Bitcoin Forum
October 13, 2024, 04:00:03 AM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1]
1  Alternate cryptocurrencies / Mining (Altcoins) / Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners on: February 01, 2018, 08:06:45 PM
Hi all from Awesome Miner,
I use the new version of Awesome miner but see some strange figures.
Is this a bug in the program?

See the green,red and blue lines

https://www.dropbox.com/sh/orvmmv8xzsf5a3j/AACfIN_uPFYz-D9g4V8SK6Tka?dl=0
2  Alternate cryptocurrencies / Mining (Altcoins) / Re: Antminer D3 Blissz firmware (2.04 Beta) on: December 23, 2017, 10:52:08 PM
Blissz
Here is my logfile.
Hope you can use it Wink

v2.04 beta :: 22/12 :: test version

Download:
https://mega.nz/#!ulYlTB4D!nEymzPvujO17EXa95q9_oRHAQOxZUZvxu_bulZ8_wUA

Changes 22/12:
- reboots the D3 on high temperatures (> 85 deg PCB temp). This feature will save your unit in case your fans will fail.
- improved auto tune algorithm stability
- Increased the chip starting frequency of the autotune algorithm for higher voltages.

Changes 14/12:
- fixed auto recover from xxxx
- cleaned up kernel logging
- a bit more aggressive tuning
- tunes down faster now when too many HW errors are detected


Changes 13/12:
- Totally rewritten code base, based from latest available bitmain / cgminer sources
- ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed)
- blazing fast mining status overview in the webinterface Cheesy
- as requested: the dev mining starts later now (after 5 minutes)
- as requested: dev pools status is now visible in the miner status


Important: The autotune feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do:

set your advanced settings the same as displayed bellow
let it run for at least 20 minutes
PM your (complete) kernel log
By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be.
In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information

Thank you!



[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238536k/238536k available, 23608k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015438] pid_max: default: 32768 minimum: 301
[    0.015667] Security Framework initialized
[    0.015763] Mount-cache hash table entries: 512
[    0.024598] Initializing cgroup subsys cpuacct
[    0.024630] Initializing cgroup subsys memory
[    0.024693] Initializing cgroup subsys blkio
[    0.024830] CPU: Testing write buffer coherency: ok
[    0.025397] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025474] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026800] Brought up 1 CPUs
[    0.026823] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028127] devtmpfs: initialized
[    0.092513] pinctrl core: initialized pinctrl subsystem
[    0.092731] rstctl core: initialized rstctl subsystem
[    0.093226] regulator-dummy: no parameters
[    0.093803] NET: Registered protocol family 16
[    0.094507] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104173] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104355] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105442] platform 49000000.edma: alias fck already exists
[    0.105475] platform 49000000.edma: alias fck already exists
[    0.105503] platform 49000000.edma: alias fck already exists
[    0.106648] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106830] OMAP GPIO hardware version 0.1
[    0.108231] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109553] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110866] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111497] of_get_named_gpio_flags exited with status 52
[    0.111530] gpio-rctrl rstctl.3: loaded OK
[    0.116631] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119837] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122022] cpsw.0: No hwaddr in dt. Using 50:33:8b:0a:ca:6b from efuse
[    0.122054] cpsw.1: No hwaddr in dt. Using 50:33:8b:0a:ca:6d from efuse
[    0.137616] bio: create slab <bio-0> at 0
[    0.149740] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149983] of_get_named_gpio_flags: can't parse gpios property
[    0.150271] vmmcsd_fixed: 3300 mV
[    0.153390] SCSI subsystem initialized
[    0.153838] usbcore: registered new interface driver usbfs
[    0.153952] usbcore: registered new interface driver hub
[    0.154289] usbcore: registered new device driver usb
[    0.156391] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156425] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156620] media: Linux media interface: v0.10
[    0.156714] Linux video capture interface: v2.00
[    0.156831] pps_core: LinuxPPS API ver. 1 registered
[    0.156848] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157564] Advanced Linux Sound Architecture Driver Initialized.
[    0.158753] Switching to clocksource gp_timer
[    0.176788] NET: Registered protocol family 2
[    0.177779] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177869] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177958] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178050] TCP: reno registered
[    0.178076] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178122] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178619] NET: Registered protocol family 1
[    0.179205] RPC: Registered named UNIX socket transport module.
[    0.179226] RPC: Registered udp transport module.
[    0.179239] RPC: Registered tcp transport module.
[    0.179253] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179638] Trying to unpack rootfs image as initramfs...
[    1.965840] Freeing initrd memory: 12380K
[    1.966526] CPU PMU: probing PMU on CPU 0
[    1.966558] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.967091] omap2_mbox_probe: platform not supported
[    1.971008] VFS: Disk quotas dquot_6.5.2
[    1.971246] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.972649] NFS: Registering the id_resolver key type
[    1.972742] Key type id_resolver registered
[    1.972759] Key type id_legacy registered
[    1.972825] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.973264] msgmni has been set to 490
[    1.976134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.976161] io scheduler noop registered
[    1.976177] io scheduler deadline registered
[    1.976234] io scheduler cfq registered (default)
[    1.980293] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.982743] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.983027] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.643955] console [ttyO0] enabled
[    2.648501] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.657240] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.665882] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.674534] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.683500] [drm] Initialized drm 1.1.0 20060810
[    2.702145] brd: module loaded
[    2.712428] loop: module loaded
[    2.716606] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.726556] nand_get_flash_type: 2c,da against 2c,da
[    2.732082] ONFI param page 0 valid
[    2.735755] ONFI flash detected
[    2.739074] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.750984] omap2-nand: detected x8 NAND flash
[    2.755648] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.761229] omap2-nand: using custom ecc layout
[    2.766063] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.772458] Creating 10 MTD partitions on "omap2-nand.0":
[    2.778131] 0x000000000000-0x000000020000 : "spl"
[    2.784948] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.792412] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.799810] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.807162] 0x000000080000-0x000000240000 : "u-boot"
[    2.815428] 0x000000240000-0x000000260000 : "bootenv"
[    2.822366] 0x000000260000-0x000000280000 : "fdt"
[    2.828986] 0x000000280000-0x000000780000 : "kernel"
[    2.839970] 0x000000800000-0x000001c00000 : "root"
[    2.863444] 0x000001c00000-0x000003000000 : "config"
[    2.887220] OneNAND driver initializing
[    2.892916] usbcore: registered new interface driver asix
[    2.898733] usbcore: registered new interface driver cdc_ether
[    2.905004] usbcore: registered new interface driver smsc95xx
[    2.911112] usbcore: registered new interface driver net1080
[    2.917132] usbcore: registered new interface driver cdc_subset
[    2.923419] usbcore: registered new interface driver zaurus
[    2.929418] usbcore: registered new interface driver cdc_ncm
[    2.936141] usbcore: registered new interface driver cdc_acm
[    2.942101] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.950480] Initializing USB Mass Storage driver...
[    2.955744] usbcore: registered new interface driver usb-storage
[    2.962041] USB Mass Storage support registered.
[    2.967075] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.973783] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.979025] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.987790] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.987812] musb-hdrc: MHDRC RTL version 2.0
[    2.987827] musb-hdrc: setup fifo_mode 4
[    2.987855] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.988002] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.993045] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.999113] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    3.004383] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    3.013369] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.013391] musb-hdrc: MHDRC RTL version 2.0
[    3.013406] musb-hdrc: setup fifo_mode 4
[    3.013428] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.013579] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    3.018633] musb-hdrc musb-hdrc.1.auto: *** power=250
[    3.023944] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.030356] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.038600] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.038706] usb usb1: default language 0x0409
[    3.038764] usb usb1: udev 1, busnum 1, minor = 0
[    3.038787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.045916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.053487] usb usb1: Product: MUSB HDRC host driver
[    3.058701] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.064368] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.070331] usb usb1: usb_probe_device
[    3.070359] usb usb1: configuration #1 chosen from 1 choice
[    3.070426] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.070626] hub 1-0:1.0: usb_probe_interface
[    3.070649] hub 1-0:1.0: usb_probe_interface - got id
[    3.070676] hub 1-0:1.0: USB hub found
[    3.074730] hub 1-0:1.0: 1 port detected
[    3.078900] hub 1-0:1.0: standalone hub
[    3.078920] hub 1-0:1.0: individual port power switching
[    3.078938] hub 1-0:1.0: no over-current protection
[    3.078955] hub 1-0:1.0: Single TT
[    3.078976] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.078996] hub 1-0:1.0: power on to power good time: 10ms
[    3.079052] hub 1-0:1.0: local power source is good
[    3.079170] hub 1-0:1.0: enabling power on all ports
[    3.080208] mousedev: PS/2 mouse device common for all mice
[    3.088222] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.095729] 44e3e000.rtc: already running
[    3.100260] i2c /dev entries driver
[    3.105289] pps_ldisc: PPS line discipline registered
[    3.110763] Driver for 1-wire Dallas network protocol.
[    3.118033] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.125586] cpuidle: using governor ladder
[    3.129907] cpuidle: using governor menu
[    3.134482] of_get_named_gpio_flags exited with status 6
[    3.134501] of_get_named_gpio_flags: can't parse gpios property
[    3.134517] of_get_named_gpio_flags: can't parse gpios property
[    3.134553] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.141776] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.148578] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.155789] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.163107] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.170063] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.180482] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.204511] of_get_named_gpio_flags exited with status -517
[    3.204578] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.212232] ledtrig-cpu: registered to indicate activity on CPUs
[    3.219004] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.226196] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.234362] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.240660] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.247837] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.260106] usbcore: registered new interface driver usbhid
[    3.266025] usbhid: USB HID core driver
[    3.272923] TCP: cubic registered
[    3.276448] Initializing XFRM netlink socket
[    3.281026] NET: Registered protocol family 17
[    3.285888] NET: Registered protocol family 15
[    3.290768] Key type dns_resolver registered
[    3.295409] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.303519] ThumbEE CPU extension supported.
[    3.308033] Registering SWP/SWPB emulation handler
[    3.314036] registered taskstats version 1
[    3.320641] of_get_named_gpio_flags exited with status -517
[    3.320714] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.377659] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.384109] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.398620] libphy: 4a101000.mdio: probed
[    3.402941] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.413179] Detected MACID = 50:33:8b:0a:ca:6b
[    3.417865] cpsw 4a100000.ethernet: NAPI disabled
[    3.423251] of_get_named_gpio_flags exited with status -517
[    3.423315] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.432050] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.441335] cpu0 supply cpu0 not found, using dummy regulator
[    3.447844] cpufreq_cpu0: failed to scale voltage up: -22
[    3.453666] cpufreq_cpu0: failed to scale voltage up: -22
[    3.466426] ALSA device list:
[    3.469661]   No soundcards found.
[    3.474210] Freeing init memory: 264K
[    3.478262] Failed to execute /init
[    4.487100] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    6.256364] net eth0: initializing cpsw version 1.12 (0)
[    6.265339] net eth0: phy found : id is : 0x7c0f1
[    6.270819] libphy: PHY 4a101000.mdio:01 not found
[    6.276050] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.341007] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 23 21:46:41 (none) local0.err cgminer: Miner compile time: Fri Dec 22 16:38:56 CST 2017 type: Antminer D3 Blissz v2.04 beta
Dec 23 21:46:41 (none) local0.warn cgminer: Started cgminer 4.10.0
Dec 23 21:46:41 (none) local0.warn cgminer[362]: bitmain_DASH_init
Dec 23 21:46:41 (none) local0.warn cgminer[362]: check_fan_speed OK
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio51/value  chain 0
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio48/value  chain 1
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio47/value  chain 2
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detect total chain num 3
Dec 23 21:46:41 (none) local0.notice cgminer[362]: i2c init ok
Dec 23 21:46:41 (none) local0.notice cgminer[362]: check_whether_need_update_pic_program
Dec 23 21:46:43 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:44 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:45 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 23 21:46:46 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:47 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:48 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 23 21:46:49 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:50 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:51 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 23 21:46:51 (none) local0.notice cgminer[362]: every_chain_reset_PIC16F1704_pic_new
Dec 23 21:46:52 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:54 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:56 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:56 (none) local0.notice cgminer[362]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 23 21:46:57 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:57 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:58 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:58 (none) local0.notice cgminer[362]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 23 21:46:58 (none) local0.notice cgminer[362]: pic_heart_beat_func_new
Dec 23 21:46:58 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 23 21:46:58 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: reset_all_hash_board
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain chainid = 0
Dec 23 21:46:59 (none) local0.err cgminer[362]: create rx read thread for chain 0 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[0]
Dec 23 21:46:59 (none) local0.err cgminer[362]: create tx read thread for chain 0 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain chainid = 1
Dec 23 21:46:59 (none) local0.err cgminer[362]: create rx read thread for chain 1 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[1]
Dec 23 21:46:59 (none) local0.err cgminer[362]: create tx read thread for chain 1 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain chainid = 2
Dec 23 21:46:59 (none) local0.err cgminer[362]: create rx read thread for chain 2 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[2]
Dec 23 21:46:59 (none) local0.err cgminer[362]: create tx read thread for chain 2 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: check_every_chain_asic_number
Dec 23 21:46:59 (none) local0.warn cgminer[362]: check_asic_reg: Chain0 has 60 ASICs
Dec 23 21:47:00 (none) local0.warn cgminer[362]: check_asic_reg: Chain1 has 60 ASICs
Dec 23 21:47:00 (none) local0.warn cgminer[362]: check_asic_reg: Chain2 has 60 ASICs
Dec 23 21:47:00 (none) local0.notice cgminer[362]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 23 21:47:00 (none) local0.notice cgminer[362]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_ticket_mask ticket_mask = 0x0000001b
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 0
Dec 23 21:47:00 (none) local0.notice cgminer[362]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 23 21:47:00 (none) local0.notice cgminer[362]: Now Set
  • Chain Address
Dec 23 21:47:01 (none) local0.notice cgminer[362]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 23 21:47:01 (none) local0.notice cgminer[362]: Now Set [1] Chain Address
Dec 23 21:47:02 (none) local0.notice cgminer[362]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Dec 23 21:47:02 (none) local0.notice cgminer[362]: Now Set [2] Chain Address
Dec 23 21:47:03 (none) local0.notice cgminer[362]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: 0 calibration_sensor_offset_chain
Dec 23 21:47:03 (none) local0.notice cgminer[362]: chain:0 local:43 remote:46
Dec 23 21:47:03 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 23 21:47:03 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 23 21:47:04 (none) local0.notice cgminer[362]: chain:0 local:43 remote:43
Dec 23 21:47:04 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 23 21:47:04 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 23 21:47:04 (none) local0.notice cgminer[362]: 1 calibration_sensor_offset_chain
Dec 23 21:47:05 (none) local0.notice cgminer[362]: chain:1 local:40 remote:43
Dec 23 21:47:05 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 23 21:47:05 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 23 21:47:05 (none) local0.notice cgminer[362]: chain:1 local:40 remote:40
Dec 23 21:47:05 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 23 21:47:06 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 23 21:47:06 (none) local0.notice cgminer[362]: 2 calibration_sensor_offset_chain
Dec 23 21:47:06 (none) local0.notice cgminer[362]: chain:2 local:45 remote:47
Dec 23 21:47:06 (none) local0.warn cgminer[362]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 23 21:47:06 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -2,
Dec 23 21:47:06 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain
Dec 23 21:47:06 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 23 21:47:07 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 23 21:47:07 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 2 set_temperature_offset_value_chain
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 23 21:47:07 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -2,
Dec 23 21:47:07 (none) local0.notice cgminer[362]: frequency = '1'
Dec 23 21:47:07 (none) local0.notice cgminer[362]: dev.timeout = 301989852 us
Dec 23 21:47:07 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:08 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:08 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:08 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:09 (none) local0.err cgminer[362]: low hashrate detection trigger: 31.464000 Gh/s
Dec 23 21:47:09 (none) local0.notice cgminer[362]: set voltage = 1143.942031  real:255 mv
Dec 23 21:47:10 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 23 21:47:10 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 23 21:47:10 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 23 21:47:11 (none) local0.err cgminer[362]: cgminer time error total_secs = 1514065631.044161 last_total_secs = 1.000000
Dec 23 21:47:11 (none) local0.warn cgminer[362]: Pool 0 stratum+tcp://x11.eu.nicehash.com:3336 alive, testing stability
Dec 23 21:47:11 (none) local0.warn cgminer[362]: Switching to pool 0 stratum+tcp://x11.eu.nicehash.com:3336
Dec 23 21:47:17 (none) local0.warn cgminer[362]: API running in IP access mode on port 4028 (15)
Dec 23 21:47:26 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 353.
Dec 23 21:47:27 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 353.
Dec 23 21:47:27 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 353.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 353 too high. Count = 1.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 356.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 356.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 356.
Dec 23 21:48:15 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 359.
Dec 23 21:48:15 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 359.
Dec 23 21:48:15 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 359.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 359 too high. Count = 1.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 362.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 362.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 362.
Dec 23 21:49:04 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 366.
Dec 23 21:49:04 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 366.
Dec 23 21:49:04 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 366.
Dec 23 21:49:28 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 366 too high. Count = 1.
Dec 23 21:49:28 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 369.
Dec 23 21:49:29 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 369.
Dec 23 21:49:29 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 369.
Dec 23 21:49:41 (none) local0.warn cgminer[362]: Pool 0 stratum share submission failure
Dec 23 21:49:46 (none) local0.warn cgminer[362]: Pool 0 communication resumed, submitting work
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 369 too high. Count = 1.
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 375.
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 375.
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 375.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 375 too high. Count = 2.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 378.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 378.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 378.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 378 too high. Count = 1.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 378 too high. Count = 3.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 381.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE chain 1 final frequency: 350.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 381.
Dec 23 21:51:06 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 384.
Dec 23 21:51:06 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 384.
Dec 23 21:51:30 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 384 too high. Count = 1.
Dec 23 21:51:30 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 387.
Dec 23 21:51:30 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 387.
Dec 23 21:51:42 (none) local0.warn cgminer[362]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9991
Dec 23 21:51:55 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 391.
Dec 23 21:51:55 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 391.
Dec 23 21:52:19 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 391 too high. Count = 1.
Dec 23 21:52:19 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 394.
Dec 23 21:52:19 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 394.
Dec 23 21:52:43 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 397.
Dec 23 21:52:43 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 397.
Dec 23 21:53:07 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 397 too high. Count = 1.
Dec 23 21:53:07 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 400.
Dec 23 21:53:07 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 400.
Dec 23 21:53:32 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 400 too high. Count = 2.
Dec 23 21:53:32 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 406.
Dec 23 21:53:32 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 406.
Dec 23 21:53:32 (none) local0.warn cgminer[362]: Switching to pool 0 stratum+tcp://x11.eu.nicehash.com:3336
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 406 too high. Count = 3.
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE chain 2, Frequency 406 too high. Count = 1.
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE chain 0 final frequency: 369.
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 412.
Dec 23 21:54:20 (none) local0.notice cgminer[362]: AUTOTUNE chain 2, Frequency 412 too high. Count = 2.
Dec 23 21:54:20 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 419.
Dec 23 21:54:44 (none) local0.notice cgminer[362]: AUTOTUNE chain 2, Frequency 419 too high. Count = 3.
Dec 23 21:54:44 (none) local0.notice cgminer[362]: AUTOTUNE chain 2 final frequency: 387.
Dec 23 21:55:40 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 384.
Dec 23 21:56:09 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 381.
Dec 23 21:56:38 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 362.
Dec 23 21:57:07 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 356.
Dec 23 21:57:07 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 378.
Dec 23 21:57:36 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 353.
Dec 23 21:57:48 (none) local0.err cgminer[362]: low hashrate detection trigger: 11337.528000 Gh/s
Dec 23 21:59:01 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 350.
Dec 23 21:59:14 (none) local0.err cgminer[362]: low hashrate detection trigger: 11306.064000 Gh/s
Dec 23 21:59:31 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 300.
Dec 23 22:00:00 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:00:12 (none) local0.err cgminer[362]: low hashrate detection trigger: 9732.864000 Gh/s
Dec 23 22:00:39 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 1. New frequency: 300.
Dec 23 22:01:08 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:01:08 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 1. New frequency: 200.
Dec 23 22:02:25 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 375.
Dec 23 22:03:21 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [8128.200000], real: [7907.600466]
Dec 23 22:03:28 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:04:26 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:05:23 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [8128.200000], real: [7668.611674]
Dec 23 22:05:23 (none) local0.warn cgminer[362]: Too many ASIC's failed: [36]
Dec 23 22:07:24 (none) local0.warn cgminer[362]: Too many ASIC's failed: [38]
Dec 23 22:08:17 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 369.
Dec 23 22:08:29 (none) local0.err cgminer[362]: low hashrate detection trigger: 8065.272000 Gh/s
Dec 23 22:09:26 (none) local0.warn cgminer[362]: Too many ASIC's failed: [25]
Dec 23 22:13:29 (none) local0.warn cgminer[362]: Too many ASIC's failed: [24]
Dec 23 22:15:31 (none) local0.warn cgminer[362]: Too many ASIC's failed: [30]
Dec 23 22:19:35 (none) local0.warn cgminer[362]: Too many ASIC's failed: [35]
Dec 23 22:21:37 (none) local0.warn cgminer[362]: Too many ASIC's failed: [43]
Dec 23 22:23:09 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:23:21 (none) local0.err cgminer[362]: low hashrate detection trigger: 8065.272000 Gh/s
Dec 23 22:23:38 (none) local0.warn cgminer[362]: Too many ASIC's failed: [36]
Dec 23 22:25:39 (none) local0.warn cgminer[362]: Too many ASIC's failed: [40]
Dec 23 22:27:40 (none) local0.warn cgminer[362]: Too many ASIC's failed: [20]
Dec 23 22:29:42 (none) local0.warn cgminer[362]: Too many ASIC's failed: [40]
Dec 23 22:29:42 (none) local0.err cgminer[362]: Too many ASIC's failed, doing nothing as automatic reboot option is disabled
Dec 23 22:31:43 (none) local0.warn cgminer[362]: Too many ASIC's failed: [24]
Dec 23 22:33:45 (none) local0.warn cgminer[362]: Too many ASIC's failed: [34]
Dec 23 22:35:47 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [8065.272000], real: [8063.220221]
Dec 23 22:35:47 (none) local0.warn cgminer[362]: Too many ASIC's failed: [45]
Dec 23 22:37:49 (none) local0.warn cgminer[362]: Too many ASIC's failed: [30]
Dec 23 22:37:49 (none) local0.err cgminer[362]: Too many ASIC's failed, doing nothing as automatic reboot option is disabled
Dec 23 22:39:51 (none) local0.warn cgminer[362]: Too many ASIC's failed: [35]
Dec 23 22:41:52 (none) local0.warn cgminer[362]: Too many ASIC's failed: [33]
Dec 23 22:43:54 (none) local0.warn cgminer[362]: Too many ASIC's failed: [48]
Dec 23 22:45:56 (none) local0.warn cgminer[362]: Too many ASIC's failed: [39]
Dec 23 22:45:56 (none) local0.err cgminer[362]: Too many ASIC's failed, doing nothing as automatic reboot option is disabled
Dec 23 22:47:58 (none) local0.warn cgminer[362]: Too many ASIC's failed: [52]
Dec 23 22:49:36 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:49:48 (none) local0.err cgminer[362]: low hashrate detection trigger: 8065.272000 Gh/s
Dec 23 22:50:00 (none) local0.warn cgminer[362]: Too many ASIC's failed: [21]
Dec 23 22:52:01 (none) local0.warn cgminer[362]: Too many ASIC's failed: [24]
Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!