Antminer D3 Blissz firmware (10/12 v1.12 update)

[vege23]

Hello

Unfortunately, my miner today has a lot of hw erros and the 3 chain shows only more 54/60 chips

Request for help I already have one
Perform reset and firmware update unfortunately made no success.

Thank you

Kind regards

Stefan

Happy Christmas and a happy new year.

[funminer]

Hello

Unfortunately, my miner today has a lot of hw erros and the 3 chain shows only more 54/60 chips

Request for help I already have one
Perform reset and firmware update unfortunately made no success.

Thank you

Kind regards

Stefan

Happy Christmas and a happy new year.

Try a reboot
Lower the frequency on the hashboard that miss the 6 ASIC´s
or give more voltage to this board

[Stargirlinsapporo]

Hello everyone
I am very new to mining, like very new and have some questions
So, I tried to ask in another thread and was adviced to ask here

I am looking for a way to overclock 19.3 Gh/s batch D3
Temperature so far is not a problem for me as I could find the best possible environment temperature (about +1 to +3C), so fans are running between 2900-3100 (#1) and 3800-4000 (#2) rpm, Temp(PCB) 43-45C, Temp(Chip) 61-63C (How it happened I described in
https://bitcointalk.org/index.php?topic=2205172.msg26834405#msg26834405)

Now I wonder how to overclock D3? And what is the possible Max frequency?
Is there any other limitations to overclock  D3 except for temperature?

[cumbrian-miner]

Hello again guys, With the new beta update, im having a trouble, I was tweaking a few settings, and then I could not see the status page correctly anymore, there is no information at all as u can see on my screenshot. The miner is working and I can see hashrate on the pool tho, strange, any help on that ? or is just because of the beta branch ?
https://image.ibb.co/jKOk4m/haaalp.jpg

How long did you wait for the machine to start up before checking or refreshing the status?

Waited enough Sir, don't worry also tried Rebooting machine didn't work but going back to the Stable Version worked and my status page is back so I guess its clearly a problem with the new version !

Happens on mine also. No need to reboot. Just refresh screen - might need to do it a couple of times. Or go back to config and then back to status. But yes - it can be sketchy!

[blissz]

v2.04 beta :: 22/12 :: test version

Download:
https://mega.nz/#!ulYlTB4D!nEymzPvujO17EXa95q9_oRHAQOxZUZvxu_bulZ8_wUA

Changes 22/12:
- reboots the D3 on high temperatures (> 85 deg PCB temp). This feature will save your unit in case your fans will fail.
- improved auto tune algorithm stability
- Increased the chip starting frequency of the autotune algorithm for higher voltages.

Changes 14/12:
- fixed auto recover from xxxx
- cleaned up kernel logging
- a bit more aggressive tuning
- tunes down faster now when too many HW errors are detected


Changes 13/12:
- Totally rewritten code base, based from latest available bitmain / cgminer sources
- ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed)
- blazing fast mining status overview in the webinterface
- as requested: the dev mining starts later now (after 5 minutes)
- as requested: dev pools status is now visible in the miner status


Important: The autotune feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do:

set your advanced settings the same as displayed bellow
let it run for at least 20 minutes
PM your (complete) kernel log
By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be.
In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information

Thank you!

[marcio5a]

I am confused.

Soft 12/10.
Voltage - lowest
Freq - 400mh
APW3++
Power consumption at the wall - 1600W   why   how  

https://imgur.com/a/i151G
https://imgur.com/a/hKrka

[blissz]

I am confused.

Soft 12/10.
Voltage - lowest
Freq - 400mh
APW3++
Power consumption at the wall - 1600W   why   how  

Your meter is incorrect / defect. Looking at your temps and fan speeds the power from the wall is roughly 700 - 750 watt I would say.
For the idea: At 1600 watt / 100% fan speed you will see 80 - 85 degree chip temps at least. At your fan speed you will see and smell smoke at 1600 watts

[zerp86]

hi blissz..

my chip become not enough chip for chain 2 and 3.. after a few reboot or reset.. chain 3 disappear but hashrate still can be read..
chain 1 have no problem with 60asis chip
chain 2 and 3 only have 54chip and a lot of hw error..

i flash with recommend version.. only 1 d3 become like this.. the other is good run
 

[vege23]

hi blissz..

my chip become not enough chip for chain 2 and 3.. after a few reboot or reset.. chain 3 disappear but hashrate still can be read..
chain 1 have no problem with 60asis chip
chain 2 and 3 only have 54chip and a lot of hw error..

i flash with recommend version.. only 1 d3 become like this.. the other is good run

I have the self problem with chain 3 54/60 asic

[isukabtc]

Review :

*Before update to blissz it run excatly 19.3 ghs for 1 hour average with 0.0026% of error

*After update to blissz
First I use all default. The chip automaticly run with 537 mhz, 13v of voltage and temp 75c-84c which is not really good but acceptable resulting the miner runs with 20.05 ghs for 1 hour average. I got 1.78% error and 1.5% firmware fee so 20.05 ghs - 3.28% = 19.39 ghs which is not good but not bad either.

If you think Im done with this.. Well no, I push it further lol

*I push again to 550 mhz, 15v and temp 84 75 84 and the result is good. It run 20.55 ghs without error (0%), with fee 1.5% I got 20.24 ghs which is not good, its FANTASTIC !!!

Dunno If I can push it again but 84C is already -1c from temperature safety. Any suggestion ?

[lashatatu]

Review :

*Before update to blissz it run excatly 19.3 ghs for 1 hour average with 0.0026% of error

*After update to blissz
First I use all default. The chip automaticly run with 537 mhz, 13v of voltage and temp 75c-84c which is not really good but acceptable resulting the miner runs with 20.05 ghs for 1 hour average. I got 1.78% error and 1.5% firmware fee so 20.05 ghs - 3.28% = 19.39 ghs which is not good but not bad either.

If you think Im done with this.. Well no, I push it further lol

*I push again to 550 mhz, 15v and temp 84 75 84 and the result is good. It run 20.55 ghs without error (0%), with fee 1.5% I got 20.24 ghs which is not good, its FANTASTIC !!!

Dunno If I can push it again but 84C is already -1c from temperature safety. Any suggestion ?

so you basically increased performance and had no errors and with lower performance you had errors? am i correct?

just asking because i cant really get no errors or even few errors on one board, i get like 2-3% error and it's only on one board others are good

[isukabtc]

Review :

*Before update to blissz it run excatly 19.3 ghs for 1 hour average with 0.0026% of error

*After update to blissz
First I use all default. The chip automaticly run with 537 mhz, 13v of voltage and temp 75c-84c which is not really good but acceptable resulting the miner runs with 20.05 ghs for 1 hour average. I got 1.78% error and 1.5% firmware fee so 20.05 ghs - 3.28% = 19.39 ghs which is not good but not bad either.

If you think Im done with this.. Well no, I push it further lol

*I push again to 550 mhz, 15v and temp 84 75 84 and the result is good. It run 20.55 ghs without error (0%), with fee 1.5% I got 20.24 ghs which is not good, its FANTASTIC !!!

Dunno If I can push it again but 84C is already -1c from temperature safety. Any suggestion ?

so you basically increased performance and had no errors and with lower performance you had errors? am i correct?

just asking because i cant really get no errors or even few errors on one board, i get like 2-3% error and it's only on one board others are good

https://s31.postimg.org/hp6g873pl/IMG_20171224_033640.jpg

Weird but yes. Almost everytime I restart the miner, it ahows different result and this is the best (dunno if I restart it again). After almost 5 hours mining, avg speed is 20.6 ghs with 0.0013% error, I dont know this is much or not.

[mikespax]

Am I wasting my time tweaking my frequencies to get zero hardware errors?

[lashatatu]

Review :

*Before update to blissz it run excatly 19.3 ghs for 1 hour average with 0.0026% of error

*After update to blissz
First I use all default. The chip automaticly run with 537 mhz, 13v of voltage and temp 75c-84c which is not really good but acceptable resulting the miner runs with 20.05 ghs for 1 hour average. I got 1.78% error and 1.5% firmware fee so 20.05 ghs - 3.28% = 19.39 ghs which is not good but not bad either.

If you think Im done with this.. Well no, I push it further lol

*I push again to 550 mhz, 15v and temp 84 75 84 and the result is good. It run 20.55 ghs without error (0%), with fee 1.5% I got 20.24 ghs which is not good, its FANTASTIC !!!

Dunno If I can push it again but 84C is already -1c from temperature safety. Any suggestion ?

so you basically increased performance and had no errors and with lower performance you had errors? am i correct?

just asking because i cant really get no errors or even few errors on one board, i get like 2-3% error and it's only on one board others are good

Weird but yes. Almost everytime I restart the miner, it ahows different result and this is the best (dunno if I restart it again). After almost 5 hours mining, avg speed is 20.6 ghs with 0.0013% error, I dont know this is much or not.

usually i have 2-3% errors, % of amount of errors you have is nothing

[blissz]

Am I wasting my time tweaking my frequencies to get zero hardware errors?

Yes, you do. Accept some HW as it's not any problem at all to have some. My personal preference is to have roughly 10 every hour (per board) as that means you're on the limit which is good.

[koenkerst]

Blissz
Here is my logfile.
Hope you can use it

v2.04 beta :: 22/12 :: test version

Download:
https://mega.nz/#!ulYlTB4D!nEymzPvujO17EXa95q9_oRHAQOxZUZvxu_bulZ8_wUA

Changes 22/12:
- reboots the D3 on high temperatures (> 85 deg PCB temp). This feature will save your unit in case your fans will fail.
- improved auto tune algorithm stability
- Increased the chip starting frequency of the autotune algorithm for higher voltages.

Changes 14/12:
- fixed auto recover from xxxx
- cleaned up kernel logging
- a bit more aggressive tuning
- tunes down faster now when too many HW errors are detected


Changes 13/12:
- Totally rewritten code base, based from latest available bitmain / cgminer sources
- ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed)
- blazing fast mining status overview in the webinterface
- as requested: the dev mining starts later now (after 5 minutes)
- as requested: dev pools status is now visible in the miner status


Important: The autotune feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do:

set your advanced settings the same as displayed bellow
let it run for at least 20 minutes
PM your (complete) kernel log
By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be.
In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information

Thank you!

https://img15.hostingpics.net/pics/453940Untitled.jpg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238536k/238536k available, 23608k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015438] pid_max: default: 32768 minimum: 301
[    0.015667] Security Framework initialized
[    0.015763] Mount-cache hash table entries: 512
[    0.024598] Initializing cgroup subsys cpuacct
[    0.024630] Initializing cgroup subsys memory
[    0.024693] Initializing cgroup subsys blkio
[    0.024830] CPU: Testing write buffer coherency: ok
[    0.025397] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025474] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026800] Brought up 1 CPUs
[    0.026823] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028127] devtmpfs: initialized
[    0.092513] pinctrl core: initialized pinctrl subsystem
[    0.092731] rstctl core: initialized rstctl subsystem
[    0.093226] regulator-dummy: no parameters
[    0.093803] NET: Registered protocol family 16
[    0.094507] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104173] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104355] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105442] platform 49000000.edma: alias fck already exists
[    0.105475] platform 49000000.edma: alias fck already exists
[    0.105503] platform 49000000.edma: alias fck already exists
[    0.106648] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106830] OMAP GPIO hardware version 0.1
[    0.108231] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109553] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110866] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111497] of_get_named_gpio_flags exited with status 52
[    0.111530] gpio-rctrl rstctl.3: loaded OK
[    0.116631] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119837] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122022] cpsw.0: No hwaddr in dt. Using 50:33:8b:0a:ca:6b from efuse
[    0.122054] cpsw.1: No hwaddr in dt. Using 50:33:8b:0a:ca:6d from efuse
[    0.137616] bio: create slab <bio-0> at 0
[    0.149740] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149983] of_get_named_gpio_flags: can't parse gpios property
[    0.150271] vmmcsd_fixed: 3300 mV
[    0.153390] SCSI subsystem initialized
[    0.153838] usbcore: registered new interface driver usbfs
[    0.153952] usbcore: registered new interface driver hub
[    0.154289] usbcore: registered new device driver usb
[    0.156391] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156425] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156620] media: Linux media interface: v0.10
[    0.156714] Linux video capture interface: v2.00
[    0.156831] pps_core: LinuxPPS API ver. 1 registered
[    0.156848] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157564] Advanced Linux Sound Architecture Driver Initialized.
[    0.158753] Switching to clocksource gp_timer
[    0.176788] NET: Registered protocol family 2
[    0.177779] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177869] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177958] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178050] TCP: reno registered
[    0.178076] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178122] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178619] NET: Registered protocol family 1
[    0.179205] RPC: Registered named UNIX socket transport module.
[    0.179226] RPC: Registered udp transport module.
[    0.179239] RPC: Registered tcp transport module.
[    0.179253] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179638] Trying to unpack rootfs image as initramfs...
[    1.965840] Freeing initrd memory: 12380K
[    1.966526] CPU PMU: probing PMU on CPU 0
[    1.966558] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.967091] omap2_mbox_probe: platform not supported
[    1.971008] VFS: Disk quotas dquot_6.5.2
[    1.971246] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.972649] NFS: Registering the id_resolver key type
[    1.972742] Key type id_resolver registered
[    1.972759] Key type id_legacy registered
[    1.972825] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.973264] msgmni has been set to 490
[    1.976134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.976161] io scheduler noop registered
[    1.976177] io scheduler deadline registered
[    1.976234] io scheduler cfq registered (default)
[    1.980293] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.982743] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.983027] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.643955] console [ttyO0] enabled
[    2.648501] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.657240] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.665882] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.674534] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.683500] [drm] Initialized drm 1.1.0 20060810
[    2.702145] brd: module loaded
[    2.712428] loop: module loaded
[    2.716606] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.726556] nand_get_flash_type: 2c,da against 2c,da
[    2.732082] ONFI param page 0 valid
[    2.735755] ONFI flash detected
[    2.739074] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.750984] omap2-nand: detected x8 NAND flash
[    2.755648] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.761229] omap2-nand: using custom ecc layout
[    2.766063] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.772458] Creating 10 MTD partitions on "omap2-nand.0":
[    2.778131] 0x000000000000-0x000000020000 : "spl"
[    2.784948] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.792412] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.799810] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.807162] 0x000000080000-0x000000240000 : "u-boot"
[    2.815428] 0x000000240000-0x000000260000 : "bootenv"
[    2.822366] 0x000000260000-0x000000280000 : "fdt"
[    2.828986] 0x000000280000-0x000000780000 : "kernel"
[    2.839970] 0x000000800000-0x000001c00000 : "root"
[    2.863444] 0x000001c00000-0x000003000000 : "config"
[    2.887220] OneNAND driver initializing
[    2.892916] usbcore: registered new interface driver asix
[    2.898733] usbcore: registered new interface driver cdc_ether
[    2.905004] usbcore: registered new interface driver smsc95xx
[    2.911112] usbcore: registered new interface driver net1080
[    2.917132] usbcore: registered new interface driver cdc_subset
[    2.923419] usbcore: registered new interface driver zaurus
[    2.929418] usbcore: registered new interface driver cdc_ncm
[    2.936141] usbcore: registered new interface driver cdc_acm
[    2.942101] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.950480] Initializing USB Mass Storage driver...
[    2.955744] usbcore: registered new interface driver usb-storage
[    2.962041] USB Mass Storage support registered.
[    2.967075] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.973783] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.979025] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.987790] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.987812] musb-hdrc: MHDRC RTL version 2.0
[    2.987827] musb-hdrc: setup fifo_mode 4
[    2.987855] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.988002] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.993045] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.999113] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    3.004383] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    3.013369] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    3.013391] musb-hdrc: MHDRC RTL version 2.0
[    3.013406] musb-hdrc: setup fifo_mode 4
[    3.013428] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    3.013579] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    3.018633] musb-hdrc musb-hdrc.1.auto: *** power=250
[    3.023944] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.030356] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.038600] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.038706] usb usb1: default language 0x0409
[    3.038764] usb usb1: udev 1, busnum 1, minor = 0
[    3.038787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.045916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.053487] usb usb1: Product: MUSB HDRC host driver
[    3.058701] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.064368] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.070331] usb usb1: usb_probe_device
[    3.070359] usb usb1: configuration #1 chosen from 1 choice
[    3.070426] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.070626] hub 1-0:1.0: usb_probe_interface
[    3.070649] hub 1-0:1.0: usb_probe_interface - got id
[    3.070676] hub 1-0:1.0: USB hub found
[    3.074730] hub 1-0:1.0: 1 port detected
[    3.078900] hub 1-0:1.0: standalone hub
[    3.078920] hub 1-0:1.0: individual port power switching
[    3.078938] hub 1-0:1.0: no over-current protection
[    3.078955] hub 1-0:1.0: Single TT
[    3.078976] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.078996] hub 1-0:1.0: power on to power good time: 10ms
[    3.079052] hub 1-0:1.0: local power source is good
[    3.079170] hub 1-0:1.0: enabling power on all ports
[    3.080208] mousedev: PS/2 mouse device common for all mice
[    3.088222] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.095729] 44e3e000.rtc: already running
[    3.100260] i2c /dev entries driver
[    3.105289] pps_ldisc: PPS line discipline registered
[    3.110763] Driver for 1-wire Dallas network protocol.
[    3.118033] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.125586] cpuidle: using governor ladder
[    3.129907] cpuidle: using governor menu
[    3.134482] of_get_named_gpio_flags exited with status 6
[    3.134501] of_get_named_gpio_flags: can't parse gpios property
[    3.134517] of_get_named_gpio_flags: can't parse gpios property
[    3.134553] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.141776] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.148578] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.155789] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.163107] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.170063] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.180482] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.204511] of_get_named_gpio_flags exited with status -517
[    3.204578] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.212232] ledtrig-cpu: registered to indicate activity on CPUs
[    3.219004] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.226196] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.234362] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.240660] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.247837] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.260106] usbcore: registered new interface driver usbhid
[    3.266025] usbhid: USB HID core driver
[    3.272923] TCP: cubic registered
[    3.276448] Initializing XFRM netlink socket
[    3.281026] NET: Registered protocol family 17
[    3.285888] NET: Registered protocol family 15
[    3.290768] Key type dns_resolver registered
[    3.295409] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.303519] ThumbEE CPU extension supported.
[    3.308033] Registering SWP/SWPB emulation handler
[    3.314036] registered taskstats version 1
[    3.320641] of_get_named_gpio_flags exited with status -517
[    3.320714] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.377659] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.384109] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.398620] libphy: 4a101000.mdio: probed
[    3.402941] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.413179] Detected MACID = 50:33:8b:0a:ca:6b
[    3.417865] cpsw 4a100000.ethernet: NAPI disabled
[    3.423251] of_get_named_gpio_flags exited with status -517
[    3.423315] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.432050] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.441335] cpu0 supply cpu0 not found, using dummy regulator
[    3.447844] cpufreq_cpu0: failed to scale voltage up: -22
[    3.453666] cpufreq_cpu0: failed to scale voltage up: -22
[    3.466426] ALSA device list:
[    3.469661]   No soundcards found.
[    3.474210] Freeing init memory: 264K
[    3.478262] Failed to execute /init
[    4.487100] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    6.256364] net eth0: initializing cpsw version 1.12 (0)
[    6.265339] net eth0: phy found : id is : 0x7c0f1
[    6.270819] libphy: PHY 4a101000.mdio:01 not found
[    6.276050] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.341007] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 23 21:46:41 (none) local0.err cgminer: Miner compile time: Fri Dec 22 16:38:56 CST 2017 type: Antminer D3 Blissz v2.04 beta
Dec 23 21:46:41 (none) local0.warn cgminer: Started cgminer 4.10.0
Dec 23 21:46:41 (none) local0.warn cgminer[362]: bitmain_DASH_init
Dec 23 21:46:41 (none) local0.warn cgminer[362]: check_fan_speed OK
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio51/value  chain 0
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio48/value  chain 1
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detected at /sys/class/gpio/gpio47/value  chain 2
Dec 23 21:46:41 (none) local0.notice cgminer[362]: detect total chain num 3
Dec 23 21:46:41 (none) local0.notice cgminer[362]: i2c init ok
Dec 23 21:46:41 (none) local0.notice cgminer[362]: check_whether_need_update_pic_program
Dec 23 21:46:43 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:44 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:45 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 23 21:46:46 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:47 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:48 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 23 21:46:49 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:50 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:51 (none) local0.notice cgminer[362]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 23 21:46:51 (none) local0.notice cgminer[362]: every_chain_reset_PIC16F1704_pic_new
Dec 23 21:46:52 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:54 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:56 (none) local0.notice cgminer[362]: reset_PIC16F1704_pic_new ok
Dec 23 21:46:56 (none) local0.notice cgminer[362]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 23 21:46:57 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:57 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:58 (none) local0.notice cgminer[362]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 23 21:46:58 (none) local0.notice cgminer[362]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 23 21:46:58 (none) local0.notice cgminer[362]: pic_heart_beat_func_new
Dec 23 21:46:58 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 23 21:46:58 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: enable_PIC16F1704_dc_dc_new ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: reset_all_hash_board
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain chainid = 0
Dec 23 21:46:59 (none) local0.err cgminer[362]: create rx read thread for chain 0 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[0]
Dec 23 21:46:59 (none) local0.err cgminer[362]: create tx read thread for chain 0 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain chainid = 1
Dec 23 21:46:59 (none) local0.err cgminer[362]: create rx read thread for chain 1 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[1]
Dec 23 21:46:59 (none) local0.err cgminer[362]: create tx read thread for chain 1 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain chainid = 2
Dec 23 21:46:59 (none) local0.err cgminer[362]: create rx read thread for chain 2 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: Start A New Asic Response.Chain Id:[2]
Dec 23 21:46:59 (none) local0.err cgminer[362]: create tx read thread for chain 2 ok
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: tty_init_chain
Dec 23 21:46:59 (none) local0.notice cgminer[362]: open device over
Dec 23 21:46:59 (none) local0.notice cgminer[362]: check_every_chain_asic_number
Dec 23 21:46:59 (none) local0.warn cgminer[362]: check_asic_reg: Chain0 has 60 ASICs
Dec 23 21:47:00 (none) local0.warn cgminer[362]: check_asic_reg: Chain1 has 60 ASICs
Dec 23 21:47:00 (none) local0.warn cgminer[362]: check_asic_reg: Chain2 has 60 ASICs
Dec 23 21:47:00 (none) local0.notice cgminer[362]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 23 21:47:00 (none) local0.notice cgminer[362]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_ticket_mask ticket_mask = 0x0000001b
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 1
Dec 23 21:47:00 (none) local0.warn cgminer[362]: error freq,set default freq(200M) instead
Dec 23 21:47:00 (none) local0.notice cgminer[362]: set_frequency_chain: frequency = 0
Dec 23 21:47:00 (none) local0.notice cgminer[362]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 23 21:47:00 (none) local0.notice cgminer[362]: Now Set

• Chain Address

Dec 23 21:47:01 (none) local0.notice cgminer[362]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 23 21:47:01 (none) local0.notice cgminer[362]: Now Set [1] Chain Address
Dec 23 21:47:02 (none) local0.notice cgminer[362]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Dec 23 21:47:02 (none) local0.notice cgminer[362]: Now Set [2] Chain Address
Dec 23 21:47:03 (none) local0.notice cgminer[362]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 23 21:47:03 (none) local0.notice cgminer[362]: 0 calibration_sensor_offset_chain
Dec 23 21:47:03 (none) local0.notice cgminer[362]: chain:0 local:43 remote:46
Dec 23 21:47:03 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 23 21:47:03 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 23 21:47:04 (none) local0.notice cgminer[362]: chain:0 local:43 remote:43
Dec 23 21:47:04 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 23 21:47:04 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 23 21:47:04 (none) local0.notice cgminer[362]: 1 calibration_sensor_offset_chain
Dec 23 21:47:05 (none) local0.notice cgminer[362]: chain:1 local:40 remote:43
Dec 23 21:47:05 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 23 21:47:05 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 23 21:47:05 (none) local0.notice cgminer[362]: chain:1 local:40 remote:40
Dec 23 21:47:05 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 23 21:47:06 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 23 21:47:06 (none) local0.notice cgminer[362]: 2 calibration_sensor_offset_chain
Dec 23 21:47:06 (none) local0.notice cgminer[362]: chain:2 local:45 remote:47
Dec 23 21:47:06 (none) local0.warn cgminer[362]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 23 21:47:06 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -2,
Dec 23 21:47:06 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain
Dec 23 21:47:06 (none) local0.warn cgminer[362]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 23 21:47:07 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 23 21:47:07 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 2 set_temperature_offset_value_chain
Dec 23 21:47:07 (none) local0.warn cgminer[362]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 23 21:47:07 (none) local0.notice cgminer[362]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -2,
Dec 23 21:47:07 (none) local0.notice cgminer[362]: frequency = '1'
Dec 23 21:47:07 (none) local0.notice cgminer[362]: dev.timeout = 301989852 us
Dec 23 21:47:07 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:08 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:08 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:08 (none) local0.notice cgminer[362]: open_core_chain
Dec 23 21:47:09 (none) local0.err cgminer[362]: low hashrate detection trigger: 31.464000 Gh/s
Dec 23 21:47:09 (none) local0.notice cgminer[362]: set voltage = 1143.942031  real:255 mv
Dec 23 21:47:10 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 23 21:47:10 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 23 21:47:10 (none) local0.notice cgminer[362]: set_PIC16F1704_voltage_new ok, voltage = 0xff
Dec 23 21:47:11 (none) local0.err cgminer[362]: cgminer time error total_secs = 1514065631.044161 last_total_secs = 1.000000
Dec 23 21:47:11 (none) local0.warn cgminer[362]: Pool 0 stratum+tcp://x11.eu.nicehash.com:3336 alive, testing stability
Dec 23 21:47:11 (none) local0.warn cgminer[362]: Switching to pool 0 stratum+tcp://x11.eu.nicehash.com:3336
Dec 23 21:47:17 (none) local0.warn cgminer[362]: API running in IP access mode on port 4028 (15)
Dec 23 21:47:26 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 353.
Dec 23 21:47:27 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 353.
Dec 23 21:47:27 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 353.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 353 too high. Count = 1.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 356.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 356.
Dec 23 21:47:51 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 356.
Dec 23 21:48:15 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 359.
Dec 23 21:48:15 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 359.
Dec 23 21:48:15 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 359.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 359 too high. Count = 1.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 362.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 362.
Dec 23 21:48:40 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 362.
Dec 23 21:49:04 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 366.
Dec 23 21:49:04 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 366.
Dec 23 21:49:04 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 366.
Dec 23 21:49:28 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 366 too high. Count = 1.
Dec 23 21:49:28 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 369.
Dec 23 21:49:29 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 369.
Dec 23 21:49:29 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 369.
Dec 23 21:49:41 (none) local0.warn cgminer[362]: Pool 0 stratum share submission failure
Dec 23 21:49:46 (none) local0.warn cgminer[362]: Pool 0 communication resumed, submitting work
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 369 too high. Count = 1.
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 375.
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 375.
Dec 23 21:49:53 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 375.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 375 too high. Count = 2.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 378.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE: chain 1 testing new frequency: 378.
Dec 23 21:50:17 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 378.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 378 too high. Count = 1.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE chain 1, Frequency 378 too high. Count = 3.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 381.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE chain 1 final frequency: 350.
Dec 23 21:50:42 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 381.
Dec 23 21:51:06 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 384.
Dec 23 21:51:06 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 384.
Dec 23 21:51:30 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 384 too high. Count = 1.
Dec 23 21:51:30 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 387.
Dec 23 21:51:30 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 387.
Dec 23 21:51:42 (none) local0.warn cgminer[362]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9991
Dec 23 21:51:55 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 391.
Dec 23 21:51:55 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 391.
Dec 23 21:52:19 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 391 too high. Count = 1.
Dec 23 21:52:19 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 394.
Dec 23 21:52:19 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 394.
Dec 23 21:52:43 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 397.
Dec 23 21:52:43 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 397.
Dec 23 21:53:07 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 397 too high. Count = 1.
Dec 23 21:53:07 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 400.
Dec 23 21:53:07 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 400.
Dec 23 21:53:32 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 400 too high. Count = 2.
Dec 23 21:53:32 (none) local0.notice cgminer[362]: AUTOTUNE: chain 0 testing new frequency: 406.
Dec 23 21:53:32 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 406.
Dec 23 21:53:32 (none) local0.warn cgminer[362]: Switching to pool 0 stratum+tcp://x11.eu.nicehash.com:3336
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE chain 0, Frequency 406 too high. Count = 3.
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE chain 2, Frequency 406 too high. Count = 1.
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE chain 0 final frequency: 369.
Dec 23 21:53:56 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 412.
Dec 23 21:54:20 (none) local0.notice cgminer[362]: AUTOTUNE chain 2, Frequency 412 too high. Count = 2.
Dec 23 21:54:20 (none) local0.notice cgminer[362]: AUTOTUNE: chain 2 testing new frequency: 419.
Dec 23 21:54:44 (none) local0.notice cgminer[362]: AUTOTUNE chain 2, Frequency 419 too high. Count = 3.
Dec 23 21:54:44 (none) local0.notice cgminer[362]: AUTOTUNE chain 2 final frequency: 387.
Dec 23 21:55:40 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 384.
Dec 23 21:56:09 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 381.
Dec 23 21:56:38 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 362.
Dec 23 21:57:07 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 356.
Dec 23 21:57:07 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 378.
Dec 23 21:57:36 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 353.
Dec 23 21:57:48 (none) local0.err cgminer[362]: low hashrate detection trigger: 11337.528000 Gh/s
Dec 23 21:59:01 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 350.
Dec 23 21:59:14 (none) local0.err cgminer[362]: low hashrate detection trigger: 11306.064000 Gh/s
Dec 23 21:59:31 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 300.
Dec 23 22:00:00 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:00:12 (none) local0.err cgminer[362]: low hashrate detection trigger: 9732.864000 Gh/s
Dec 23 22:00:39 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 1. New frequency: 300.
Dec 23 22:01:08 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:01:08 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 1. New frequency: 200.
Dec 23 22:02:25 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 375.
Dec 23 22:03:21 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [8128.200000], real: [7907.600466]
Dec 23 22:03:28 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:04:26 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:05:23 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [8128.200000], real: [7668.611674]
Dec 23 22:05:23 (none) local0.warn cgminer[362]: Too many ASIC's failed: [36]
Dec 23 22:07:24 (none) local0.warn cgminer[362]: Too many ASIC's failed: [38]
Dec 23 22:08:17 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 2. New frequency: 369.
Dec 23 22:08:29 (none) local0.err cgminer[362]: low hashrate detection trigger: 8065.272000 Gh/s
Dec 23 22:09:26 (none) local0.warn cgminer[362]: Too many ASIC's failed: [25]
Dec 23 22:13:29 (none) local0.warn cgminer[362]: Too many ASIC's failed: [24]
Dec 23 22:15:31 (none) local0.warn cgminer[362]: Too many ASIC's failed: [30]
Dec 23 22:19:35 (none) local0.warn cgminer[362]: Too many ASIC's failed: [35]
Dec 23 22:21:37 (none) local0.warn cgminer[362]: Too many ASIC's failed: [43]
Dec 23 22:23:09 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:23:21 (none) local0.err cgminer[362]: low hashrate detection trigger: 8065.272000 Gh/s
Dec 23 22:23:38 (none) local0.warn cgminer[362]: Too many ASIC's failed: [36]
Dec 23 22:25:39 (none) local0.warn cgminer[362]: Too many ASIC's failed: [40]
Dec 23 22:27:40 (none) local0.warn cgminer[362]: Too many ASIC's failed: [20]
Dec 23 22:29:42 (none) local0.warn cgminer[362]: Too many ASIC's failed: [40]
Dec 23 22:29:42 (none) local0.err cgminer[362]: Too many ASIC's failed, doing nothing as automatic reboot option is disabled
Dec 23 22:31:43 (none) local0.warn cgminer[362]: Too many ASIC's failed: [24]
Dec 23 22:33:45 (none) local0.warn cgminer[362]: Too many ASIC's failed: [34]
Dec 23 22:35:47 (none) local0.warn cgminer[362]: low hashrate detected. Expected: [8065.272000], real: [8063.220221]
Dec 23 22:35:47 (none) local0.warn cgminer[362]: Too many ASIC's failed: [45]
Dec 23 22:37:49 (none) local0.warn cgminer[362]: Too many ASIC's failed: [30]
Dec 23 22:37:49 (none) local0.err cgminer[362]: Too many ASIC's failed, doing nothing as automatic reboot option is disabled
Dec 23 22:39:51 (none) local0.warn cgminer[362]: Too many ASIC's failed: [35]
Dec 23 22:41:52 (none) local0.warn cgminer[362]: Too many ASIC's failed: [33]
Dec 23 22:43:54 (none) local0.warn cgminer[362]: Too many ASIC's failed: [48]
Dec 23 22:45:56 (none) local0.warn cgminer[362]: Too many ASIC's failed: [39]
Dec 23 22:45:56 (none) local0.err cgminer[362]: Too many ASIC's failed, doing nothing as automatic reboot option is disabled
Dec 23 22:47:58 (none) local0.warn cgminer[362]: Too many ASIC's failed: [52]
Dec 23 22:49:36 (none) local0.notice cgminer[362]: AUTOTUNE: too many HW errors detected on chain 0. New frequency: 200.
Dec 23 22:49:48 (none) local0.err cgminer[362]: low hashrate detection trigger: 8065.272000 Gh/s
Dec 23 22:50:00 (none) local0.warn cgminer[362]: Too many ASIC's failed: [21]
Dec 23 22:52:01 (none) local0.warn cgminer[362]: Too many ASIC's failed: [24]

[mikespax]

What percentage does 10 HW errors per hour amount to? Currently, I'm trying to stay under .1% errors. Is that too low?

[lashatatu]

What percentage does 10 HW errors per hour amount to? Currently, I'm trying to stay under .1% errors. Is that too low?

you can see percentage in that graph

[ethron]

Hi Blissz,

my L3 shows xxxxx this morning. I started the miner again. it doesn't loaded the value table below chain 1,2,3,4.

I restartet and load the firmware again. can you tell me what is going wrong? i disabled the pools now.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238900k/238900k available, 23244k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000355] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015438] pid_max: default: 32768 minimum: 301
[    0.015669] Security Framework initialized
[    0.015765] Mount-cache hash table entries: 512
[    0.024587] Initializing cgroup subsys cpuacct
[    0.024619] Initializing cgroup subsys memory
[    0.024682] Initializing cgroup subsys blkio
[    0.024819] CPU: Testing write buffer coherency: ok
[    0.025395] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025472] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026800] Brought up 1 CPUs
[    0.026823] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028109] devtmpfs: initialized
[    0.092515] pinctrl core: initialized pinctrl subsystem
[    0.092731] rstctl core: initialized rstctl subsystem
[    0.093220] regulator-dummy: no parameters
[    0.093792] NET: Registered protocol family 16
[    0.094495] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104162] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104343] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105433] platform 49000000.edma: alias fck already exists
[    0.105468] platform 49000000.edma: alias fck already exists
[    0.105497] platform 49000000.edma: alias fck already exists
[    0.106645] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106826] OMAP GPIO hardware version 0.1
[    0.108233] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109556] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110865] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111504] of_get_named_gpio_flags exited with status 52
[    0.111535] gpio-rctrl rstctl.3: loaded OK
[    0.116636] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119853] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122039] cpsw.0: No hwaddr in dt. Using 38:d2:69:6b:4e:69 from efuse
[    0.122070] cpsw.1: No hwaddr in dt. Using 38:d2:69:6b:4e:6b from efuse
[    0.137609] bio: create slab <bio-0> at 0
[    0.149749] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149990] of_get_named_gpio_flags: can't parse gpios property
[    0.150282] vmmcsd_fixed: 3300 mV
[    0.153398] SCSI subsystem initialized
[    0.153852] usbcore: registered new interface driver usbfs
[    0.153968] usbcore: registered new interface driver hub
[    0.154299] usbcore: registered new device driver usb
[    0.156412] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156446] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156638] media: Linux media interface: v0.10
[    0.156733] Linux video capture interface: v2.00
[    0.156851] pps_core: LinuxPPS API ver. 1 registered
[    0.156868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157584] Advanced Linux Sound Architecture Driver Initialized.
[    0.158769] Switching to clocksource gp_timer
[    0.176779] NET: Registered protocol family 2
[    0.177778] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177867] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177956] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178048] TCP: reno registered
[    0.178075] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178121] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178622] NET: Registered protocol family 1
[    0.179206] RPC: Registered named UNIX socket transport module.
[    0.179227] RPC: Registered udp transport module.
[    0.179241] RPC: Registered tcp transport module.
[    0.179255] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179638] Trying to unpack rootfs image as initramfs...
[    1.918789] Freeing initrd memory: 12016K
[    1.919480] CPU PMU: probing PMU on CPU 0
[    1.919513] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.920056] omap2_mbox_probe: platform not supported
[    1.923920] VFS: Disk quotas dquot_6.5.2
[    1.924154] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.925549] NFS: Registering the id_resolver key type
[    1.925654] Key type id_resolver registered
[    1.925671] Key type id_legacy registered
[    1.925738] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.926191] msgmni has been set to 490
[    1.929068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.929095] io scheduler noop registered
[    1.929111] io scheduler deadline registered
[    1.929167] io scheduler cfq registered (default)
[    1.933220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.935663] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.935946] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.596830] console [ttyO0] enabled
[    2.601374] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.610083] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.618729] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.627346] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.636376] [drm] Initialized drm 1.1.0 20060810
[    2.655050] brd: module loaded
[    2.665328] loop: module loaded
[    2.669516] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.679501] nand_get_flash_type: 2c,da against 2c,da
[    2.685032] ONFI param page 0 valid
[    2.688706] ONFI flash detected
[    2.692026] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.703940] omap2-nand: detected x8 NAND flash
[    2.708606] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.714189] omap2-nand: using custom ecc layout
[    2.719032] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.725425] Creating 10 MTD partitions on "omap2-nand.0":
[    2.731126] 0x000000000000-0x000000020000 : "spl"
[    2.737929] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.745371] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.752802] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.760161] 0x000000080000-0x000000240000 : "u-boot"
[    2.768438] 0x000000240000-0x000000260000 : "bootenv"
[    2.775361] 0x000000260000-0x000000280000 : "fdt"
[    2.781995] 0x000000280000-0x000000780000 : "kernel"
[    2.792999] 0x000000800000-0x000001c00000 : "root"
[    2.816498] 0x000001c00000-0x000003000000 : "config"
[    2.840273] OneNAND driver initializing
[    2.845988] usbcore: registered new interface driver asix
[    2.851810] usbcore: registered new interface driver cdc_ether
[    2.858097] usbcore: registered new interface driver smsc95xx
[    2.864212] usbcore: registered new interface driver net1080
[    2.870239] usbcore: registered new interface driver cdc_subset
[    2.876535] usbcore: registered new interface driver zaurus
[    2.882542] usbcore: registered new interface driver cdc_ncm
[    2.889265] usbcore: registered new interface driver cdc_acm
[    2.895225] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.903606] Initializing USB Mass Storage driver...
[    2.908879] usbcore: registered new interface driver usb-storage
[    2.915177] USB Mass Storage support registered.
[    2.920221] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.926931] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.932173] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.940946] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.940966] musb-hdrc: MHDRC RTL version 2.0
[    2.940981] musb-hdrc: setup fifo_mode 4
[    2.941009] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.941155] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.946200] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.952261] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.957508] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.966278] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.966299] musb-hdrc: MHDRC RTL version 2.0
[    2.966313] musb-hdrc: setup fifo_mode 4
[    2.966335] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.966476] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.971521] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.976829] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.983237] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    2.991480] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    2.991585] usb usb1: default language 0x0409
[    2.991643] usb usb1: udev 1, busnum 1, minor = 0
[    2.991666] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.998796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.006392] usb usb1: Product: MUSB HDRC host driver
[    3.011611] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.017277] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.023474] usb usb1: usb_probe_device
[    3.023504] usb usb1: configuration #1 chosen from 1 choice
[    3.023573] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.023778] hub 1-0:1.0: usb_probe_interface
[    3.023801] hub 1-0:1.0: usb_probe_interface - got id
[    3.023828] hub 1-0:1.0: USB hub found
[    3.027848] hub 1-0:1.0: 1 port detected
[    3.031988] hub 1-0:1.0: standalone hub
[    3.032008] hub 1-0:1.0: individual port power switching
[    3.032026] hub 1-0:1.0: no over-current protection
[    3.032044] hub 1-0:1.0: Single TT
[    3.032065] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.032085] hub 1-0:1.0: power on to power good time: 10ms
[    3.032139] hub 1-0:1.0: local power source is good
[    3.032256] hub 1-0:1.0: enabling power on all ports
[    3.033306] mousedev: PS/2 mouse device common for all mice
[    3.041265] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.048768] 44e3e000.rtc: already running
[    3.053270] i2c /dev entries driver
[    3.058303] pps_ldisc: PPS line discipline registered
[    3.063786] Driver for 1-wire Dallas network protocol.
[    3.071077] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.078634] cpuidle: using governor ladder
[    3.082965] cpuidle: using governor menu
[    3.087549] of_get_named_gpio_flags exited with status 6
[    3.087568] of_get_named_gpio_flags: can't parse gpios property
[    3.087583] of_get_named_gpio_flags: can't parse gpios property
[    3.087621] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.094846] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.101656] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.108885] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.116204] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.123147] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.133598] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.157515] of_get_named_gpio_flags exited with status -517
[    3.157582] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.165353] ledtrig-cpu: registered to indicate activity on CPUs
[    3.172130] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.179326] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.187489] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.193788] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.200971] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.213244] usbcore: registered new interface driver usbhid
[    3.219164] usbhid: USB HID core driver
[    3.226068] TCP: cubic registered
[    3.229594] Initializing XFRM netlink socket
[    3.234162] NET: Registered protocol family 17
[    3.239050] NET: Registered protocol family 15
[    3.243897] Key type dns_resolver registered
[    3.248533] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.256614] ThumbEE CPU extension supported.
[    3.261120] Registering SWP/SWPB emulation handler
[    3.267145] registered taskstats version 1
[    3.273762] of_get_named_gpio_flags exited with status -517
[    3.273838] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.330803] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.337257] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.351749] libphy: 4a101000.mdio: probed
[    3.356061] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.366298] Detected MACID = 38:d2:69:6b:4e:69
[    3.370983] cpsw 4a100000.ethernet: NAPI disabled
[    3.376375] of_get_named_gpio_flags exited with status -517
[    3.376442] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.385163] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.394437] cpu0 supply cpu0 not found, using dummy regulator
[    3.400922] cpufreq_cpu0: failed to scale voltage up: -22
[    3.406746] cpufreq_cpu0: failed to scale voltage up: -22
[    3.419544] ALSA device list:
[    3.422778]   No soundcards found.
[    3.427325] Freeing init memory: 264K
[    3.431381] Failed to execute /init
[    4.434288] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    4.610608] omap_elm_correct_data
[    4.616445] omap_elm_correct_data
[    5.944611] net eth0: initializing cpsw version 1.12 (0)
[    5.953554] net eth0: phy found : id is : 0x7c0f1
[    5.958996] libphy: PHY 4a101000.mdio:01 not found
[    5.964192] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.028836] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 24 08:23:39 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec 24 08:23:39 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 24 08:23:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec 24 08:23:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec 24 08:23:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio47/value  chain 2
Dec 24 08:23:39 (none) local0.notice cgminer[361]:  detected at /sys/class/gpio/gpio44/value  chain 3
Dec 24 08:23:39 (none) local0.notice cgminer[361]: detect total chain num 4
Dec 24 08:23:39 (none) local0.notice cgminer[361]: i2c init ok
Dec 24 08:23:49 (none) local0.notice cgminer[361]: in tty_init
Dec 24 08:23:49 (none) local0.notice cgminer[361]: tty_init 0
Dec 24 08:23:49 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[0]
Dec 24 08:23:49 (none) local0.notice cgminer[361]: tty_init 1
Dec 24 08:23:49 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[1]
Dec 24 08:23:49 (none) local0.notice cgminer[361]: tty_init 2
Dec 24 08:23:49 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[2]
Dec 24 08:23:49 (none) local0.notice cgminer[361]: tty_init 3
Dec 24 08:23:49 (none) local0.notice cgminer[361]: Start A New Asic Response.Chain Id:[3]
Dec 24 08:23:50 (none) local0.notice cgminer[361]: open device over
Dec 24 08:23:50 (none) local0.notice cgminer[361]: send cmd to get chip address
Dec 24 08:23:52 (none) local0.notice cgminer[361]: Chain 0 ASIC 0 !!!
Dec 24 08:23:52 (none) local0.notice cgminer[361]: Chain 1 ASIC 0 !!!
Dec 24 08:23:52 (none) local0.notice cgminer[361]: Chain 2 ASIC 0 !!!
Dec 24 08:23:52 (none) local0.notice cgminer[361]: Chain 3 ASIC 0 !!!
Dec 24 08:23:52 (none) local0.notice cgminer[361]: Need to recheck asic num !!!
Dec 24 08:24:00 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec 24 08:24:00 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 24 08:24:00 (none) local0.notice cgminer[498]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec 24 08:24:00 (none) local0.notice cgminer[498]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec 24 08:24:00 (none) local0.notice cgminer[498]:  detected at /sys/class/gpio/gpio47/value  chain 2
Dec 24 08:24:00 (none) local0.notice cgminer[498]:  detected at /sys/class/gpio/gpio44/value  chain 3
Dec 24 08:24:00 (none) local0.notice cgminer[498]: detect total chain num 4
Dec 24 08:24:00 (none) local0.notice cgminer[498]: i2c init ok
Dec 24 08:24:09 (none) local0.notice cgminer[498]: in tty_init
Dec 24 08:24:09 (none) local0.notice cgminer[498]: tty_init 0
Dec 24 08:24:09 (none) local0.notice cgminer[498]: Start A New Asic Response.Chain Id:[0]
Dec 24 08:24:09 (none) local0.notice cgminer[498]: tty_init 1
Dec 24 08:24:09 (none) local0.notice cgminer[498]: Start A New Asic Response.Chain Id:[1]
Dec 24 08:24:10 (none) local0.notice cgminer[498]: tty_init 2
Dec 24 08:24:10 (none) local0.notice cgminer[498]: Start A New Asic Response.Chain Id:[2]
Dec 24 08:24:10 (none) local0.notice cgminer[498]: tty_init 3
Dec 24 08:24:10 (none) local0.notice cgminer[498]: Start A New Asic Response.Chain Id:[3]
Dec 24 08:24:10 (none) local0.notice cgminer[498]: open device over
Dec 24 08:24:10 (none) local0.notice cgminer[498]: send cmd to get chip address
Dec 24 08:24:12 (none) local0.notice cgminer[498]: Chain 0 ASIC 0 !!!
Dec 24 08:24:12 (none) local0.notice cgminer[498]: Chain 1 ASIC 0 !!!
Dec 24 08:24:12 (none) local0.notice cgminer[498]: Chain 2 ASIC 0 !!!
Dec 24 08:24:12 (none) local0.notice cgminer[498]: Chain 3 ASIC 0 !!!
Dec 24 08:24:12 (none) local0.notice cgminer[498]: Need to recheck asic num !!!
Dec 24 08:24:14 (none) local0.notice cgminer[498]: Chain 0 ASIC 0 !!!
Dec 24 08:24:14 (none) local0.notice cgminer[498]: Chain 1 ASIC 0 !!!
Dec 24 08:24:14 (none) local0.notice cgminer[498]: Chain 2 ASIC 0 !!!
Dec 24 08:24:14 (none) local0.notice cgminer[498]: Chain 3 ASIC 0 !!!
Dec 24 08:24:14 (none) local0.notice cgminer[498]: frequency = '350'
Dec 24 08:24:14 (none) local0.notice cgminer[498]: dev.timeout = 50
Dec 24 08:24:15 (none) local0.notice cgminer[498]: opt_bitmain_L3_core_temp : 2
Dec 24 08:24:16 (none) local0.notice cgminer[498]: send cmd to open block
Dec 24 08:24:19 (none) local0.err cgminer[498]: cgminer time error total_secs = 1514103859.371016 last_total_secs = 1.000000
Dec 24 08:24:19 (none) local0.warn cgminer[498]: Failed to resolve (?wrong URL) hub.miningpoolhub.com:20 52
Dec 24 08:24:19 (none) local0.warn cgminer[498]: Pool 1 stratum+tcp://pool.mylinx.io:3012 alive, testing stability
Dec 24 08:24:19 (none) local0.warn cgminer[498]: Switching to pool 1 stratum+tcp://pool.mylinx.io:3012
Dec 24 08:24:25 (none) local0.warn cgminer[498]: API running in IP access mode on port 4028 (17)
Dec 24 08:26:03 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec 24 08:26:03 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 24 08:26:03 (none) local0.notice cgminer[6814]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec 24 08:26:03 (none) local0.notice cgminer[6814]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec 24 08:26:03 (none) local0.notice cgminer[6814]:  detected at /sys/class/gpio/gpio47/value  chain 2
Dec 24 08:26:03 (none) local0.notice cgminer[6814]:  detected at /sys/class/gpio/gpio44/value  chain 3
Dec 24 08:26:03 (none) local0.notice cgminer[6814]: detect total chain num 4
Dec 24 08:26:03 (none) local0.notice cgminer[6814]: i2c init ok
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: in tty_init
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: tty_init 0
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: Start A New Asic Response.Chain Id:[0]
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: tty_init 1
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: Start A New Asic Response.Chain Id:[1]
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: tty_init 2
Dec 24 08:26:12 (none) local0.notice cgminer[6814]: Start A New Asic Response.Chain Id:[2]
Dec 24 08:26:13 (none) local0.notice cgminer[6814]: tty_init 3
Dec 24 08:26:13 (none) local0.notice cgminer[6814]: Start A New Asic Response.Chain Id:[3]
Dec 24 08:26:13 (none) local0.notice cgminer[6814]: open device over
Dec 24 08:26:13 (none) local0.notice cgminer[6814]: send cmd to get chip address
Dec 24 08:26:15 (none) local0.notice cgminer[6814]: Chain 0 ASIC 0 !!!
Dec 24 08:26:15 (none) local0.notice cgminer[6814]: Chain 1 ASIC 0 !!!
Dec 24 08:26:15 (none) local0.notice cgminer[6814]: Chain 2 ASIC 0 !!!
Dec 24 08:26:15 (none) local0.notice cgminer[6814]: Chain 3 ASIC 0 !!!
Dec 24 08:26:15 (none) local0.notice cgminer[6814]: Need to recheck asic num !!!
Dec 24 08:26:21 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec 24 08:26:21 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 24 08:26:21 (none) local0.notice cgminer[6903]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec 24 08:26:21 (none) local0.notice cgminer[6903]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec 24 08:26:21 (none) local0.notice cgminer[6903]:  detected at /sys/class/gpio/gpio47/value  chain 2
Dec 24 08:26:21 (none) local0.notice cgminer[6903]:  detected at /sys/class/gpio/gpio44/value  chain 3
Dec 24 08:26:21 (none) local0.notice cgminer[6903]: detect total chain num 4
Dec 24 08:26:21 (none) local0.notice cgminer[6903]: i2c init ok
Dec 24 08:26:21 (none) local0.err cgminer: Miner compile time: Fri Aug 25 17:28:57 CST 2017 type: Antminer L3+
Dec 24 08:26:21 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 24 08:26:21 (none) local0.notice cgminer[6926]:  detected at /sys/class/gpio/gpio51/value  chain 0
Dec 24 08:26:21 (none) local0.notice cgminer[6926]:  detected at /sys/class/gpio/gpio48/value  chain 1
Dec 24 08:26:21 (none) local0.notice cgminer[6926]:  detected at /sys/class/gpio/gpio47/value  chain 2
Dec 24 08:26:21 (none) local0.notice cgminer[6926]:  detected at /sys/class/gpio/gpio44/value  chain 3
Dec 24 08:26:21 (none) local0.notice cgminer[6926]: detect total chain num 4
Dec 24 08:26:21 (none) local0.notice cgminer[6926]: i2c init ok
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: in tty_init
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: tty_init 0
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: Start A New Asic Response.Chain Id:[0]
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: tty_init 1
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: Start A New Asic Response.Chain Id:[1]
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: tty_init 2
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: Start A New Asic Response.Chain Id:[2]
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: tty_init 3
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: Start A New Asic Response.Chain Id:[3]
Dec 24 08:26:31 (none) local0.notice cgminer[6926]: open device over
Dec 24 08:26:32 (none) local0.notice cgminer[6926]: send cmd to get chip address
Dec 24 08:26:34 (none) local0.notice cgminer[6926]: Chain 0 ASIC 0 !!!
Dec 24 08:26:34 (none) local0.notice cgminer[6926]: Chain 1 ASIC 0 !!!
Dec 24 08:26:34 (none) local0.notice cgminer[6926]: Chain 2 ASIC 0 !!!
Dec 24 08:26:34 (none) local0.notice cgminer[6926]: Chain 3 ASIC 0 !!!
Dec 24 08:26:34 (none) local0.notice cgminer[6926]: Need to recheck asic num !!!
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: Chain 0 ASIC 0 !!!
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: Chain 1 ASIC 0 !!!
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: Chain 2 ASIC 0 !!!
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: Chain 3 ASIC 0 !!!
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: frequency = '384'
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: dev.timeout = 46
Dec 24 08:26:36 (none) local0.notice cgminer[6926]: opt_bitmain_L3_core_temp : 2
Dec 24 08:26:38 (none) local0.notice cgminer[6926]: send cmd to open block
Dec 24 08:26:40 (none) local0.err cgminer[6926]: cgminer time error total_secs = 1514104000.789755 last_total_secs = 1.000000
Dec 24 08:26:40 (none) local0.warn cgminer[6926]: Failed to resolve (?wrong URL) litecoinpool.org:3 333
Dec 24 08:26:40 (none) local0.warn cgminer[6926]: Failed to resolve (?wrong URL) hub.miningpoolhub.com:20 52
Dec 24 08:26:40 (none) local0.warn cgminer[6926]: Failed to resolve (?wrong URL) pool.mylinx.io:3 012
Dec 24 08:26:50 (none) local0.warn cgminer[6926]: Waiting for work to be available from pools.

[sanitariu]

This topic is about D3 not L3.
I guess blissz can not help because he does not own L3.
Some general suggestions: try to keep cold the device. Stop and clean all fans.
Try to reflash with original firmware and if nothing helps contact bitmain support.