New to the Forum, so, hello.
Decide to take the plunge into GPU mining, tho I think putting the cash for the system into Bitcoin might have been easier! lol
Anyway, here's my setup
Mobo - Biostar TB250-BTC PRO
CPU- Celeron G3900
Mem- Patriot 4G DDR4 2400
SSD- Sandisk SSD Plus 120G
GPU- 3x EVGA 1080 ti sc Black gaming (4th will be installed tonight)
PSU- 2x EVGA 850W Bronze (Soon to be 2400W Parallel Miner. As soon as I install the 230V circuit)
1 GPU and Mobo on one and 2 GPUs on the other
Windows 10 64
Using MSI Afterburner
GPUs are on risers with molex connectors...for now. Will go to 6-pin with the new PSU
All in PCI 1x slots. Mobo bios set to GEN 2
Running EWBF CUDA miner
Averaging 700 Sol/s per card
200W per card
3.5% Efficiency per card
Supernva Pool
So, being very new to this, what's the best way to increase my Hash Rate without affecting efficiency? $.1629 kWh in NH
I've had to turn down the Afterburner settings. I was getting hardware errors on the PCIe and PCI bus. Which in turn caused reboots.
Any and all advice is welcome! Just please don't be a too awful rude!
Thanks!!
Hi and welcome to the forum, I have Nvidia MSI 1080ti and they are way efficient in terms of mining, I am getting 670sol/s for 190watts in zec using EWBF Cuda miner, I am already fine with this as I am also considering power savings that will not compromise hashrates too much, I guess the hashrates youre getting is fine for me.