MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform)

[Mudbankkeith]

Absolutely - same setup. Just make sure you launch BFGMiner with --api-enable and --api-allow W:whatevermask and then MultiMiner should detect it after a few minutes. If that gives you any trouble let me know. All of the "Network Device detection" bits are just looking for open RPC API servers (BFGMiner, CGMiner, VertMiner, whatever) on the local network.

so I need to add:-
 --api-enable --api-allow W:192.168.1.16,[/Prefix] address[/subnets]

[/Prefix] address[/subnets]  ...  this bit is killing me!

For my own setup, my internal IP addresses are 192.168.0.X, 192.168.0.Y, etc. etc. For my settings I do:

Code:

--api-allow W:192.168.0.0/24 --api-listen

Sorry, it was listen not enable.

BFG restarts with the line like this

Code:

--api-allow W:192.168.1.16/24 --api-listen

and it is now scanning.
Great program Nate thankyou

[Mudbankkeith]

BFG restarts with the line like this

Code:

--api-allow W:192.168.1.16/24 --api-listen

and it is now scanning.
Great program Nate thankyou

Hi again Nate
Sorry to keep asking basic questions
Can this be expanded to see more than one session of BFG on the same device?

[ivanlabrie]

https://bitcointalk.org/index.php?topic=513400.new#new

Any thoughts guys? 

[nwoolls]

https://bitcointalk.org/index.php?topic=513400.new#new

Any thoughts guys? 

You can view the contents of the Python script here to check for any other URLs or domains:

https://github.com/Axadiw/CGMinerMobileAdapter/blob/master/CGMinerMobileAdapter.py

It's Open Source so you can read everything it is doing and sending and to whom.

As for bandwidth usage I can confirm this and already talked to the author about it. Make sure you are using his latest version from Git. It submits statistics far less frequently.

[nwoolls]

Version 2.8.0 PR2 (preview / pre-release) is now available for testing. I will be releasing this in a few hours / days barring any negative feedback.

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

• Official support for 1-chip and 5-chip GridSeed ASICs
• Notifications are now displayed when Auto-Mining switches to new coins
• When minimized to the system tray, an interactive balloon tip is displayed for in-app notifications
• Coins that fall below strategy configurations are no longer suggested for mining
• Improved overall performance
• Coin difficulty is read directly from the network once mining begins
• Worker temperatures are shown for Network Devices and the Stratum Proxy
• Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
• Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
• Added the option to save coin configurations to all rigs via MultiMiner Remoting
• Customized names for machines and devices are now pushed to MobileMiner

Note that GridSeed support requires BFGMiner 4.0 which is not out yet. If you are running Windows you can try a PR of the BFGMiner GridSeed support here:

https://www.dropbox.com/s/i8cai8x79b79gzo/bfgminer_gridseed_pr2.7z

[ManeBjorn]

You are awesome Nate. 
Thanks a ton.

Version 2.8.0 PR2 (preview / pre-release) is now available for testing. I will be releasing this in a few hours / days barring any negative feedback.

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

• Official support for 1-chip and 5-chip GridSeed ASICs
• Notifications are now displayed when Auto-Mining switches to new coins
• When minimized to the system tray, an interactive balloon tip is displayed for in-app notifications
• Coins that fall below strategy configurations are no longer suggested for mining
• Improved overall performance
• Coin difficulty is read directly from the network once mining begins
• Worker temperatures are shown for Network Devices and the Stratum Proxy
• Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
• Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
• Added the option to save coin configurations to all rigs via MultiMiner Remoting
• Customized names for machines and devices are now pushed to MobileMiner

Note that GridSeed support requires BFGMiner 4.0 which is not out yet. If you are running Windows you can try a PR of the BFGMiner GridSeed support here:

https://www.dropbox.com/s/i8cai8x79b79gzo/bfgminer_gridseed_pr2.7z

[124C41]

Nate FTW!

With the MobileMiner Pools API implementation, will we see updates for native mobile apps soon?

Keep up the great work Nate, I'll be providing feedback here and on http://talk.multiminerapp.com/ as per usual.

Version 2.8.0 PR2 (preview / pre-release) is now available for testing. I will be releasing this in a few hours / days barring any negative feedback.

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

• Official support for 1-chip and 5-chip GridSeed ASICs
• Notifications are now displayed when Auto-Mining switches to new coins
• When minimized to the system tray, an interactive balloon tip is displayed for in-app notifications
• Coins that fall below strategy configurations are no longer suggested for mining
• Improved overall performance
• Coin difficulty is read directly from the network once mining begins
• Worker temperatures are shown for Network Devices and the Stratum Proxy
• Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
• Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
• Added the option to save coin configurations to all rigs via MultiMiner Remoting
• Customized names for machines and devices are now pushed to MobileMiner

Note that GridSeed support requires BFGMiner 4.0 which is not out yet. If you are running Windows you can try a PR of the BFGMiner GridSeed support here:

https://www.dropbox.com/s/i8cai8x79b79gzo/bfgminer_gridseed_pr2.7z

[ivanlabrie]

Thanks for the clarification Nate. My friend actually figured it out eventually :p

https://bitcointalk.org/index.php?topic=513400.new#new

We'll see about the bandwidth, it scales up pretty quickly. 

[Raptor2213]

BFGminer's crashing on me again.  Any idea what's causing it?  I did just fire up a S1.  I'm sending it's output to the Stratum server, rather than using the remote feature.  I'd rather do that because it allows me to set pools for failover for this exact reason.

Code:

Problem signature:
  Problem Event Name:	APPCRASH
  Application Name:	bfgminer.exe
  Application Version:	0.0.0.0
  Application Timestamp:	057214ed
  Fault Module Name:	ntdll.dll
  Fault Module Version:	6.1.7601.18247
  Fault Module Timestamp:	521ea8e7
  Exception Code:	c0000005
  Exception Offset:	0003332f
  OS Version:	6.1.7601.2.1.0.768.3
  Locale ID:	1033
  Additional Information 1:	f90c
  Additional Information 2:	f90c508888aa2ee82e59ace4953ff971
  Additional Information 3:	f83b
  Additional Information 4:	f83ba7e2bbc72befdf213e169d547ef7

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

I just did a fresh install of MuM about a week ago in prep for this to weed out any potential instabilities.  Version 2.7.7

[brunosky]

Hello Nate,
I'm still stuck with MultiMiner, not detecting my devices.
This is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
 [2014-03-11 20:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)                    
 [2014-03-11 20:33:47] Started bfgminer 3.10.0                    
 [2014-03-11 20:33:47] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf                    
 [2014-03-11 20:33:47] CL Platform 0 vendor: Apple                    
 [2014-03-11 20:33:47] CL Platform 0 name: Apple                    
 [2014-03-11 20:33:47] CL Platform 0 version: OpenCL 1.2 (Dec  8 2013 21:07:05)                    
 [2014-03-11 20:33:47] Platform 0 devices: 1                    
 [2014-03-11 20:33:47] 	0	AMD Radeon HD 7950 Compute Engine                    
 [2014-03-11 20:33:47] Unable to load ati adl library                    
 [2014-03-11 20:33:47] Devices detected:                    
 [2014-03-11 20:33:47]  Device (driver=opencl; procs=1)                    
1 devices listed
bash-3.2$ 

Thank you

[nwoolls]

Code:

Problem signature:
  Problem Event Name:	APPCRASH
  Application Name:	bfgminer.exe
  Application Version:	0.0.0.0
  Application Timestamp:	057214ed
  Fault Module Name:	ntdll.dll
  Fault Module Version:	6.1.7601.18247
  Fault Module Timestamp:	521ea8e7
  Exception Code:	c0000005
  Exception Offset:	0003332f
  OS Version:	6.1.7601.2.1.0.768.3
  Locale ID:	1033
  Additional Information 1:	f90c
  Additional Information 2:	f90c508888aa2ee82e59ace4953ff971
  Additional Information 3:	f83b
  Additional Information 4:	f83ba7e2bbc72befdf213e169d547ef7

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

Please report any BFGMiner crashes in the BFGMiner thread - thanks! I'm not sure on this but Luke may be able to help.

[nwoolls]

I'm still stuck with MultiMiner, not detecting my devices.
This is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
 [2014-03-11 20:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)                    
 [2014-03-11 20:33:47] Started bfgminer 3.10.0                    
 [2014-03-11 20:33:47] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf                    
 [2014-03-11 20:33:47] CL Platform 0 vendor: Apple                    
 [2014-03-11 20:33:47] CL Platform 0 name: Apple                    
 [2014-03-11 20:33:47] CL Platform 0 version: OpenCL 1.2 (Dec  8 2013 21:07:05)                    
 [2014-03-11 20:33:47] Platform 0 devices: 1                    
 [2014-03-11 20:33:47] 	0	AMD Radeon HD 7950 Compute Engine                    
 [2014-03-11 20:33:47] Unable to load ati adl library                    
 [2014-03-11 20:33:47] Devices detected:                    
 [2014-03-11 20:33:47]  Device (driver=opencl; procs=1)                    
1 devices listed
bash-3.2$ 

Anything in /Users/brunotre/.bfgminer/bfgminer.conf ? Try deleting that.

[Raptor2213]

Please report any BFGMiner crashes in the BFGMiner thread - thanks! I'm not sure on this but Luke may be able to help.

I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7.  Doesn't seem to be a BFGminer issue.

[nwoolls]

I don't have that folder.  I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7.  Doesn't seem to be a BFGminer issue.

That reply was to a different user.

It's not a MultiMiner issue if BFGMiner is crashing - that's a BFGMiner issue. 2.7.7 is probably passing in different arguments than 2.4. Try doing some trial-and-error (using the Process Log) to figure out which argument is causing the error and report that to the BFGMiner thread. Thanks!

[brunosky]

Anything in /Users/brunotre/.bfgminer/bfgminer.conf ? Try deleting that.

Hi Nate,
Unfortunately same as before; this is the new output after deleting the bfgminer.con file:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
 [2014-03-13 17:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)                    
 [2014-03-13 17:33:47] Started bfgminer 3.10.0                    
 [2014-03-13 17:33:47] CL Platform 0 vendor: Apple                    
 [2014-03-13 17:33:47] CL Platform 0 name: Apple                    
 [2014-03-13 17:33:47] CL Platform 0 version: OpenCL 1.2 (Dec  8 2013 21:07:05)                    
 [2014-03-13 17:33:47] Platform 0 devices: 1                    
 [2014-03-13 17:33:47] 	0	AMD Radeon HD 7950 Compute Engine                    
 [2014-03-13 17:33:47] Unable to load ati adl library                    
 [2014-03-13 17:33:47] Devices detected:                    
 [2014-03-13 17:33:47]  Device (driver=opencl; procs=1)                    
 [2014-03-13 17:33:47] Timers: Using gettimeofday                    
1 devices listed
bash-3.2$

[Raptor2213]

I don't have that folder.  I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7.  Doesn't seem to be a BFGminer issue.

That reply was to a different user.

It's not a MultiMiner issue if BFGMiner is crashing - that's a BFGMiner issue. 2.7.7 is probably passing in different arguments than 2.4. Try doing some trial-and-error (using the Process Log) to figure out which argument is causing the error and report that to the BFGMiner thread. Thanks!

It's just simpler to use 2.4 and hope it's fixed in the new BFGMiner update that they're working on.

[124C41]

I was experiencing crashes after a few hours with 2.7.5 -> 2.7.7 on windows 7
I downgraded my .Net install from version 4.5.1 to 4.5 and it's stable now.
hope this helps.

I don't have that folder.  I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7.  Doesn't seem to be a BFGminer issue.

That reply was to a different user.

It's not a MultiMiner issue if BFGMiner is crashing - that's a BFGMiner issue. 2.7.7 is probably passing in different arguments than 2.4. Try doing some trial-and-error (using the Process Log) to figure out which argument is causing the error and report that to the BFGMiner thread. Thanks!

It's just simpler to use 2.4 and hope it's fixed in the new BFGMiner update that they're working on.

[nwoolls]

Unfortunately same as before; this is the new output after deleting the bfgminer.con file:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D

I think this is actually my bad. Please run the above without --scrypt.

Long-story-short, with the current BFGMiner, --scrypt makes it not scan (some of) your USB devices. This has been addressed (in Git) for the new Scrypt ASICs but is not released yet.

I crossed my streams and released a MultiMiner update that scans with --scrypt, meaning USB ASICs won't be detected unless you are using a PR of BFGMiner or building from Git.

Smells like another hotfix  

Edit: can you give this a try please? Pretty sure this only affects Mac users but would like to get a hotfix out either way:

https://www.dropbox.com/s/kin4rvvewoceb83/MultiMiner-2.7.10.app.zip

[brunosky]

Unfortunately same as before; this is the new output after deleting the bfgminer.con file:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D

I think this is actually my bad. Please run the above without --scrypt.

Hi Nate,
I ran the command line without --scrypt, and this is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto -D
 [2014-03-13 21:29:17] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)                    
 [2014-03-13 21:29:17] Started bfgminer 3.10.0                    
 [2014-03-13 21:29:19] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:064:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:20] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:064:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:22] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:255:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:23] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:255:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:25] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:028:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:028:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:125:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:125:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:029:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:061:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:061:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:093:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:093:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:253:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:253:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] hidapi_try_lib: Successfully loaded libhidapi.dylib                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple LED Cinema Display" serial "170408FB"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Display Audio" serial "FB080417"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Ultrathin Touch Mouse" serial "00-1f-20-97-73-8c"                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:001 (path=(null), vid=05ac, pid=8006, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:125:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:002 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc.         , prod=USB2.0 Hub             , serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:003 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc.         , prod=USB2.0 Hub             , serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:004 (path=(null), vid=05ac, pid=9126, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:007 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc.         , prod=USB2.0 Hub             , serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:011 (path=(null), vid=05ac, pid=1006, manuf=Apple, Inc., prod=Keyboard Hub, serial=000000000000)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF01004200)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF91000200)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:005 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF11004100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:006 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FFC000F000)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:008 (path=(null), vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:010 (path=(null), vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:012 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF30FF01006100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:013 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF40FF20006100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:014 (path=(null), vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:015 (path=(null), vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:002 (path=(null), vid=05ac, pid=8206, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF00005100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF22000100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF51003100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:Bluetooth_046d_b00d_2097738c (path=Bluetooth_046d_b00d_2097738c, vid=046d, pid=b00d, manuf=Unknown, prod=Ultrathin Touch Mouse, serial=00-1f-20-97-73-8c)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_1105_fd334000 (path=USB_05ac_1105_fd334000, vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_9226_fd336000 (path=USB_05ac_9226_fd336000, vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=170408FB)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:15000012 (path=/dev/cu.usbmodem4041, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:13000012 (path=/dev/cu.usbmodemff41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:11000012 (path=/dev/cu.usbmodem1c41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:0b000012 (path=/dev/cu.usbmodemfd341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:09000012 (path=/dev/cu.usbmodemfd511, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:07000012 (path=/dev/cu.usbmodem3d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:05000012 (path=/dev/cu.usbmodem1d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:03000012 (path=/dev/cu.usbmodemfd5311, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:01000012 (path=/dev/cu.usbmodemfd5341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemff41                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem4041                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1c41                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:26] Timers: Using gettimeofday                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem1d21: 2, Twinfury 3259333832391910002400                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem3d21: 2, Twinfury 3259333832391919002000                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5341: 2, Twinfury 3259333832370402001600                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5311: 2, Twinfury 3259333832370310001600                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd341: 2, Twinfury 3259333832391911001400                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd511: 2, Twinfury 325933383239190c000f00                    
 [2014-03-13 21:29:30] Found TBF 0a at /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:30] TBF 0a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 1a at /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:30] TBF 1a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 2a at /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:30] TBF 2a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 3a at /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:30] TBF 3a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 4a at /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:30] TBF 4a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 5a at /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:30] TBF 5a: Init: baud=115200

(At the end I don't see, as usual, "bash-3.2$".)

Long-story-short, with the current BFGMiner, --scrypt makes it not scan (some of) your USB devices. This has been addressed (in Git) for the new Scrypt ASICs but is not released yet.

I crossed my streams and released a MultiMiner update that scans with --scrypt, meaning USB ASICs won't be detected unless you are using a PR of BFGMiner or building from Git.

Smells like another hotfix  

Edit: can you give this a try please? Pretty sure this only affects Mac users but would like to get a hotfix out either way:

https://www.dropbox.com/s/kin4rvvewoceb83/MultiMiner-2.7.10.app.zip

I gave it a try, but unfortunately the same as before: after scanning for hardware, no devices is detected.
I thought that you had a Mac Pro like me, and that you could test MultiMiner with it, but I was wrong.
At the moment I can mine only with command line via Terminal.
Thanks anyway! 

[nwoolls]

I ran the command line without --scrypt, and this is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto -D
 [2014-03-13 21:29:17] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)                    
 [2014-03-13 21:29:17] Started bfgminer 3.10.0                    
 [2014-03-13 21:29:19] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:064:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:20] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:064:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:22] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:255:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:23] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:255:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:25] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:028:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:028:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:125:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:125:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:029:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:061:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:061:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:093:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:093:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:253:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:253:001: LIBUSB_ERROR_OTHER                    
 [2014-03-13 21:29:26] hidapi_try_lib: Successfully loaded libhidapi.dylib                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple LED Cinema Display" serial "170408FB"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Display Audio" serial "FB080417"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"                    
 [2014-03-13 21:29:26] hid_devinfo_scan: Found "Ultrathin Touch Mouse" serial "00-1f-20-97-73-8c"                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:001 (path=(null), vid=05ac, pid=8006, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:125:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:002 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc.         , prod=USB2.0 Hub             , serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:003 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc.         , prod=USB2.0 Hub             , serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:004 (path=(null), vid=05ac, pid=9126, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:007 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc.         , prod=USB2.0 Hub             , serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:011 (path=(null), vid=05ac, pid=1006, manuf=Apple, Inc., prod=Keyboard Hub, serial=000000000000)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF01004200)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF91000200)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:005 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF11004100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:006 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FFC000F000)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:008 (path=(null), vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:010 (path=(null), vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:012 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF30FF01006100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:013 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF40FF20006100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:014 (path=(null), vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:015 (path=(null), vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:002 (path=(null), vid=05ac, pid=8206, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF00005100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF22000100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF51003100)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:Bluetooth_046d_b00d_2097738c (path=Bluetooth_046d_b00d_2097738c, vid=046d, pid=b00d, manuf=Unknown, prod=Ultrathin Touch Mouse, serial=00-1f-20-97-73-8c)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_1105_fd334000 (path=USB_05ac_1105_fd334000, vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_9226_fd336000 (path=USB_05ac_9226_fd336000, vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=170408FB)                    
 [2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:15000012 (path=/dev/cu.usbmodem4041, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:13000012 (path=/dev/cu.usbmodemff41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:11000012 (path=/dev/cu.usbmodem1c41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:0b000012 (path=/dev/cu.usbmodemfd341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:09000012 (path=/dev/cu.usbmodemfd511, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:07000012 (path=/dev/cu.usbmodem3d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:05000012 (path=/dev/cu.usbmodem1d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:03000012 (path=/dev/cu.usbmodemfd5311, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:01000012 (path=/dev/cu.usbmodemfd5341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemff41                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem4041                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1c41                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:26] Timers: Using gettimeofday                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem1d21: 2, Twinfury 3259333832391910002400                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem3d21: 2, Twinfury 3259333832391919002000                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5341: 2, Twinfury 3259333832370402001600                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5311: 2, Twinfury 3259333832370310001600                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd341: 2, Twinfury 3259333832391911001400                    
 [2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd511: 2, Twinfury 325933383239190c000f00                    
 [2014-03-13 21:29:30] Found TBF 0a at /dev/cu.usbmodemfd511                    
 [2014-03-13 21:29:30] TBF 0a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 1a at /dev/cu.usbmodem3d21                    
 [2014-03-13 21:29:30] TBF 1a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 2a at /dev/cu.usbmodemfd5311                    
 [2014-03-13 21:29:30] TBF 2a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 3a at /dev/cu.usbmodemfd5341                    
 [2014-03-13 21:29:30] TBF 3a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 4a at /dev/cu.usbmodem1d21                    
 [2014-03-13 21:29:30] TBF 4a: Init: baud=115200                    
 [2014-03-13 21:29:30] Found TBF 5a at /dev/cu.usbmodemfd341                    
 [2014-03-13 21:29:30] TBF 5a: Init: baud=115200

(At the end I don't see, as usual, "bash-3.2$".)

Can you post the rest of the output please? All of the way down until the next command prompt. Unfortunately this wasn't enough to see what's going wrong.