PhoenixMiner (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 11:40:53 AM |
|
The -logsmaxsize option defines the max size of all log files, not a single file, so 200 MB should be adequate if you want to keep a history for the last few weeks (or months). We don't have a limit of the size of a single logfile but it may be added in the future. Strange solution. Never seen that. For example in java there is RollingFileAppender ( https://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/RollingFileAppender.html) which creates new log file when current file has reached limit size. I waited to have the same functionality, and I think that not only me. If the current behaviour is like you have described, then can you please to use parameter 0 as recomendation do not delete logs (so limit is absent). It already works like that: -logsmaxsize 0 turns off the automatic removal of oldest log files on startup. As for the limit on the size of individual log files - this is good idea and may be implemented in the future versions of the miner. After running PM 2.9d for few days yes it "SHOWS" higher hash rate but the time it takes to CLEAR a block for me INCREASED as apposed to running CL some would say difficulty increased ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Id have to run it for 2 weeks to collect data and then switch back to CL and collect more data to eliminate that theory As we stated many times, the best way to compare is to see the shares (assuming the same share difficulty!) over some time period (not too short to avoid luck being too much of a factor). Note that PhoenixMiner already does these calculations for you and shows you the effective hashrate, even if you switch to pools with different difficulty. Tried Phoenix 2.8c today. Mostly good, but have a problem with the remote monitoring. I have a basic python script using sockets to monitor all rigs and send me alerts if things go wrong. This works with claymore, which says it uses raw TCP/IP connections (not HTTP) for remote management. This same script does not work with Phoenix, and hangs when waiting for data from the miner. It sends the request JSON as per the claymore API {"id":0,"jsonrpc":"2.0","method":"miner_getstat1"}It then waits for the response, expecting {"result": ["9.3 - ETH" ... data, but it never gets any data. It uses the socket.recv(1024) method which blocks until there is some data to be read. The remote monitoring is enabled, and responds to HTTP requests on 3333, showing a html version of the console. Interestingly claymore's EthMan.exe does work and can see the rigs using Phoenix. The devs say "Phoenix miner is fully compatible with Claymore's dual miner protocol for remote monitoring and management.", so am I correct to assume that phoenix should support the raw TCP/IP requests in JSON format? It's a pretty simple script, that works with claymore, perhaps someone can see if I'm doing something wrong, here is a stripped down version that hangs when waiting for data from the miner. Anyone else got monitoring scripts working with Phoenix? Any idea what could be going wrong? You have to add new line (\n) after the end of your JSON request.
|
|
|
|
|
|
|
|
|
You can see the statistics of your reports to moderators on the "Report to moderator" pages.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
MoNTE48
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 01:29:13 PM |
|
Hi. What about Linux version?
|
|
|
|
BlackPrapor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 01:36:07 PM |
|
Guys, both of you are having issues with math, or you're not aware of dual mining. Here's how it goes for me atm: Eth $28,43, Monero $30,22 and Dual Eth+XVG $34. This is real Eth+Xvg profit, not the one estimated by WTM on the number of coins you're "supposed" to get (which would be $37). You're welcome =)
P.S: not sure why would someone use this solo miner at all, when dual is always more profitable, even with higher fees.
You have issues with the math. 25ish cards should earn you this profit daily, so if you factor the 0.5% devfee, the increased power draw of 40 watts per card, add the additional stress on the GPU, cooling, PSU, fans, heat output, air conditioning - you are basically running at a very slim margin. When I say "in my case", it means I measured everything, with wattmeter, including power loss in cables. I don't count asset depreciation since my rigs have made 3+ fold profit already. Calculations above actually use same power draw for Eth and Eth+xvg. For Eth solo it should be less, as you noted, but its not much difference in $, since my electricity costs around 3 cents US and I don't use aircon, because its 0 degrees outside temperature =). Hope this clears things up.
|
There is no place like 127.0.0.1 In blockchain we trust
|
|
|
Iamtutut
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 02:25:46 PM |
|
2.9e running for 45mn, so far so good.
|
|
|
|
G.Geo
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 03:20:36 PM |
|
Started using this new miner.
Seems alright, slightly better than Claymore's. Slightly better is good for me, thats an improvement, thanks
|
|
|
|
syraka76
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 83
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 03:28:31 PM |
|
seems ok, but I encountered a problem, I use the remote manager of claymore, and works on everything, but with version 2.9e and only sees the AMD, the gtx says that they are not connected, instead turn quietly, you happen? ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif)
|
|
|
|
skinnyfalcon
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 03:37:01 PM |
|
Guys, both of you are having issues with math, or you're not aware of dual mining. Here's how it goes for me atm: Eth $28,43, Monero $30,22 and Dual Eth+XVG $34. This is real Eth+Xvg profit, not the one estimated by WTM on the number of coins you're "supposed" to get (which would be $37). You're welcome =)
P.S: not sure why would someone use this solo miner at all, when dual is always more profitable, even with higher fees.
Please let me know which miner dual mines Eth+Xvg, its definitely not Claymore.
|
|
|
|
rodyw
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 05:08:59 PM |
|
PhoenixMiner 2.9e is officially released.
The only reason why this miner is not running for more then a few days is because you guys keep releasing new versions! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
Iamtutut
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 05:50:23 PM |
|
2.9e running for 45mn, so far so good.
Even with my weak GPU (out of 3), reported hashrate is 92,2MH/s. At the pool (nanopool), it's even better.
|
|
|
|
fimatiku
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 07:10:08 PM |
|
You mean 800-900 sols when your DUAL mining ? your power usage increases , heat increases for $1 more in coins earned ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? Solo mining RX580 = 290-330 sols depends on card +++++++++++++++++ 14/04/2018 20:38:04 5714641 5716744 11.0 1.00946 ETC 0xfe5733d2... 14/04/2018 09:36:41 5712251 5714609 12.3 1.01330 ETC 0xd9515786... 13/04/2018 21:15:51 5709895 5712225 12.0 1.00760 ETC 0xb2615874... 13/04/2018 09:18:08 5707639 5709873 11.7 1.00323 ETC 0x406cc670... 12/04/2018 21:35:55 5705340 5707609 11.8 1.01310 ETC 0xed2e0ba5... 12/04/2018 09:45:51 5703085 5705311 11.4 1.00188 ETC 0x72bb42e8... 11/04/2018 22:20:37 5700660 5703070 12.1 1.01105 ETC 0xd34695e3... 11/04/2018 10:15:30 5697853 5700630 13.1 1.01013 ETC 0xa82ff52f... <<--- one rig went down for 8 hours 10/04/2018 21:10:08 5695480 5697809 10.8 1.00804 ETC 0x65e2dcda... 10/04/2018 10:23:27 5693097 5695452 10.9 1.01070 ETC 0xaaa7cd58... 09/04/2018 23:28:24 5690677 5693065 11.2 1.00921 ETC 0x44a5ee88... 09/04/2018 12:16:50 5688227 5690651 11.2 1.00161 ETC 0x21ad7b91... 09/04/2018 01:04:36 5685695 5688200 11.9 1.00770 ETC 0x08bc6c6c... 08/04/2018 13:12:29 5683175 5685663 11.4 1.00608 ETC 0x1b3f959f... 08/04/2018 01:50:41 5680683 5683144 11.2 1.00509 ETC 0x3c30f7d4... 07/04/2018 14:37:21 5678117 5680643 11.8 1.00373 ETC 0x0b6b0ccb... 07/04/2018 02:51:09 5675466 5678098 12.2 1.00958 ETC 0x638aac5e... +++++++++++++++++ If you got math issues in roll in the nearest educational institute thats my copy paste from eth classic as u can see I get 1etc every 11-12 hours that = to 2+ etc a day each worth $16 * 2 = $32+ a day or every 22-24 hours Switched to Ether mining seems to make $41 a day or .07 ether in 24 hours
|
|
|
|
Digital_Seytan
Jr. Member
Offline
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/angry.gif) |
April 15, 2018, 10:38:16 PM |
|
What are we still happy with phoenixminer 2.9.e the stale shares are back again, while it was with the 2.9 .d away the joy is so short-lived unfortunately.
|
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
lesjokolat
Jr. Member
Offline
Activity: 117
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 10:47:04 PM |
|
What are we still happy with phoenixminer 2.9.e the stale shares are back again, while it was with the 2.9 .d away the joy is so short-lived unfortunately.
I am going to guess its your system, I have less stale shares as well as fewer incorrect ones being generated. I will say its been only around 7 hrs so far. What cards and drivers are you running?
|
|
|
|
beastman
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 15, 2018, 11:37:36 PM |
|
What are we still happy with phoenixminer 2.9.e the stale shares are back again, while it was with the 2.9 .d away the joy is so short-lived unfortunately.
I am going to guess its your system, I have less stale shares as well as fewer incorrect ones being generated. I will say its been only around 7 hrs so far. What cards and drivers are you running? Indeed the system, try re-installing your drivers. I've been updating as the releases come out since 2.7c and to date 2.9d & 2.9e seem to stay under 0.10% in my case. I'm using rx580 4 & 8Gb, one click patch, OC/UV done via Phoenix settings and running latest Adrenalin 18.2.3 feb 22. Hope this helps, good luck.
|
|
|
|
fimatiku
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 12:23:54 AM |
|
I got 0.05011 ETH + 0.03329 ETH in 24 hours...................how many dollars is that ? sounds like $43 in 24 hours let me know how much u get with monero ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ? or whatever other crap zCash getto coin your wasting your time on........ lets not have smart asses here and keep it to original RX570/580 cards and not flash out GTX's
|
|
|
|
janding
Jr. Member
Offline
Activity: 170
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 02:11:09 AM Last edit: April 16, 2018, 05:15:35 AM by janding |
|
What are we still happy with phoenixminer 2.9.e the stale shares are back again, while it was with the 2.9 .d away the joy is so short-lived unfortunately.
I am going to guess its your system, I have less stale shares as well as fewer incorrect ones being generated. I will say its been only around 7 hrs so far. What cards and drivers are you running? Indeed the system, try re-installing your drivers. I've been updating as the releases come out since 2.7c and to date 2.9d & 2.9e seem to stay under 0.10% in my case. I'm using rx580 4 & 8Gb, one click patch, OC/UV done via Phoenix settings and running latest Adrenalin 18.2.3 feb 22. Hope this helps, good luck. I've tried lots of times to let people know that they're reading stale share incorrectly. Your stale share rate is not 0.10% like you state. First, pools don't report stale shares in percentages less than 1% Second you don't get your real stales shares rate from the miner display. You can ONLY know what your real stale share rate is at the pool, not the miner display. I also have been tracking the stale shares when trying each version of PhoenixMiner. I will say Phoenix has improved to the point it is almost as good as Claymore, but not quite as good. I get between 1 and 4% stale shares from Phoenix and 1 to 3% on Claymore. SO, it is very close and with the slightly reduced fee it makes it equal. People should read all the info the miner developers publish and try to understand what they're looking at. From page 1 of PhoenixMiner:Q005: Why is the percentage of stale shares reported by PhoenixMiner smaller than the one shown by the pool? A: PhonixMiner can only detect the stale shares that were discovered after it has received a new job (i.e. the "very stale") shares. There is additional latency in the pool itself, and in the network connection, which makes a share stall even if it was technically found before the end of the block from the miner's point of view. As pools only reports the shares as accepted or rejected, there is no way for the miner to determine the stale shares from the pool's point of view.
|
|
|
|
anbe2305
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 08:45:13 AM |
|
These are my results:
Version 2.9e running very stable for 17 hours testing with :
GPU1 Nvidia GTX 1070, MICRON GPU2 AMD RX 570 NITRO, MICRON GPU3 Nvidia GTX 1070,MICRON
Power consumption 398W
*** 17:47 *************************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 17:47 Eth speed: 96.655 MH/s, shares: 1534/0/0, time: 17:47 GPUs: 1: 32.608 MH/s (528) 2: 31.256 MH/s (470) 3: 32.791 MH/s (536) Eth: Accepted shares 1534 (0 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% Eth: Maximum difficulty of found share: 35.3 TH (!!!) Eth: Average speed (5 min): 96.613 MH/s Eth: Effective speed: 95.82 MH/s; at pool: 95.82 MH/s
About stale shares miner reports zero, but on pool ETHERMINE average max 1 or 2%....
Keep up the good work...
|
|
|
|
khafan11
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 08:46:43 AM |
|
PhoenixMiner 2.9e is officially released. Note that there are changes since 2.9d, so if you are running 2.9d, you should upgrade to this version. Here is the list of changes since the last beta version 2.9e (the full list of changes since the last official release can be seen in the first post of this thread): - Added detection of AMD Compute mode in the supported drivers and GPUs. The detection is performed when the miner starts and if the Compute mode is off on some of the GPUs, you will get warning messages.
- Added console command 'y' to turn on the AMD Compute mode if it is not turned on on some of the cards.
- Small improvement in the -logfile option: now you can insert $ chararcter in the name, which will be removed from the name but will force the miner to overwrite the log file on each startup, instead of appending to it.
- Fixed a problem with miner restart on some CUDA errors with Nvidia cards when the miner crashes instead of restarting.
- Some other small fixes and changes
You can download 2.9e from here: https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBwChecksums to verify your download: File: PhoenixMiner_2.9e.zip SHA-1: e2b9c72e561ac0fdb4e3c9ebddd7d703a35da36c SHA-256: 9817c89623025cf392a4e800a41cff96a87eee02e241d9f08d62dc43e0975e96 SHA-512: 33c78a73a53791c01bbfff2ad830ffd40d4007f69ca329300815ab1c189f744aafdc6683033cfcb0315db7f322e6dee44181b9dff2922b1fb408b0f04dba163b We are now working on 3.0, which will include auto-tuning capabilities and more. i'm back to 2.8C , i had better hashrate with that ! RX580 8Gb MSI Gameing X
|
|
|
|
Sandro6666
Newbie
Offline
Activity: 9
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 08:53:59 AM |
|
PhoenixMiner 2.9e is officially released. Note that there are changes since 2.9d, so if you are running 2.9d, you should upgrade to this version. Here is the list of changes since the last beta version 2.9e (the full list of changes since the last official release can be seen in the first post of this thread): - Added detection of AMD Compute mode in the supported drivers and GPUs. The detection is performed when the miner starts and if the Compute mode is off on some of the GPUs, you will get warning messages.
- Added console command 'y' to turn on the AMD Compute mode if it is not turned on on some of the cards.
- Small improvement in the -logfile option: now you can insert $ chararcter in the name, which will be removed from the name but will force the miner to overwrite the log file on each startup, instead of appending to it.
- Fixed a problem with miner restart on some CUDA errors with Nvidia cards when the miner crashes instead of restarting.
- Some other small fixes and changes
You can download 2.9e from here: https://mega.nz/#F!2VskDJrI!lsQsz1CdDe8x5cH3L8QaBwChecksums to verify your download: File: PhoenixMiner_2.9e.zip SHA-1: e2b9c72e561ac0fdb4e3c9ebddd7d703a35da36c SHA-256: 9817c89623025cf392a4e800a41cff96a87eee02e241d9f08d62dc43e0975e96 SHA-512: 33c78a73a53791c01bbfff2ad830ffd40d4007f69ca329300815ab1c189f744aafdc6683033cfcb0315db7f322e6dee44181b9dff2922b1fb408b0f04dba163b We are now working on 3.0, which will include auto-tuning capabilities and more. Unfortunately still crashes after CUDA errors with Nvidia gtx 1070 cards. The last one that restart well after CUDa errors is 2.7c for me.
|
|
|
|
murgorx
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 443
Merit: 13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 08:59:43 AM |
|
These are my results:
Version 2.9e running very stable for 17 hours testing with :
GPU1 Nvidia GTX 1070, MICRON GPU2 AMD RX 570 NITRO, MICRON GPU3 Nvidia GTX 1070,MICRON
Power consumption 398W
*** 17:47 *************************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 17:47 Eth speed: 96.655 MH/s, shares: 1534/0/0, time: 17:47 GPUs: 1: 32.608 MH/s (528) 2: 31.256 MH/s (470) 3: 32.791 MH/s (536) Eth: Accepted shares 1534 (0 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% Eth: Maximum difficulty of found share: 35.3 TH (!!!) Eth: Average speed (5 min): 96.613 MH/s Eth: Effective speed: 95.82 MH/s; at pool: 95.82 MH/s
About stale shares miner reports zero, but on pool ETHERMINE average max 1 or 2%....
Keep up the good work...
What kind of GTX1070s do you have man? I am currently thinking of buying a couple and want to be sure I don't mess up with the order
|
|
|
|
Watjila
Newbie
Offline
Activity: 58
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 16, 2018, 09:06:34 AM |
|
PhoenixMiner 2.9e is officially released.
The only reason why this miner is not running for more then a few days is because you guys keep releasing new versions! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) So far, 2.9e is quite stable.
|
|
|
|
|