Are you still donating coupons for an s9i?

brianjcappello@gmail.com

Thanks for the advice. i wasnt at my house to take a picture with it and i havent been on since. I will take one first thing tomorrow with my username and date.

Located in Florida, USA.

Hey all

I have a Avalon 741 with everything needed 1200w server PSU and auc cables and it was purchased back in Feb 18

Open to offers; selling for BTC
Shipping- I would prefer to sell to someone else in the States, im in FL.
ESCROW is a must.
Used; all working condition getting just about 7.3-7.4 T/h

Would like to get Bitcoin for it. Make an offer.





https://www.imgur.com/gallery/U4Jlmyi
http://imgur.com/gallery/DM0kIZb

it says there is no program to open the file. what is the chmod thing you were talking about. i appreciate your patience with me im downloading zclassic electrum wallet right now and have done bitcoin in the past and it always had to be through terminal, but i was always able to find exactly what to type in terminal.

if lcc qt can just be executed that will be awesome! i just must be missing a step then

for LINUX? when i downloaded from litecoinca.sh there was no executable file. it only had "share" and "bin" in it. nothing that was executable. what am i missing lol?

i may be interested in mining litecoin cash on your pool. what exchange are you using to convert it to btc? want to be able to figure out how much i will approximately get for each LCC mined. thanks!

can someone point me in the direction on how to install litecoin cash qt wallet on Linux. Im guessing its similar to how i installed bitcoin core but it was a while ago. i have already downloaded to file from the website. im guessing i need to run something in terminal now. I appreciate your help

Hello all

So I have been running my 741 in my shed for a few weeks now with a fan exhausting heat out the window. Unfortunately I am having to leave the door cracked since I don't have intake vents cut yet. I have a s9 coming and planning on building a GPU rig

I was wondering if I used Cool Attic CX1000AMUPS Power Attic Roof Mount Ventilator with 3.4 Amp 60 Hz Motor and Steel Flange, Galvanized Steel Dome https://www.amazon.com/dp/B00B54UQSG/ref=cm_sw_r_cp_apa_IE0KAbYCC37XT to exhaust could I just use the window as air intake (window is about 20"x13" when it is opened up)

If I can use that fan for exhaust will I need 1 or 2? They are rated at 1080 cfm each.

Would the window be enough for intake? If not home Depot has cheap vents I can put in  the door (opposite the window).

Thanks for your help I'm not really well versed in air flow and how to maximize this set up. I can provide pictures if needed.

Hey guys,

I have a S9 on the way and im considering selling my 741 because i really want to build a rig to mine shitcoins. It has only been running since Jan 10th, and i did pay a little more than the ones selling on blokforge and actually got it from cryptouniverse.at and due to that it was a $200 more than blokforges price in December. So i dont expect to get what I paid for it but it is practically brand new and it great condition. Btw i have been mining a shit coin with it as a test and im surprised at how well it is doing (5-7 coins a day), but who knows it could just drop to zero and i understand that but it was just a gamble to see.

I have posted in on ebay but if i sell it on here i can avoid ebays fees and in addition i want to see it at a fair price since its on the fourm. i dont expect ebay pricing but not sure what ask price to put so if you want to throw out your best offers i will consider.

will accept escrow only, buyer pays fees. I want to make this as legit as possible, so that i can continue to grow my trust here. I have a pic i took when i first got it but since im at my parents today i wont be able to put a pic up with my username and date until tomorrow. I can provide a screenshot of the avalon interface but not sure if that will do to prove its mine, so if you dont mind ill take the pic with concrete proof tomorrow.

CH30

Has anyone downloaded the QT Wallet? Its taking quite along time and taking up a lot of CPU power, like it is doing something in the background other than just downloading the blockchain. Anyone else have this experience?

So I ended up buying a usb to ethernet device and Linux stopped crashing on me. So it must be an issue with the native hardware. Seems to be fine now. Thanks for everyone's help

Sorry that I put this in the wrong place. Do we have a off topic thread for this items?

I have tried Ubuntu 16.04, 17.10.1 and Mint 18 Mate (32 and 64 bit). Everything works fine on wifi. Maybe it's a kernel issue? I just don't know what kernel to up to. Or driver issue? I check the drivers and from what I found online I think they are correct.

Yes it is also happening on live installation usb.

I have ordered a usb to ethernet device to try that out.

From my research it seems like Ethernet isn't tested as much as wifi. This is the only time I have ever really needed Ethernet to work and of course it doesn't.

Not sure what else to try.

No I don't think that is it. That issue is because Linux is being booted along side windows. I got rid of windows.

When I run ifconfig -a everything looks correct. I even have internet for maybe 3 mins before everything freezes and I have to power cycle. Just wish I could figure out why it is hanging.

I have a Toshiba C655d-S5200 which I believe has AMD chipset. I am trying to run Bitcoin Core on either Ubuntu 16.04 or 17.10.1. I think my hardware is too slow for 17.10 but if I'm using WiFi it doesn't freeze.

As soon as I turn off WiFi and connect the Ethernet wire and open anything at all it freezes. No mouse or keyboard input. Have to power cycle to reset.

I have tried this: http://ubuntuguide.net/fix-cannot-connect-to-wired-internet-problem-in-ubuntu-or-ubuntu-vmware-guest

When I did ifconfig it said it wasn't installed. I installed it and then it said eth0 doesn't exist.

I have also tried to reserve an IP and when I go into settings it shows under dchp that it is using the reserved ip but it freezes either way.

Can someone please help me figure this out? I really need to run Bitcoin Core on Ethernet and not wifi.

hello all

so I have had my Avalon 741 running in my garage for now and have an s9 on order.

I go the conduit in the ground and should have electricity run by this weekend.

My concern is the intake and exhaust, I have an existing shed about 10x10 with a window in the back. I'm going to put a shelf right in front of the window and use a fan to pull the air out.

I need help figuring out what fan to use. I have a large vorando fan that I can use in the mean time, but id like to get something more permanent that will fit in the window.

The other issue is intake. I'm going to need to cut wholes in the shed for intake. can you provide any insight on the best way to do this. I will post pictures of my shed after work.

so the only thing that i did that could have caused this issue was updating the firmware on the router. i ended up resetting the router back to original settings, and reset up everything like i did last night and the miner started working again. when i checked to see if a new firmware was available i saw that it was but i decided not to test reinstalling it since i dont have the time to try and fix it if that is the issue.

the firmware im currently running for my router is: Current Version : 3.0.0.4.384_10007-g8e859e9

I am getting the Socket Connect Fail => Connection refused, I understand this has to do with internet connection or pool settings. Nothing have changed in the pool settings its on slush and I don't believe that is the issue.

I did receive a new router and asus rt-86u, everything was working fine for 12 hours. I set up the VPN server on the router and when I logged into the LAN IP address associated with the controller I noticed it wasn't recognizing  the Avalon 741.

This error happened once before with my old router and the issue was the firewall. I had to keep the firewall at a low setting. The Asus has the firewall set to one automatically and it was working fine. I turned off the firewall on the asus and it still isn't working. Anyone have any other suggestions?

also, if anyone has information about how to set the firewall up so that I can still mine but block malicious things please point me in the direction.

ps. I love this router, I have figured out how to set up the vpn, use time machine from the HDD plugged into the router, ssh into the router.. overall it has been fun but I need to get this miner back up.

Okay I will work on it and see what I can do

I'm glad you like it. No one replied for the longest time so I thought it was a bust lol. I'm thinking about getting like a few. I was hoping if people liked them I'd be able to order more at a cheaper price. The design was nothing special but I thought it came out cool.

I could possible make smaller ones than bumper sticker size to go on laptops or something. Definitely can put stickers in more places than just bumpers lol.

so btw the reason this happened was because it wasnt through a eth smart contract. I purchased with coin payments so they manually had to send the tokens to my wallet that was on my account. This goes to show that it may not be a good idea for projects to take currencies other than ETH, it allowed for human error. I still havent received the token yet but i think they are in the uk so its pretty early in the morning there. i really hope they keep their word... im hoping that when this token gets on an exchange ill be able to sell it for a nice profit, maybe even for more than the mistaken amount i received.