I tried nicehash for 12hrs or so but it stops accepting shares and my miners switched over backup pool. Is there some reason for that ? Or next fucking shitty scam what works few hrs without paying? {
"pools" : [
{
"name" : "NiceHash_X11_Auto",
"url" : "stratum+tcp://stratum.nicehash.com:4336",
"user" : "--------------------------",
"pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=2.6;f7=0",
"profile" : "x11"
},
{
"name" : "NiceHash_X13_Auto",
"url" : "stratum+tcp://stratum.nicehash.com:4337",
"user" : "--------------------------",
"pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=2.6;f7=0",
"profile" : "x13"
},
{
"name" : "NiceHash_X15_Auto",
"url" : "stratum+tcp://stratum.nicehash.com:4339",
"user" : "----------------------------",
"pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=2.6;f7=0",
"profile" : "x15"
},
{
"name" : "NiceHash_X11_Stat",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "----------------------------",
"pass" : "x",
"profile" : "x11"
},
{
"name" : "NiceHash_X13_Stat",
"url" : "stratum+tcp://stratum.nicehash.com:3337",
"user" : "-----------------------------",
"pass" : "x",
"profile" : "x13"
},
{
"name" : "NiceHash_X15_Stat",
"url" : "stratum+tcp://stratum.nicehash.com:3339",
"user" : "-------------------------------",
"pass" : "x",
"profile" : "x15"
},
{
"name" : "WafflePool_X11_EU",
"url" : "stratum+tcp://eu.wafflepool.com:3331",
"user" : "-------------------------------",
"pass" : "x",
"profile" : "x11"
},
.
.
.
there is normal btc address, just edited to -----
any ideas ? now its working more than 18hrs without any issue, good job,, Im using sgminer-5.0-pre-release-2014-06-30-win32 from nicehash web I reccomend use mem and engine frequencies from your old miner drivers: 14.6 and 14.4 |
|
|
|
I tried nicehash for 12hrs or so but it stops accepting shares and my miners switched over backup pool. Is there some reason for that ? Or next fucking shitty scam what works few hrs without paying? {
"pools" : [
{
"name" : "NiceHash_X11_Auto",
"url" : "stratum+tcp://stratum.nicehash.com:4336",
"user" : "--------------------------",
"pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=2.6;f7=0",
"profile" : "x11"
},
{
"name" : "NiceHash_X13_Auto",
"url" : "stratum+tcp://stratum.nicehash.com:4337",
"user" : "--------------------------",
"pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=2.6;f7=0",
"profile" : "x13"
},
{
"name" : "NiceHash_X15_Auto",
"url" : "stratum+tcp://stratum.nicehash.com:4339",
"user" : "----------------------------",
"pass" : "f0=0;f2=0;f3=4;f4=3;f5=0;f6=2.6;f7=0",
"profile" : "x15"
},
{
"name" : "NiceHash_X11_Stat",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "----------------------------",
"pass" : "x",
"profile" : "x11"
},
{
"name" : "NiceHash_X13_Stat",
"url" : "stratum+tcp://stratum.nicehash.com:3337",
"user" : "-----------------------------",
"pass" : "x",
"profile" : "x13"
},
{
"name" : "NiceHash_X15_Stat",
"url" : "stratum+tcp://stratum.nicehash.com:3339",
"user" : "-------------------------------",
"pass" : "x",
"profile" : "x15"
},
{
"name" : "WafflePool_X11_EU",
"url" : "stratum+tcp://eu.wafflepool.com:3331",
"user" : "-------------------------------",
"pass" : "x",
"profile" : "x11"
},
.
.
.
there is normal btc address, just edited to -----
any ideas ? |
|
|
|
server=1
listen=1
rpcuser=x
rpcpassword=x
rpcport=25551
server=1
addnode=185.49.144.66
addnode=209.73.144.179 This is my file.conf, block 284. Dedicatedpool block 388 WHY?  ??  same here, it doesnt work |
|
|
|
Block 271, we are on the correct fork now. Come on join us, we need more hashrate ! 10% of our fees go to block finders!! http://pure.minerpools.comWrong block 188 is correct  |
|
|
|
|
lol PURE chaos.... relauch
|
|
|
|
ASUSR9280X-DC2-3GD5 sgminer.exe -k x11mod -o <host> -u <user> -p <pass> -I 19 -g 2 --gpu-memclock 1500 --gpu-engine 1090 --gpu-fan 70 --gpu-powertune 20 --thread-concurrency 8192 --lookup-gap 2
Only got ~2.5MH with lastest driver & rom   try just GPU_MAX_ALLOC_PERCENT=100
sgminer -o <host> -u <user> -p <pass> -k x11mod -I 18 -g 2 -w 256 --thread-concurrency 8192 --gpu-engine 1100 --gpu-memclock 1425
|
|
|
|
I have tried now the latest SGMiner from this link: https://www.dropbox.com/s/59lvecndm866bzz/sph-sgminer_x11mod_b2.zip and getting following results: 280x -> 3,33Mh/s 290 -> 3,73 Mh/s Config (280x,280x,290): sgminer --kernel x11mod -o stratum+tcp://useast.blackcoinpool.com:3333 -u UserName.1 -p x -I 15,15,15 -w 128,128,256 --thread-concurrency 8192,8192,25601 --gpu-memclock 1500,1500,1250 --gpu-engine 1090,1090,1000 --gpu-fan 60 --gpu-powertune 20 -g 2,2,4 The pool is showing hashrate accordingly but I'm seeing this error popping up frequently: getaddrinfo() in setup_stratum_socket() returned 11001: No such host is knownWhat is this error? this error is because there is sgminer.conf with undefinied pool, just rename this file to sgminer.co or something else if you use your own .bat file to run. btw this miner work fine for me, everything is ok, and with -I 18 I get 7970 = 3,350 Mh, 7950 = 2,950 Mh  |
|
|
|
good job, tested one 7950 2% ver 2,735 Mh -k darkcoin -g 1 --thread-concurrency 8192 --intensity 18 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 10
-X11mod 2,730 Mh -k x11mod -I 15 -w 256 --gpu-threads 2 --thread-concurrency 8192 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 20
Tried these settings on my Sapphire 7950 and didn't work. So I'm running it 'as is' right now, with the provided config (changed pool ofcourse). I'm getting 2.3 - 2.4 Mh/s vs. 1.8 Mh/s normally  What I do notice is that my card runs at 59 degrees now vs. 71 before. Does that mean I should be able to push it more? this one is 7950 gigabite, try use 14,3 or 14,4 drivers |
|
|
|
This miner is so fake. I have the same hash as with regular miner, 2% miner gives me 40% more. Tried lots of diferent setings and it's all the same. Went back to 2% miner.
you have to change -k darkcoin to -k x11mod |
|
|
|
|
on other rigs with 7970s and 280Xs I'm able to set --gpu-engine 1100, same drivers etc, so there is about 3,100 Mh/card and WU about 0.045, solo mining works fine too. I stay on this version .)
|
|
|
|
7970 - same hash as 2% version = 3,000 Mh per card /+-0.5%/ WU=0.040-0.055 -k x11mod -I 15 -w 256 --gpu-threads 2 --thread-concurrency 8192 --gpu-engine 1050,1050 --gpu-memclock 1500,1500 --gpu-powertune 20
but I can't set more than 1050 gpu engine. If more, there is some issue with hw errors or so.../unstable/ I will try 14.4 beta for compare interesting is that on same rig with 2x7970: 2% ver ~ 6,090 Mh - WU=0.085 - pool worker diff = 1000-1200 This ver ~ 6.000 Mh - WU=0.095 - pool worker diff = 1500 |
|
|
|
you mean 14.4 driver and not 13.4 beta driver.
yep too much weed .) corrected edit: I have 14,3 beta installed, not 14,4. I didnt test 14,4 yet |
|
|
|
good job, tested one 7950 2% ver 2,735 Mh -k darkcoin -g 1 --thread-concurrency 8192 --intensity 18 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 10
-X11mod 2,730 Mh -k x11mod -I 15 -w 256 --gpu-threads 2 --thread-concurrency 8192 --gpu-engine 1100 --gpu-memclock 1250 --gpu-powertune 20
I will test 7970 later, but seems to be ok...just share diff is still 0,000 but pool showing full speed, so thats ok be sure you have 14,3 beta drivers installed for better performance |
|
|
|
Info for the .conf file for solo miners?
look at myriadcoin, it will be the same |
|
|
|
vela stastia .) som zvedavy ako sa to uchyti |
|
|
|
minep.it works beautiful, now if i only could get me wallet to sync  Add this node to your conf file addnode=rtc.hashhot.com, and it will sync fast and easy. ive done that still no sync this is the entire .conf file you should create in rightcoin directory, named rightcoin.conf rpcuser=Username rpcpassword=Password daemon=1 server=1 listen=1 gen=0 rpcport=15106 maxconnections=300 rpcallowip=127.0.0.1 addnode=rtc.hashhot.com after setting this up, save it, restart wallet and all should be working good ive done that process several times now but stil no sync where did you download your wallet try addnode=209.73.144.179 addnode=37.187.241.168 addnode=188.26.107.82 addnode=119.116.72.133 addnode=24.79.225.168 addnode=108.163.232.220 addnode=37.146.193.14 addnode=95.43.217.4 addnode=77.109.198.197 addnode=98.126.73.2 |
|
|
|
|
Show Posts
