use port 443 with TLS for the pool?
because we have a firewall at work and I'd like to avoid it.
thank you
Hello, I think firewall bypass should be done on the client's side. Each case is different and probably there won't be any solution to cover any possible traffic restriction variations. |
|
|
|
|
Hi,
i wanted to ask if you can use port 443 with TLS for the pool?
because we have a firewall at work and I'd like to avoid it.
thank you
|
|
|
|
|
say, there is also a possibility to bypass the firewall at the pool? so port 80 or 443 tls?
|
|
|
|
|
Hi, folks,
say, what would you like to mining. i have 6khs and had Monero minted so far.
to Sumokoin or Electroneum?
according to whatomine, sumokoin is actually better off even if the price is falling.
But on the other hand the Electroneum is so that I can do 100 times more coins in the same time. which would be much better with an increase in value.
but what's your opinion on that?
|
|
|
|
|
I'd be interested to know what better results you get.
I have partly with the same CPU different miner. sometimes the xmr-stak-cpu and sometimes the xmrig is better...
what's better with you guys?
|
|
|
|
Ich muss sagen ich bin zufrieden mit meinen Ryzen 1700. hab mit etwas OC jetzt ca 650 h/s den PC wollte ich aber auch danach behalten, daher hat mir ein günstiger nicht gepasst... |
|
|
|
Thanks for the update, I'll read myself in. Your links are on cell phones, I'm sorry. Even on the laptop it takes a long time... on the PC alone it's quite possible if I don't mine myself:) Hi,
Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
You may refer to reddit post https://cnhv.co/oab |
|
|
|
I didn't quite understand what to do. I delete the VEGA driver with the DDU, afterwards I leave 1 or more cards connected? which bios exactly do you mean, the final version or the beta?
I got the board yesterday and can't get more than one to work. Have also tried the latest BIOS and Beta BIOS with 4G decoding etc. but nothing works.
I also made your IOMMU settings, even without success.
Please ask for help:)
Use DDU to unistall the Vega drivers. Leave them installed in the motherboard. Then try reinstalling.
I actually prefer the next to last BIOS. There are issues with the latest X350 Gaming Carbon Pro/X350 Gaming Pro bios.
|
|
|
|
|
Sorry to bring up such an old topic.
But is mymonero. com recommended? Do you know other online wallets?
I don't have an xmr there yet but I have mine and soon I should transfer xmr there, so my concerns.
|
|
|
|
Please add supportxmr.com in your list... |
|
|
|
I got the board yesterday and can't get more than one to work. Have also tried the latest BIOS and Beta BIOS with 4G decoding etc. but nothing works. I also made your IOMMU settings, even without success. Please ask for help:) thank you for which board? I want to get the MSI X370 GAMING PRO CARBON for 4x Vega 56 and possibly 6 pieces later who can confirm that the board can handle 6 GPUs? MSI released a new bios to support "above 4g decoding" that may help to recognize more gpus.
Hello, I had previously written on this thread that I could not get the MSI X370 GAMING PRO CARBON working with more than 1 card, or even 1 card in some situations. My problems disappeared when I disabled IOMMU in the BIOS. After I disabled the IOMMU in the BIOS, everything worked correctly, no more kernel issues, and I have been running it with 4 cards for a few months now. NOTE: It is a gaming oriented card, and has a high power-consumption. This makes it less than ideal for mining, but it gets the job done. |
|
|
|
|
Hi,
Says Mal can someone here adapt a guide to the Vega 56 and Vega 64?
Somehow I have my problems.
thank you
|
|
|
|
|
