Show Posts
|
Pages: [1]
|
Hi all I am a newbie and got few blades with 80 chips (2x40) to learn.
I have hard time to set them up in my windows 10 laptop
They are both recognized from cgminer but only one seems to mine
BFF miner does not recognize them at all
Any tips or hints highly appreciated Thank you
|
|
|
I have also a couple of them just to experiment.
Do you have any alt coin which is good to mine?
|
|
|
All, thank you so much for your advice.
However if you can check the below and let me know what i am doing wrong. My GSD are supposed to be at 2X2,5 and i only get the one mining.
what i still not get is how do i read at which port my devices are. I have Windows 10 and the device Manager indicates Port_#0002.Hub_#0001 and Port_#0001.Hub_#0001
i think i am really bad in making this working. GSD 1 does nothing and i assume i do something wrong as it is the same at both pc. cgminer version 4.3.5 - Started: [2018-01-03 08:58:48] -------------------------------------------------------------------------------- (5s):5.768M (1m):5.709M (5m):4.202M (15m):2.069M (avg):5.728Mh/s A:13312 R:0 HW:2 WU:1.6/m Connected to litecoinpool.org diff 1.02K with stratum as user Block: 25ab9e24... Diff:3.78M Started: [09:05:57] Best share: 156K -------------------------------------------------------------------------------- SB management [P]ool management ettings [D]isplay options [Q]uit 0: GSD 48D5717B3135: 850 MHz SCRYPT | 2.817M / 2.842Mh/s WU:1.6/m 1: GSD 48EC85643734: 850 MHz SCRYPT | 2.885M / 2.885Mh/s WU:0.0/m -------------------------------------------------------------------------------- [2018-01-03 09:02:04] Pool 0 difficulty changed to 1024 [2018-01-03 09:02:04] Accepted 0328b86e Diff 20.7K/2048 GSD 0 [2018-01-03 09:02:09] Stratum from pool 0 requested work restart [2018-01-03 09:02:10] Accepted 193b5651 Diff 2.6K/1024 GSD 0 [2018-01-03 09:02:29] Accepted 282abf0b Diff 1.63K/1024 GSD 0 [2018-01-03 09:02:36] Accepted 6bc5065c Diff 156K/1024 GSD 0 [2018-01-03 09:02:47] Accepted 2280087e Diff 1.9K/1024 GSD 0 [2018-01-03 09:02:49] Stratum from pool 0 requested work restart [2018-01-03 09:03:28] Accepted 2544ffdf Diff 1.76K/1024 GSD 0 [2018-01-03 09:03:31] Accepted 1f112c57 Diff 2.11K/1024 GSD 0 [2018-01-03 09:03:36] Accepted 16b14d81 Diff 2.89K/1024 GSD 0 [2018-01-03 09:03:42] Stratum from pool 0 requested work restart [2018-01-03 09:04:07] Stratum from pool 0 requested work restart [2018-01-03 09:04:28] Accepted 2748dfb9 Diff 1.67K/1024 GSD 0 [2018-01-03 09:05:30] Accepted 32c61738 Diff 1.29K/1024 GSD 0 [2018-01-03 09:05:36] Accepted 254bfd21 Diff 1.76K/1024 GSD 0 [2018-01-03 09:05:57] Stratum from pool 0 detected new block [2018-01-03 09:06:08] Accepted 2e18b89d Diff 1.42K/1024 GSD 0
Thank you so much for the help
|
|
|
Dear forum
i am a super newbie in this sector. I have just received 2 gridseed blades (2 set of 2 each). I have managed to install all the drivers according to the forum. I run cgminer and recognizes both blades at both pc which are installed.
However in both of the computers only one blade seems to mining (green light and results)
I assume i do something wrong in the bat file cgminer.exe --scrypt -o stratum+tcp://stratum.YOURPOOL.COM:123 -u USERNAME -p PASSWORD --gridseed-options=baud=115200,freq=800,chips=40 --hotplug 5
Do you have any hint which can help me and guide?
thank you
|
|
|
|