 Show Posts
|
|
Pages: [1] 2 »
|
Thanks for adding ethash, already testing  |
|
|
|
Hi,
What is the difference between miniZ v1.3n3 and miniZ v1.3n31?
Hi AcharyaOne, there is no difference. We updated the files about an hour ago with support for Maxwell GPUs. In HiveOS, after creating the flightsheet and uploading the miner, if you want to update the same miner file with exaclty the same name, you need to delete the old one first from the system (or you will get stuck with the old one). Because it may be difficult to delete this manually for some, we just added a new file with that extra '1' in case of someone needs it for a Maxwell and was using the v1.3n3 from yesterday. Thanks. Cheers I get that what you are saying but there's a way to do it. Maybe stop miner first but after that you can run the following command even from the dashboard (Run Command): /hive/miners/custom/custom-get http://miniz.ch/hiveos/miniZ-1.3n3.tar.gz -f -f will reinstall miner Thanks for your work, just wish it was a 1% fee :p Cheers Hi AcharyaOne, Some people have difficulties using the command line, and to be honest we did not notice the dashboard (when we test on HiveOS we mostly to use the bash shell). Thanks a lot for the tip! You may not believe this but 2% is very very little. At the moment is really not possible to change this, we still cannot even pay our current expenses from what we earn. If the situation changes we might reconsider  Thanks for using miniZ! Cheers Maybe --donate %  Hi RoninAlek, Thank you for your suggestion. We will add --donate option (but we will not decrease the fee). If the situation changes we might reconsider decreasing the fee Cheers Don't decrease the fee, just saying to add --donate. I personally think some fees (pools and mining software) should be higher. |
|
|
|
Hi,
What is the difference between miniZ v1.3n3 and miniZ v1.3n31?
Hi AcharyaOne, there is no difference. We updated the files about an hour ago with support for Maxwell GPUs. In HiveOS, after creating the flightsheet and uploading the miner, if you want to update the same miner file with exaclty the same name, you need to delete the old one first from the system (or you will get stuck with the old one). Because it may be difficult to delete this manually for some, we just added a new file with that extra '1' in case of someone needs it for a Maxwell and was using the v1.3n3 from yesterday. Thanks. Cheers I get that what you are saying but there's a way to do it. Maybe stop miner first but after that you can run the following command even from the dashboard (Run Command): /hive/miners/custom/custom-get http://miniz.ch/hiveos/miniZ-1.3n3.tar.gz -f -f will reinstall miner Thanks for your work, just wish it was a 1% fee :p Cheers Hi AcharyaOne, Some people have difficulties using the command line, and to be honest we did not notice the dashboard (when we test on HiveOS we mostly to use the bash shell). Thanks a lot for the tip! You may not believe this but 2% is very very little. At the moment is really not possible to change this, we still cannot even pay our current expenses from what we earn. If the situation changes we might reconsider Thanks for using miniZ! Cheers Maybe --donate % |
|
|
|
|
v1.3n3 fixed high cpu load on all my rigs. Thanks for resolving this quickly.
|
|
|
|
Hi MiniZ,
very good work.
Is there a chance you add a configfile support?
Cheers!
You talking about the GUI or the batch file? If you are talking about the batch file config, create a new batch file with: miniZ -h pause If you are talking about the GUI, they have it on their website: https://miniz.ch/miniz-gui-launcher/ |
|
|
|
Hi everyone, Thank you all for your support and feedback! There is a new miniZ miner version v1.2l! * Support for Equihash 192,7 (ZER, SAFE, GENX, VDL, ZERC). * miniZ GUI Launcher v1.0. (Windows) * Minor speed improvements for 144,5. * Fixed --intensity option. Express in percentage [0,100]. * Other bug fixes. Use Cuda 10.0 versions with the RTX GPUs. For other GPUs you should test and see which performs best. Hive OS support @ https://miniz.ch/2019/03/17/hive-os-support-3/For more information, download, and support check the website: https://miniz.ch/FAQ page. Download miniZ miner here: https://miniz.ch/download/Follow us Twitter Happy mining! Thank you for the Equihash 192,7 support. Great speeds. |
|
|
|
Attention!
Yesterday my Windows 10 issued Trojan:Win32/Zpevdo.A in miner.exe and removed it.
Developers, please comment it.
Same here. What's up with that? It's just windows being windows as you are running a program that's not whitelisted on their end. This is normal and has been going on for years. Just exclude your folder from Windows defender... Better yet get rid of windows defender. |
|
|
|
@Zminer777 I use the same command I use for EWBF
I've studied your log. Looks like gminer's anti-debugging system detected debugger and broke program. What's operating system you have used? linux? I guess debugger is running on your system (gdb, lldb, ...) Please reply in PM. GMiner v1.03 available for download v1.03+ fixed performance regression on GTX 1080 Ti/Equihash 144,5 under Windows Download links:Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rwWindows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8AGreat job on the miner. The stats updates are fantastic. Kudos. |
|
|
|
the worst miner for the reds, it's silly to use your rx580 which is worse than 1060))) the developer sucks, the miner is shit !!!
Take it easy there champ. Considering you have no experience with anything this developer does, you shouldn't talk shit. Also you chose team red...so go back to Ethash champ or develop a miner yourself, and win the next fight. Bye |
|
|
|
Hi realbminer,
Although all zhash coins use the same equihash params, they use different personalization string. Earlier it was one and only for all equihash 200,9 coins => ZcashPoW ... Now almost every zhash coin has it's own personalization string: BitcoinZ, Safecoin, ZelProof, ... You should add command line option to set that string, instead of hardcoded one.
Hi miodrag, RoninAlek, Would you please tell me more about zelcash? It's just so many equihash coins and own personalization strings ... you guys seem familiar with these coins. Do you think it worths mining at this moment compared to other equihash coins? I'm mining bytom at this moment. When the market crashed to under 200B ZelCash actually increased in value ( https://www.livecoinwatch.com/price/Zelcash-ZEL) It's a fairly new coin and gained great development from it's Dev team. It already released (Not 100% finished) ZelTreZ, same concept as Exodus... But you can have your own full nodes and a few other great features. I see ZelCash as where I wanted to see BTG and their Dev team showed great progress. I think BTG, BTCZ, Zero (192.7 algo, more ASIC resistant) and ZelCash are great coins. Bytom started out good, just the lack of exchange for the US market didn't really work for me at the time. I think there is now a way to correctly exchange it. Also they teamed up with Bitmain to make them ASIC miners which got destroyed by Bminer (and the original Chinese miner forgot the original name). The dev team didn't have a way out, which to me is a failure on their part. Sorry for the little react and any bad grammar. |
|
|
|
We’re pleased to release Bminer 10.1.0. The release provides: - Fix performance regression in BTM mining.
Please see https://www.bminer.me for more details. Happy mining! Will there be a way in the future for us to choose the coin we want to mine on Zhash? Or will you need to add each coin to the miner? May I ask if you are asking if Bminer can be used to set parameter by yourself? Just asking if I will be able to have Bminer work with ZelCash. As it only works on BTG right now? Hi RoninAlek, Bminer works with all equihash 144,5 coins including BTG at this moment, we may consider ZelCash in a future release. ZelCash is a 144.5 coin. I just keep getting "Rejected share #5 ([20,"invalid solution"])" Pools: equipool.1ds.us I get "20 Invalid Solution" bminer.exe -uri zhash://t1bn6p6JXqrfLbt4BYZA7kzREfd6P1DJ9za@mine-zel-na.equipool.1ds.us:50051 zel.cloudpools.net I get Accepted share but on server side it's all 0/Sols bminer.exe -uri zhash://t1bn6p6JXqrfLbt4BYZA7kzREfd6P1DJ9za@zel.cloudpools.net:5052 |
|
|
|
We’re pleased to release Bminer 10.1.0. The release provides: - Fix performance regression in BTM mining.
Please see https://www.bminer.me for more details. Happy mining! Will there be a way in the future for us to choose the coin we want to mine on Zhash? Or will you need to add each coin to the miner? May I ask if you are asking if Bminer can be used to set parameter by yourself? Just asking if I will be able to have Bminer work with ZelCash. As it only works on BTG right now? |
|
|
|
We’re pleased to release Bminer 10.1.0. The release provides: - Fix performance regression in BTM mining.
Please see https://www.bminer.me for more details. Happy mining! Will there be a way in the future for us to choose the coin we want to mine on Zhash? Or will you need to add each coin to the miner? |
|
|
|
We’re pleased to release Bminer 10.0.0 The release provides: - Support mining Zhash (Equihash with parameter set 144,5) based coins.
- Substantially increase BTM mining speed again (up to another 30%).
- Support reported hashrate feature on ETH pools.
Please see https://www.bminer.me for more details. Happy mining! Is this 144_5 only for BTG or are you able to set other pers for other coins? |
|
|
|
Hi, realbminer
any news about Bminer's next version? any new feature? Thanks!
Soon! thanks! are you working on equihash 144,5 already? or you are working on other new algorithms? We need more algorithms. any suggestions to what algorithm to add? thanks! Equihash 144_5 Algo. Equihash 192.7 for Zero coin. |
|
|
|
how can i use , (comma) in passwordfield? %SCHEME%://%USERNAME%:c=BTC,d=1@%POOL% will not working  Take out the "," and just use space. sorry, but the pool won't accept this Any other idea? Where you trying to mine and what is your batch? |
|
|
|
how can i use , (comma) in passwordfield? %SCHEME%://%USERNAME%:c=BTC,d=1@%POOL% will not working Take out the "," and just use space. |
|
|
|
Hello, I have a question for the developers of the bi-miner: why you have not yet released a version for the new algorithm Zhash 144.5 because this algorithm has already transferred several coins such as: BTCZ, BTG, XSG, SAFE, LTCZ, and there will also be others to switch from the Equihash algorithm to escape from the Asiks! Do you plan to release the miner under this algorithm Zhash 144.5, if yes then about when to wait for it  Do you even read? This question has been answered several times already. Take a chill pill. "Sorry, we can't make it today but we will release as soon as we can." Now just wait. |
|
|
|
I am getting all rejected shares
windows 7 gtx 970 and 980
commandline
bminer -uri tensority://bmadress.pc@btm.f2pool.com:9221
all shares rejected
[WARN] [2018-06-30T20:21:02+08:00] Rejected share #4 ([23,"high-hash",null])
any help??
Is that the only pool you try? I used btm.uupool.cn:9221 for 48 hours with only a few bad shares. i just tried that pool got too low difficulty share Maybe the 970 and 980 are too low for it? I only seen 1050 as the lowest. Do any of them go through eventually? |
|
|
|
I am getting all rejected shares
windows 7 gtx 970 and 980
commandline
bminer -uri tensority://bmadress.pc@btm.f2pool.com:9221
all shares rejected
[WARN] [2018-06-30T20:21:02+08:00] Rejected share #4 ([23,"high-hash",null])
any help??
Is that the only pool you try? I used btm.uupool.cn:9221 for 48 hours with only a few bad shares. |
|
|
|
|
