New to the Forum, so, hello.
Decide to take the plunge into GPU mining, tho I think putting the cash for the system into Bitcoin might have been easier! lol
Anyway, here's my setup
Mobo - Biostar TB250-BTC PRO CPU- Celeron G3900 Mem- Patriot 4G DDR4 2400 SSD- Sandisk SSD Plus 120G GPU- 3x EVGA 1080 ti sc Black gaming (4th will be installed tonight) PSU- 2x EVGA 850W Bronze (Soon to be 2400W Parallel Miner. As soon as I install the 230V circuit) 1 GPU and Mobo on one and 2 GPUs on the other
Windows 10 64
Using MSI Afterburner
GPUs are on risers with molex connectors...for now. Will go to 6-pin with the new PSU All in PCI 1x slots. Mobo bios set to GEN 2
Running EWBF CUDA miner Averaging 700 Sol/s per card 200W per card 3.5% Efficiency per card
Supernva Pool
So, being very new to this, what's the best way to increase my Hash Rate without affecting efficiency? $.1629 kWh in NH
I've had to turn down the Afterburner settings. I was getting hardware errors on the PCIe and PCI bus. Which in turn caused reboots.
Any and all advice is welcome! Just please don't be a too awful rude!
Thanks!!
|