Latest posts of: Darkeind

Hello,

I dont know if you can help me but I have a problem with my RX 580 radeon pulse under window 10. When I launch claymore I have 22 Mhs with a memory clock of 2000Mhz. However when I overlock the 580 with afterburner to 2100Mhz or higher the Mhs does not change and stay at 22. it is really strange because I can overlock my 1060 with not problems.

Do you know what the issue could be? Or do you know where I can find the answer?

Thanks a lot in advance

This is probably because of the driver you have installed.

If you are running in Windows 10 you MUST install the AMD Crypto mining BETA driver if you want to get your hashrate up to around 27 to 30 MH/s on a 580.

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

I had the exact same problem. I had the latest Catalyst Crimson drivers installed and I couldn't get higher than 22 MH/s, no matter what I did.

Then I uninstalled those drivers with DDU, and installed the AMD Crypto Mining BETA drivers, and I was immediately able to get 31 MH/s, but with some errors. After some fine tuning I can now get 28 MH/s on every RX580 in my rigs, with zero errors.

It's the driver.

With the crimson relive drivers post Oct 24th you need to switch to compute workload by Right click > AMD settings > Gaming > Global settings > change GPU workload to Compute instead of Graphics.
Need to do this for all gpu individually. You would get same hashrate as the blockchain drivers.

Hi guys, I had the special driver just as bellow but I was block to 22. I tried the last driver and i used the Compute instead of Graphics option but it changed nothing even with 2150 i get 22. Any other idea?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx