Show Posts
|
Pages: [1] 2 »
|
When the directions say this... For AMD cards, set the following environment variables, especially if you have 2...4GB cards:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
Does that mean to put those environment variables inside the start.bat somewhere? If so, how exactly so that the syntax is correct? For now, my start.bat simply looks like this: EthDcrMiner64.exe -epool ssl://us2.ethermine.org:5555 -eworker Rig2 -ewal 0xC42D3d4a31d7aeEbFd25e51858F45172B6047F50 -epsw x Thanks in advance, Darcendsun It should look like this: GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool ssl://us2.ethermine.org:5555 -eworker Rig2 -ewal 0xC42D3d4a31d7aeEbFd25e51858F45172B6047F50 -epsw x You should also try at least: -rxboost 1 if you have rx card that is
|
|
|
Just in case you may want to know about EonBot: This is our farewell... EonView and EonBot as a whole started as an passionate and interesting project. As the time went by we were faced by numerous problems and challenges. We had our ups and downs, but we always tried our hardest and we were keep on pushing further... But one day the downfall of this project began when in a short amount of time we encountered several hits below the belt - we got scammed by the guy who was developing our website and within next several weeks our community manager disappeared from the face of the earth. It didn't stop there and the problems were keep on piling. By the sheer pressure of our keep on growing tasks, soon we found ourselves lost in this situation and that the project wasn't moving forward anymore. We tried fixing it by pushing the deadlines and doing several stuff at one time, but it didn't work out and even backfired. That's when sadly, one of the developers decided to fully leave the project. There were lot's of discussions going back and forth, but in the end I came up to the conclusion that this is where the story of the EonBot and EonView ends. I just wanted to say sorry for those that were here till the last minute, but we hope that this won't stop your from going forward. We are releasing unfinished v2.0.0 versions of the EonBot and EonView in open source in hopes that some of you will find some use of it and continue what we started. As always... Thank you and good luck with trading. https://github.com/eondevsIt was good while it lasted, just another empty promise
|
|
|
What drivers version are you using? 18.6.1 won't recognize my rx590 and using 18.11.2 with 1500/950 2200/950 I'm only hashing 746h/s on average using srbminer and teamredminer, cnsaber and cnv8 are both performing worst than my rx580.
My card is the Sapphire rx590 with micron memory. (got the bios file ready using PBE 3 Pro, but haven't flashed the card yet)
|
|
|
Should we expect the possibility to flash the rx 580 with an rx 590 for better performance?
|
|
|
PBE v3 is Great really fine tuned my bios, thank you for your work Matthew! my Only question is When Vega?
|
|
|
I've been looking to buy FPGA but can't help to see red flags: You said you're not new but your website was made last year and you just pay for one year? Updated Date: 2018-08-07T21:04:01 Creation Date: 2017-12-17T12:15:26 You said you're in UK but the site is registered in Toronto? Registrant City: Toronto Registrant State/Province: ON Registrant Country: CA 272 Bath St Glasgow G2 4JR, UK takes me to a Virtual Office? Blue Square Offices I don't want to imply anything but I see somebody trying to hide something,sorry If I offended anybody but I wont give my hard earned money that easily. PS: Huawei doesn't need merit on the forum but they don't need to sell here either...maybe a joke?
|
|
|
It looks familiar to dwarf also: Name: GPUHoarder Posts: 206 Activity: 84 Merit: 23 Position: Member Date Registered: March 01, 2018, 05:55:00 PM Last Active: June 30, 2018, 05:16:23 PM
|
|
|
Lyra2z is very profitable right now and low watt
|
|
|
Time to show our love for The CROW! I'm in, vote 101 we need like a 1000 more
|
|
|
Yes, I think I'm experiencing the "slow down even more" part of the tweak instead of more performance, I will stick to removing the basic annoyances only... thank you for your advice
|
|
|
Hey Guys Have you tried the win10 tweaks for mining by DeadManWalking? If not you can get it here: https://github.com/DeadManWalkingTO/Windows10MiningTweaksDmWI'm using it in two rigs but I have found the rigs actually slower, the first one have a celeron and 4gb of memory so I didn't care but then I ran it on an i5 with 8gb and I notice the system actually slower... If you have tried can you share your experience with it? Its really worth it?
|
|
|
Here is what Octominer offers:
COMPLETE MINING RIG WITH EVERYTHING NEEDED TO START MINING. 8X AMD XFX RX580 8GB GPU INCLUDED. JUST PLUG IT IN THE WALL AND START MINING! SPECIFICATIONS: Motherboard : OCTOMINER B8PLUS CPU: Intel® Celeron® Processor 3855U GPU: 8X AMD XFX RX580 8GB RAM: 4GB DDR4 SODIMM SSD: 60GB mSATA SSD POWER SUPPLY: 2400W 220V ATX (16x PCIe) Ports: 2x USB, 1x VGA, 1x RJ45 Network PRICE $3950.00
They also take crypto and are trusted by the mining community. Why would we buy from you?
|
|
|
Thank You! Guys I got it fixed. It was an OpenCL problem, was nothing to do with the miner, just didn't realize that my gpuz was missing the opencl checkmark, now is fixed and mining flawlessly, thank you brianmct for providing a miner for the g'old AMD Troopers.
|
|
|
Ideas after you config file. And what GPU model? sgminer.exe -k x16r -o stratum+tcp://us.ravenminer.com:5678 -u myrvnwallet -p worker1 -X 256 (also tried -X 64 same result) This is a fresh Win10 install updated, redist installed, blockchain drivers XFX Core Black RX580 brand new out of the box with stock bios, installed in the pcie 16x slot... 1st. add --log-file log-x16r.txt after -X256 and look inside when starting miner. 2nd. the miner must compile a kernel for you GPU its may be more than 2-3 minutes up to 5. see log-x16r.txt 3rd. try without -X256. And why you use blockchain drivers? it's does not matter but why? new adrenalin drivers is good performance and more flexible with playing with voltage and overclocks(for me). Already did in my first post and this is what I got: [23:17:04] Started avermore 1.4.0 [23:17:04] * using Jansson 2.7 [23:17:18] Started avermore 1.4.0 [23:17:18] * using Jansson 2.7 [23:19:09] Started avermore 1.4.0 [23:19:09] * using Jansson 2.7 [23:19:13] Started avermore 1.4.0 [23:19:13] * using Jansson 2.7 Also tried new Adrenalin drivers, removed the X256... with "pause" as per example.bat gives me: Press any key to continue... if I hit any key just closes and without the "pause" simply closes down. Thank you for your time helping me on this Kaezar
|
|
|
|