 Show Posts
|
|
Pages: [1]
|
MultiMiner 2.8 is now officially available with the following features and improvements: [...] I'm sorry Nate, but... what do you advise me to do? Throw in the towel? If I've well understood, also the latest 2.8 release can't solve my problem. I was dying to run MultiMiner on my Mac...  |
|
|
|
Interesting! That explains why it's not working  For some reason BFGMiner on your system isn't getting to the part where it outputs all the devices. So... I AM DOOMED! |
|
|
|
Can you post the rest of the output please? All of the way down until the next command prompt. Unfortunately this wasn't enough to see what's going wrong.
It's curious, but the last line of the output is just this one: [2014-03-13 22:34:16] TBF 5a: Init: baud=115200 After the command line without --scrypt, the next command prompt doesn't appear any more. I've tried again, and waited much more time, but it's the same: it's like the process is interrupted. Unfortunately I can't give you more info. Thank you |
|
|
|
Unfortunately same as before; this is the new output after deleting the bfgminer.con file: bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
I think this is actually my bad. Please run the above without --scrypt. Hi Nate, I ran the command line without --scrypt, and this is the output: bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto -D
[2014-03-13 21:29:17] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-13 21:29:17] Started bfgminer 3.10.0
[2014-03-13 21:29:19] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:064:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:20] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:064:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:22] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:255:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:23] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:255:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:25] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:028:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:028:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:125:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:125:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:029:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:061:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:061:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:093:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:093:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:253:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:253:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] hidapi_try_lib: Successfully loaded libhidapi.dylib
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple LED Cinema Display" serial "170408FB"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Display Audio" serial "FB080417"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Ultrathin Touch Mouse" serial "00-1f-20-97-73-8c"
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:001 (path=(null), vid=05ac, pid=8006, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:125:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:002 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc. , prod=USB2.0 Hub , serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:003 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc. , prod=USB2.0 Hub , serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:004 (path=(null), vid=05ac, pid=9126, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:007 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc. , prod=USB2.0 Hub , serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:011 (path=(null), vid=05ac, pid=1006, manuf=Apple, Inc., prod=Keyboard Hub, serial=000000000000)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF01004200)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF91000200)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:005 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF11004100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:006 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FFC000F000)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:008 (path=(null), vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:010 (path=(null), vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:012 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF30FF01006100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:013 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF40FF20006100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:014 (path=(null), vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:015 (path=(null), vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:002 (path=(null), vid=05ac, pid=8206, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF00005100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF22000100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF51003100)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:Bluetooth_046d_b00d_2097738c (path=Bluetooth_046d_b00d_2097738c, vid=046d, pid=b00d, manuf=Unknown, prod=Ultrathin Touch Mouse, serial=00-1f-20-97-73-8c)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_1105_fd334000 (path=USB_05ac_1105_fd334000, vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_9226_fd336000 (path=USB_05ac_9226_fd336000, vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=170408FB)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:15000012 (path=/dev/cu.usbmodem4041, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:13000012 (path=/dev/cu.usbmodemff41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:11000012 (path=/dev/cu.usbmodem1c41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:0b000012 (path=/dev/cu.usbmodemfd341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:09000012 (path=/dev/cu.usbmodemfd511, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:07000012 (path=/dev/cu.usbmodem3d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:05000012 (path=/dev/cu.usbmodem1d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:03000012 (path=/dev/cu.usbmodemfd5311, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:01000012 (path=/dev/cu.usbmodemfd5341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemff41
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem4041
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1c41
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:26] Timers: Using gettimeofday
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem1d21
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem3d21
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem1d21: 2, Twinfury 3259333832391910002400
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem3d21: 2, Twinfury 3259333832391919002000
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5341: 2, Twinfury 3259333832370402001600
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5311: 2, Twinfury 3259333832370310001600
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd341: 2, Twinfury 3259333832391911001400
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd511: 2, Twinfury 325933383239190c000f00
[2014-03-13 21:29:30] Found TBF 0a at /dev/cu.usbmodemfd511
[2014-03-13 21:29:30] TBF 0a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 1a at /dev/cu.usbmodem3d21
[2014-03-13 21:29:30] TBF 1a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 2a at /dev/cu.usbmodemfd5311
[2014-03-13 21:29:30] TBF 2a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 3a at /dev/cu.usbmodemfd5341
[2014-03-13 21:29:30] TBF 3a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 4a at /dev/cu.usbmodem1d21
[2014-03-13 21:29:30] TBF 4a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 5a at /dev/cu.usbmodemfd341
[2014-03-13 21:29:30] TBF 5a: Init: baud=115200
(At the end I don't see, as usual, "bash-3.2$".) Long-story-short, with the current BFGMiner, --scrypt makes it not scan (some of) your USB devices. This has been addressed (in Git) for the new Scrypt ASICs but is not released yet. I crossed my streams and released a MultiMiner update that scans with --scrypt, meaning USB ASICs won't be detected unless you are using a PR of BFGMiner or building from Git. Smells like another hotfix  Edit: can you give this a try please? Pretty sure this only affects Mac users but would like to get a hotfix out either way: https://www.dropbox.com/s/kin4rvvewoceb83/MultiMiner-2.7.10.app.zipI gave it a try, but unfortunately the same as before: after scanning for hardware, no devices is detected. I thought that you had a Mac Pro like me, and that you could test MultiMiner with it, but I was wrong. At the moment I can mine only with command line via Terminal. Thanks anyway!  |
|
|
|
Anything in /Users/brunotre/.bfgminer/bfgminer.conf ? Try deleting that.
Hi Nate, Unfortunately same as before; this is the new output after deleting the bfgminer.con file: bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
[2014-03-13 17:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-13 17:33:47] Started bfgminer 3.10.0
[2014-03-13 17:33:47] CL Platform 0 vendor: Apple
[2014-03-13 17:33:47] CL Platform 0 name: Apple
[2014-03-13 17:33:47] CL Platform 0 version: OpenCL 1.2 (Dec 8 2013 21:07:05)
[2014-03-13 17:33:47] Platform 0 devices: 1
[2014-03-13 17:33:47] 0 AMD Radeon HD 7950 Compute Engine
[2014-03-13 17:33:47] Unable to load ati adl library
[2014-03-13 17:33:47] Devices detected:
[2014-03-13 17:33:47] Device (driver=opencl; procs=1)
[2014-03-13 17:33:47] Timers: Using gettimeofday
1 devices listed
bash-3.2$
|
|
|
|
Hello Nate, I'm still stuck with MultiMiner, not detecting my devices. This is the output: bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
[2014-03-11 20:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-11 20:33:47] Started bfgminer 3.10.0
[2014-03-11 20:33:47] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf
[2014-03-11 20:33:47] CL Platform 0 vendor: Apple
[2014-03-11 20:33:47] CL Platform 0 name: Apple
[2014-03-11 20:33:47] CL Platform 0 version: OpenCL 1.2 (Dec 8 2013 21:07:05)
[2014-03-11 20:33:47] Platform 0 devices: 1
[2014-03-11 20:33:47] 0 AMD Radeon HD 7950 Compute Engine
[2014-03-11 20:33:47] Unable to load ati adl library
[2014-03-11 20:33:47] Devices detected:
[2014-03-11 20:33:47] Device (driver=opencl; procs=1)
1 devices listed
bash-3.2$ Thank you |
|
|
|
Looks like BFGMiner isn't detecting your ASICs at all. Can you add -D to the command line arguments and paste the output again please?
Hello Nate, This is the output: bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
[2014-03-11 20:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-11 20:33:47] Started bfgminer 3.10.0
[2014-03-11 20:33:47] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf
[2014-03-11 20:33:47] CL Platform 0 vendor: Apple
[2014-03-11 20:33:47] CL Platform 0 name: Apple
[2014-03-11 20:33:47] CL Platform 0 version: OpenCL 1.2 (Dec 8 2013 21:07:05)
[2014-03-11 20:33:47] Platform 0 devices: 1
[2014-03-11 20:33:47] 0 AMD Radeon HD 7950 Compute Engine
[2014-03-11 20:33:47] Unable to load ati adl library
[2014-03-11 20:33:47] Devices detected:
[2014-03-11 20:33:47] Device (driver=opencl; procs=1)
1 devices listed
bash-3.2$ Thank you  |
|
|
|
Yes, I started mining following the instructions in the above linked article, and everything was working fine, both with the Twinfury units and the AMD Radeon.
I also did a test a little while ago, and everything worked regularly: both the USB units and the GPU are seen by bfgminer.
Instead, when I start Multiminer, even after running the command Scan Hardware, no device is seen by the program.
I presume no driver is necessary to have MultiMiner working, as it was not necessary before: am I wrong?
I'm dying to see MultiMiner working regularly: what can I do?
There is no difference between the driver setup for BFGMiner with or without MultiMiner. The drivers I link to are for Windows only because the majority are Windows users. If BFGMiner detects your devices when running it with -d? -S all on the command line on OS X your devices should also be detected in MultiMiner. There are no GPU driers to install on the Mac. Can you try running BFGMiner from the command line with the following arguments and then paste the output? bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt Hello Nate, Sorry for the delay of my answer. Here's the output I get after typing the command line: bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt
[2014-03-10 20:47:00] Started bfgminer 3.10.0
[2014-03-10 20:47:00] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf
[2014-03-10 20:47:00] Devices detected:
[2014-03-10 20:47:00] Device (driver=opencl; procs=1)
1 devices listed
bash-3.2$ Thanks a lot for your interest! |
|
|
|
Hello Nate, Sorry, but I saw your reply late. Yes, I started mining following the instructions in the above linked article, and everything was working fine, both with the Twinfury units and the AMD Radeon. I also did a test a little while ago, and everything worked regularly: both the USB units and the GPU are seen by bfgminer. Instead, when I start Multiminer, even after running the command Scan Hardware, no device is seen by the program. I presume no driver is necessary to have MultiMiner working, as it was not necessary before: am I wrong? I'm dying to see MultiMiner working regularly: what can I do? Thanks a lot for your attention! |
|
|
|
Your welcome.
I wish I could have done more.
Really no problem! I'm sure Nate will help me. I asked him for help also via Twitter (and hope not have annoyed him). I can't wait to see MultiMiner working!  |
|
|
|
If you were already using BFGMiner you should not need to reload the drivers. Only if you had been using cgminer.
I am not sure on a mac though how to proceed. Nate would be able to help you with that.
Sorry about that I do not have a mac to test on.
@ManeBjorn Many thanks again! |
|
|
|
Did you right click on the empty part of the screen and have it do a hardware scan? Also what software were you using with your TwinFury before you installed MultiMiner? If it was CGMiner you need to remove the drivers for it and reinstall the new drivers that you can download from the MultiMiner webiste. http://www.multiminerapp.com/You should choose the Blue/RedFury drivers. I hope this helps you. Happy Mining. Hello Nate,
I've just installed MultiMiner on my Mac Pro.
I don't understand why it can't see or the 6 Twinfury or the GPU: in the low right corner I can read 0 device(s).
Can you help me?
Thanks in advance
@ ManeBjorn Thanks a lot for your interest. Yes, I clicked for a hardware scan. Before installing MultiMiner, I was using bfgminer with Mac OS X under Terminal: no need to install drivers for either the GPU or the Twinfury units. Now that I've downloaded the Blue/Red Fury driver, how can I install it? And the driver for my AMD Radeon 7950 has to be a Windows one? Consider that I'm using a Mac: so I installed Xquartz and Mono. Thanks a lot for your attention! |
|
|
|
|
Hello Nate,
I've just installed MultiMiner on my Mac Pro.
I don't understand why it can't see or the 6 Twinfury or the GPU: in the low right corner I can read 0 device(s).
Can you help me?
Thanks in advance
|
|
|
|
|
