 Show Posts
|
|
Pages: [1]
|
Baikal Miner can no longer mine at Zpool  All it does is jumping through the pools and chooses a dash pool, same with nicehash, it just skips them? Setup: stratum+tcp://qubit.mine.zpool.ca:4733 Algo= qubit User= my BTC wallet Pass= c=BTC Extranonce= Yes Same with Quark, Skein and My-gr (on the right port oc) Anyone Change the location for the strat qubit.<>.mine.zpool.ca:4733 <> = na or eu or sea na = North America eu = Europe sea = South East Asia Hi, Still the same, status still shows the link as dead... |
|
|
|
Baikal Miner can no longer mine at Zpool All it does is jumping through the pools and chooses a dash pool, same with nicehash, it just skips them? Setup: stratum+tcp://qubit.mine.zpool.ca:4733 Algo= qubit User= my BTC wallet Pass= c=BTC Extranonce= Yes Same with Quark, Skein and My-gr (on the right port oc) Anyone |
|
|
|
About the Community Pool ...
I've been mining all day with one of my 13 Card Nvidia 1070 Rig, and i get around 7400 H/S using Simplemining with Xmrig-nvidia ....
But i still can't se any results when typing in my wallet adresse, Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp at the pool....
Why is that ?
ok, my wallet i still syncing and have a long way still, but i should see some results in the pool when mining for a whole day .. or ?
I don't use the Community pool anymore but it should keep the old data and when I had a look there was nothing showing, so I had a look on the other two pools I've used and the old data was there, but, and here's the fun bit, when I went back to the Community pool my old data showed up. Have a look again it could have been a delay in updating the results, or double check you are mining to the Community pool. Mining for 2 Days still nothing showing... and nothing i the block explorer, guess somthing is quite wrong in the blockchain ? you are using the right wallet adress to mine to? please doublecheck. also in the dashboard of the commpool remove your wallet adres then readd it and press enter. if that doesnt work join our discord and check with the pool operator mentioned in my last message. this is my wallet, and natually the same i use in my miner Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp i have checked and dobble checked it 10 times now... Im using the windows GUI wallet, and simplemining.net on my 13 Card rig.. mining for 2 days now... nothing in my wallet, and nothing on community pool, or in blockexplorer There are some things you can do to test your setup. 1] Try mining to a different pool (at least 2 different pools), if you still don't see any results at the pool then you know it's not a pool problem. 2] If [1] above confirms it's not a pool problem try mining with Windows to check if it's not a simplemining configuration problem. 3] Try a different miner - this is probably not going to make any difference but it's worth a try if all else fails. I will try that.. In the GUI wallet, in the receive tap, i guess the top address is my wallet adress (thats the one i use) below theres a payment ID and an integrated address, what is the difference ? The integrated was filled only when i press "generate" so i guess its just for a specific payment i want to receive ? Got it!!! Had same problem on cryptoknight.cc so i changed miner, now using xmr-stack on simplemining.net working like a charm!!!  |
|
|
|
About the Community Pool ...
I've been mining all day with one of my 13 Card Nvidia 1070 Rig, and i get around 7400 H/S using Simplemining with Xmrig-nvidia ....
But i still can't se any results when typing in my wallet adresse, Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp at the pool....
Why is that ?
ok, my wallet i still syncing and have a long way still, but i should see some results in the pool when mining for a whole day .. or ?
I don't use the Community pool anymore but it should keep the old data and when I had a look there was nothing showing, so I had a look on the other two pools I've used and the old data was there, but, and here's the fun bit, when I went back to the Community pool my old data showed up. Have a look again it could have been a delay in updating the results, or double check you are mining to the Community pool. Mining for 2 Days still nothing showing... and nothing i the block explorer, guess somthing is quite wrong in the blockchain ? you are using the right wallet adress to mine to? please doublecheck. also in the dashboard of the commpool remove your wallet adres then readd it and press enter. if that doesnt work join our discord and check with the pool operator mentioned in my last message. this is my wallet, and natually the same i use in my miner Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp i have checked and dobble checked it 10 times now... Im using the windows GUI wallet, and simplemining.net on my 13 Card rig.. mining for 2 days now... nothing in my wallet, and nothing on community pool, or in blockexplorer There are some things you can do to test your setup. 1] Try mining to a different pool (at least 2 different pools), if you still don't see any results at the pool then you know it's not a pool problem. 2] If [1] above confirms it's not a pool problem try mining with Windows to check if it's not a simplemining configuration problem. 3] Try a different miner - this is probably not going to make any difference but it's worth a try if all else fails. I will try that.. In the GUI wallet, in the receive tap, i guess the top address is my wallet adress (thats the one i use) below theres a payment ID and an integrated address, what is the difference ? The integrated was filled only when i press "generate" so i guess its just for a specific payment i want to receive ? |
|
|
|
About the Community Pool ...
I've been mining all day with one of my 13 Card Nvidia 1070 Rig, and i get around 7400 H/S using Simplemining with Xmrig-nvidia ....
But i still can't se any results when typing in my wallet adresse, Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp at the pool....
Why is that ?
ok, my wallet i still syncing and have a long way still, but i should see some results in the pool when mining for a whole day .. or ?
I don't use the Community pool anymore but it should keep the old data and when I had a look there was nothing showing, so I had a look on the other two pools I've used and the old data was there, but, and here's the fun bit, when I went back to the Community pool my old data showed up. Have a look again it could have been a delay in updating the results, or double check you are mining to the Community pool. Mining for 2 Days still nothing showing... and nothing i the block explorer, guess somthing is quite wrong in the blockchain ? you are using the right wallet adress to mine to? please doublecheck. also in the dashboard of the commpool remove your wallet adres then readd it and press enter. if that doesnt work join our discord and check with the pool operator mentioned in my last message. this is my wallet, and natually the same i use in my miner Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp i have checked and dobble checked it 10 times now... Im using the windows GUI wallet, and simplemining.net on my 13 Card rig.. mining for 2 days now... nothing in my wallet, and nothing on community pool, or in blockexplorer |
|
|
|
About the Community Pool ...
I've been mining all day with one of my 13 Card Nvidia 1070 Rig, and i get around 7400 H/S using Simplemining with Xmrig-nvidia ....
But i still can't se any results when typing in my wallet adresse, Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp at the pool....
Why is that ?
ok, my wallet i still syncing and have a long way still, but i should see some results in the pool when mining for a whole day .. or ?
I don't use the Community pool anymore but it should keep the old data and when I had a look there was nothing showing, so I had a look on the other two pools I've used and the old data was there, but, and here's the fun bit, when I went back to the Community pool my old data showed up. Have a look again it could have been a delay in updating the results, or double check you are mining to the Community pool. Mining for 2 Days still nothing showing... and nothing i the block explorer, guess somthing is quite wrong in the blockchain ? |
|
|
|
|
About the Community Pool ...
I've been mining all day with one of my 13 Card Nvidia 1070 Rig, and i get around 7400 H/S using Simplemining with Xmrig-nvidia ....
But i still can't se any results when typing in my wallet adresse, Se2zF6evd6aS52DoAWoyoDaMX4JF94mFtNrpuRmiXjvoZXCiYSNMp4hXSRnoxXvjtgBRq5CMbK1YJ7P 1Fd8s6yAV1AkuXmoMp at the pool....
Why is that ?
ok, my wallet i still syncing and have a long way still, but i should see some results in the pool when mining for a whole day .. or ?
|
|
|
|
How do i import the blockchain file from github ? Theres No import in the windows GUI version, so i gusee i have to use the cli version... but i dont know how? On github, all it says is : To import the file, use the following example command stellite-blockchain-import --input-file Stellite-Blockchain-Export-Block-109766.raw --verify 0 Yeah right... but where and how... do they asume that we all are expert nerds.... ? download the cli version for import (it has the blockchain-import file) then after import startup GUI version. Great! but how ....? in the same folder as the GUI version or? Sigh!!! Cant get the CLI version running, something with no deamon running.... Where is the wallet file located in the GUI version... Why not just put the import function in the GUI version, so stupid fools like me can get it working.... This is for a Windows install (I've done this for Sumokoin so should be same for Stellite, and I've done it to export the Stellite blockchain) 1) Install GUI wallet https://github.com/stellitecoin/StelliteGUI/releases/download/v0.0.8-1/StelliteGUI-win-V0.0.8-1.zip2) Install CLI wallet to a different folder https://github.com/stellitecoin/Stellite/releases/download/1.2.3.2/Windows-x64-1.2.3.2.zip3) Download bootstrap file https://github.com/stellitecoin/Stellite/releases/download/1.2.3.2/Stellite-Blockchain-Export-Block-109766.raw4) Run GUI wallet, then exit GUI wallet, this will create any extra files/folders it may need. 5) In folder "C:\ProgramData\stellite" create a subfolder "export" so it should be like this "C:\ProgramData\stellite\export" 6) Delete (or save elswhere just in case, espacially if wallet is there) everything in "C:\ProgramData\stellite". 7) Copy the bootstrap RAW file to "C:\ProgramData\stellite\export"  In the CLI wallet run file (in a DOS box) "stellite-blockchain-import.exe --verify 0" (don't know if "--verify 0" is needed or not, but worked for Sumokoin). 9) Wait for it to sync, it may look like it stalls but give it time. Note: How to do it for Sumokoin https://www.reddit.com/r/sumokoin/comments/8abejo/psa_what_to_do_if_sumowallet_cli_or_gui_stalls/Thanks for trying, but i just got some new errors in the log file, so i giveup for now, and waiting for the wallet to sync.....  |
|
|
|
How do i import the blockchain file from github ? Theres No import in the windows GUI version, so i gusee i have to use the cli version... but i dont know how? On github, all it says is : To import the file, use the following example command stellite-blockchain-import --input-file Stellite-Blockchain-Export-Block-109766.raw --verify 0 Yeah right... but where and how... do they asume that we all are expert nerds.... ? download the cli version for import (it has the blockchain-import file) then after import startup GUI version. Great! but how ....? in the same folder as the GUI version or? Sigh!!! Cant get the CLI version running, something with no deamon running.... Where is the wallet file located in the GUI version... Why not just put the import function in the GUI version, so stupid fools like me can get it working.... |
|
|
|
How do i import the blockchain file from github ? Theres No import in the windows GUI version, so i gusee i have to use the cli version... but i dont know how? On github, all it says is : To import the file, use the following example command stellite-blockchain-import --input-file Stellite-Blockchain-Export-Block-109766.raw --verify 0 Yeah right... but where and how... do they asume that we all are expert nerds.... ? |
|
|
|
cryptopia deposit Status: Maintenance
Reason: 14/3/18 - Maintenance as Dev's request.'
well, for how long?
is there anyone from the developers here? answer that with this exchange and when to wait for the unlocking of the purse there? or does the project die  Well..... No dev's on anymore ? my NMS for the next Masternode is Locked on Cryptopia, would be great to know for how long, and mabye why ..... ?? |
|
|
|
Hi, Having problems with the "old" 0.0.0.2 Wallet, when i try to open it i get this error "A general unexpected critical error has occurred: couldn't connect to server:EOF reached (code1)" What is that ?? How can i be sure that i still have mine coins ? I have downloaded the new wallet from github and would like to get my coins there, but how ? |
|
|
|
I've downloaded v. 0.0.0.2 Wallet and never had the 0.0.0.1 installed on this machine, but in the top it says Zelcash Wallet 0.0.0.1 ? And it wont sync, i i have the addnode IP's in the conf file.. Why is this Wallet so hard to get working, i wanna start mining....  |
|
|
|
I've tryied to set up a new wallet from stratch, and it looks constantly fails, any ideas? (I've tryied -reindex , addnode's and have set up new wallet on new machine - issue remains: ...
2018-02-17 03:52:28 ERROR: CheckBlockHeader(): Equihash solution invalid
2018-02-17 03:52:28 Misbehaving: 45.76.128.62:16125 (0 -> 100) BAN THRESHOLD EXCEEDED
2018-02-17 03:52:28 ERROR: invalid header received
2018-02-17 03:52:28 ProcessMessages(headers, 238081 bytes) FAILED peer=5
Looks I've managed to trick the client and skipped blockchain checks, so now I can see the balance and send out coins. But wtf, seriously? How did you do that? I still can't get wallet to work, not syncing at all, starting with 4 or 5 connections, few sec later 0 and then nothing..... |
|
|
|
|
