 Show Posts
|
|
Pages: [1]
|
|
Mr. Phoenix thnx for answering me about my problem with NVIDIA setup, mixed rig AMD and Nvidia...it worked...
|
|
|
|
|
Mr. Phoenix...how can i set the new Phoenix 4.5c miner with Nvidia Inspector to run P0 mode, when im using it is reseting my settings made by nvidia inspector and lowers the core to -200 and memory to -1000 ( it stays in P0 mode) but the hashrate drops from 31 MHS to 24 MHS. Why is this version not working with nvidia inspector like the version 4.2c?
|
|
|
|
|
With 7x nvidia cards you should mine BEAM instead of ETH for making profit...
|
|
|
|
|
You should try another pool ( maxhash PPLNS) or maybe try solo mining luck with that hashrate i would try ETC solo mining for a week. With ethermine pool you want have the opurtunity because of to many miners to see what can cards do( to many stale shares)Solo pools are more optimised then PPLNS pools. Im only solo mining. You must make calculation on dificulty (TH!!!) your cards find on 24 h basis, but that you want find on ethermine. You should try solo mining pools (maxhash, 2miners,altpool,coinmining, clona).
|
|
|
|
|
Reported hashrate and effective hashrate on a pool a difference of 5% is normal when mining.
What versions of RX 570 do you have?
|
|
|
|
I have 4 GPU but in 4.0b it's show 8 GPU :| after few sec it be close automatically 2018.12.10:10:45:57.670: main No CUDA driver found
2018.12.10:10:45:59.996: main OpenCL driver version: 18.10/11
2018.12.10:10:45:59.996: main OpenCL driver version: 18.8/9
2018.12.10:10:45:59.996: main Available GPUs for mining:
2018.12.10:10:45:59.996: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU2: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU4: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU5: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU6: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU7: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:45:59.996: main GPU8: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.12.10:10:46:00.015: main ADL library initialized reinstall driver (clean uninstall first) For AMD cards you should use Adrenalin driver version 18.3.(1-4) for NVIDIA cards you should use from 391.35 to 399.24 geforce versions. With those versions of drivers you should not have any issues... |
|
|
|
|
For AMD cards use only 18.3.4 version Adrenalin , for Nvidia 391.35 drivers those are the most stable drivers for mining with Phoenix 3.0c.
|
|
|
|
|
Miner must be agressive if you want to get the the benefit from mining..
|
|
|
|
|
You dont need any antivirus on the system if your running miner.This miner is 100% clean and is the fastest miner you can get with its lowest fee.
|
|
|
|
Core clock should be use to lower the load on memmory but should never get over +150, and this also lower the power to get the card running between 80 and 100 watts with reduced power limit between 50 and 60% Here you have a good guide how to overclock nvidia cards https://mining.help/nvidia-ethereum-mining/ |
|
|
|
These are my results:
Version 2.9e running very stable for 17 hours testing with :
GPU1 Nvidia GTX 1070, MICRON
GPU2 AMD RX 570 NITRO, MICRON
GPU3 Nvidia GTX 1070,MICRON
Power consumption 398W
*** 17:47 ***************************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 17:47
Eth speed: 96.655 MH/s, shares: 1534/0/0, time: 17:47
GPUs: 1: 32.608 MH/s (528) 2: 31.256 MH/s (470) 3: 32.791 MH/s (536)
Eth: Accepted shares 1534 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 35.3 TH (!!!)
Eth: Average speed (5 min): 96.613 MH/s
Eth: Effective speed: 95.82 MH/s; at pool: 95.82 MH/s
About stale shares miner reports zero, but on pool ETHERMINE average max 1 or 2%....
Keep up the good work...
What kind of GTX1070s do you have man? I am currently thinking of buying a couple and want to be sure I don't mess up with the order  GPU1 Gigabyte Windforce TDP 51% , core clock +160, Memory +756 ( temp 45C fan 55%) core can go over +200 and memory around +800 it can go much over 33MH .. GPU3 MSI Armor TDP 52%, core clock +31 memory +772 (temp 54 fan 55%) core can go higher around +100 and memory around +800 it also can go higher then 33MH.. Both cards can get higher then 33 if power up TDP, but then i get higher power consumption... It does not matter which brand you would get just look which has more warranty, every GTX 1070 can go around 32 and 33 just need some time to test the settings... Runing 50 hours and still very stable no rejected shares and stale shares are the same as before *** 50:01 ***************************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 50:01
Eth speed: 96.689 MH/s, shares: 4243/0/0, time: 50:01
GPUs: 1: 32.533 MH/s (1404) 2: 31.361 MH/s (1399) 3: 32.796 MH/s (1440)
Eth: Accepted shares 4243 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 35.3 TH (!!!)
Eth: Average speed (5 min): 96.650 MH/s
Eth: Effective speed: 94.23 MH/s; at pool: 94.23 MH/s
Eth: New job #8bed6702 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 96.687 MH/s, shares: 4243/0/0, time: 50:02
GPUs: 1: 32.532 MH/s (1404) 2: 31.360 MH/s (1399) 3: 32.796 MH/s (1440)
Eth: New job #04873144 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 96.687 MH/s, shares: 4243/0/0, time: 50:02
GPUs: 1: 32.532 MH/s (1404) 2: 31.360 MH/s (1399) 3: 32.795 MH/s (1440)
GPU1: 44C 55%, GPU2: 43C 40%, GPU3: 54C 55%
Eth speed: 96.688 MH/s, shares: 4243/0/0, time: 50:02
GPUs: 1: 32.532 MH/s (1404) 2: 31.360 MH/s (1399) 3: 32.796 MH/s (1440)
Eth: New job #b3a786a1 from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth: New job #8e88f5ce from ssl://eu1.ethermine.org:5555; diff: 4000MH
Eth speed: 96.689 MH/s, shares: 4243/0/0, time: 50:02
GPUs: 1: 32.533 MH/s (1404) 2: 31.361 MH/s (1399) 3: 32.795 MH/s (1440)
Eth speed: 96.688 MH/s, shares: 4243/0/0, time: 50:02
Power from the wall reduced it from 398Watts to 392,3 Watts
|
|
|
|
Do you really mean core voltage or isn't it core clock!?
Yes it is core clock not core voltage.... |
|
|
|
GPU1 Gigabyte Windforce TDP 51% , core clock +160, Memory +756 ( temp 45C fan 55%) core can go over +200 and memory around +800 it can go much over 33MH ..
GPU3 MSI Armor TDP 52%, core clock +31 memory +772 (temp 54 fan 55%) core can go higher around +100 and memory around +800 it also can go higher then 33MH..
Can you tell me what's the benefit of setting the TDP to such an low value together with increasing the core voltage? What speed (core clock) are your cards running at with these settings? Diferrent cards diffrent settings those are my cards: Cards are getting 32.7MH and 32.8MH with these settings TDP 51% 52% low wattage, temperature , running very stable at these TDP no rejected shares and very low stale shares.. |
|
|
|
These are my results:
Version 2.9e running very stable for 17 hours testing with :
GPU1 Nvidia GTX 1070, MICRON
GPU2 AMD RX 570 NITRO, MICRON
GPU3 Nvidia GTX 1070,MICRON
Power consumption 398W
*** 17:47 ***************************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 17:47
Eth speed: 96.655 MH/s, shares: 1534/0/0, time: 17:47
GPUs: 1: 32.608 MH/s (528) 2: 31.256 MH/s (470) 3: 32.791 MH/s (536)
Eth: Accepted shares 1534 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 35.3 TH (!!!)
Eth: Average speed (5 min): 96.613 MH/s
Eth: Effective speed: 95.82 MH/s; at pool: 95.82 MH/s
About stale shares miner reports zero, but on pool ETHERMINE average max 1 or 2%....
Keep up the good work...
What kind of GTX1070s do you have man? I am currently thinking of buying a couple and want to be sure I don't mess up with the order GPU1 Gigabyte Windforce TDP 51% , core clock +160, Memory +756 ( temp 45C fan 55%) core can go over +200 and memory around +800 it can go much over 33MH .. GPU3 MSI Armor TDP 52%, core clock +31 memory +772 (temp 54 fan 55%) core can go higher around +100 and memory around +800 it also can go higher then 33MH.. Both cards can get higher then 33 if power up TDP, but then i get higher power consumption... It does not matter which brand you would get just look which has more warranty, every GTX 1070 can go around 32 and 33 just need some time to test the settings... |
|
|
|
|
These are my results:
Version 2.9e running very stable for 17 hours testing with :
GPU1 Nvidia GTX 1070, MICRON
GPU2 AMD RX 570 NITRO, MICRON
GPU3 Nvidia GTX 1070,MICRON
Power consumption 398W
*** 17:47 ***************************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 17:47
Eth speed: 96.655 MH/s, shares: 1534/0/0, time: 17:47
GPUs: 1: 32.608 MH/s (528) 2: 31.256 MH/s (470) 3: 32.791 MH/s (536)
Eth: Accepted shares 1534 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 35.3 TH (!!!)
Eth: Average speed (5 min): 96.613 MH/s
Eth: Effective speed: 95.82 MH/s; at pool: 95.82 MH/s
About stale shares miner reports zero, but on pool ETHERMINE average max 1 or 2%....
Keep up the good work...
|
|
|
|
|
