Dont forget to post a negative trust on Black Arrow, as they have removed all the messages we post ! Any way to contact the admin of the forum ? This firm must clearly be banned from the forum.

Thanks.

Hi guys ! Blackarrow has blacklisted me to put any comment on their threads... They are removing all my messages. Fucking assholes !

Everyone should put messages on their new thread to avoid people buying from them. Thanks.

Michel.

Well, this psychotic monkeys have blocked my access to their forum... The funny story is I do speak fluently Romanian, I have contacted some people in Bucuresti, with all the details of Alex Sovu... Being a convinct reaserched in his country, I am sure they will be very happy to find him ... Jail is what this guy deserves !

Don't worry Alex... Sunt sigur ca iti vor place inchisoara romaneasca ! Craciun Fericit poponar !

Taken from the Blackarrow forum :

"ok all this hard work has gotten somewhere, everyone who got scammed by BLACK ARROW needs to contact these people ASAP!!!!

 

Dear Sir/Madam,

 

I am writing to you as your name and contact details have been passed to Thames Valley Police who are looking into a number of complaints that have been lodged with the National Fraud Intelligence Bureau in the UK in relation to a company called Black Arrow.

 

I should say at the outset that there are a number of ways this matter could proceed. If it is decided that there appears to be sufficient evidence to warrant a criminal investigation then Thames Valley Police will take the matter forward though ultimately it will fall to the Crown Prosecution Service  to determine whether charges should be laid.  If Thames Valley Police consider there is insufficient evidence to investigate this as a potential criminal offence or the CPS fail to authorise criminal charges then you may wish to deal with any losses you feel you have suffered through the civil courts. Thames Valley Police will advise you in due course of the outcome of the enquiries it is currently undertaking.

 

In order for me to consider the matter further I should be grateful if you would let me have a response to the following:

 

1.       What was your understanding of the terms and conditions of the product you were purchasing from Black Arrow?

2.       Do you have a copy of these terms and conditions? If so, please scan and forward these to me.

3.       In simple terms, how did you intend using the product you purchased from Black Arrow?

 

I look forward to hearing from you,

 

Regards,

 

Mark

 

Mark Bennett | Civilian Investigator | Force CID Reading  | Thames Valley Police,

Castle Street, Reading RG1 7TH|  Int - 7516101|  Ext -01189 536101"

As written in BA forum :

FUCK OFF DAVID !

MichelG,

 You have been given a warning by david105396.

 Reason: Spamming
 <div class='callout'>
 ----------------------------------------------------------------------
 Please do not misuse the report functions on this forum.
 ----------------------------------------------------------------------
 </div>

They will probably ban me these motherfuckers !

Hi everybody ! any new about the Peercoin implementation on TREZOR ? I have not seen any new information about it. Would be nice to know if it has been done, currently on development, or if nothing is currently planned.

Thanks.

Another trick from Black Arrow for not refunding their customers ! These psychotic monkeys are thieves, scammers, and incompetent ! Stay away from anything coming from them... Last but not least, their PSU are burning and exploding ...

This kind of firm must be ERASED from the BTC / crypto-currencies world ! They have done too much damages...

Regards!

Yeah ! Psychotic monkeys ! BA should definetely be turned off ! They have hurted too much people with their scam ! And they want war...

Done !

Hey BA ! You removed my post on ecointalk about your behaviour towards your clients !!! Yeah !!! "Asshole detected" ? What about you cocksuckers ?

I understand, but accept the fact that bugs are in the nature of each software ... I do work on encryption devices with smartcards, fingerprints, several encryption protocols... Believe me, a stupid bug can not be seen up to the moment it is discovered by some angry customer ... After that, it is a big chance you found that bug, so they will fix it ... You are the lucky guy ! Try to negociate another Trezor as per compensation (and send it to me ) )

Bugs are normal in the software world ! We find them by using intensively the product, inform the programmers, and wait for a fix ... Does Microsoft sell free bug products ? NO ! Does Linux work without bugs ? NO ! So... Wait for the fix, or apply the workaround !

By the way, I am currently not an owner of a Trezor, but I like the concept and will buy one very soon !

Hi Melech, I installed the same FW on my Ants, and as you said, the temperature increased from 4/5C leaving the S1s at 48/50C @ 2220rpm. I use them to eat my home, and I get a nice 21-22C in the whole house 

Michel

Hi Miners ! I have a problem with the syncro of the blockchain : "No block source available..."

It seems there are no sources available :
connection timeout
trying connection 69.85.86.195:65534 lastseen=90.6hrs

Any IPs or domains where I could connect to get the blockchain ? Thanks
Michel

My .conf :
rpcuser=user
rpcpassword=x
rpcport=65535
rpcallow=127.0.0.1
port=65534
server=1
listen=1
daemon=1
addnode=71.7.130.11
addnode=69.85.86.195
addnode=andarazoroflove.org

Hola, problema resuelto. Hai que poner la WAN y la WWAN en modo DHCP Client. Salvar, y hacer un reboot. Con estas operaciones, el ping me funciona perfectamente.

Gracias por la ayuda.
Michel

Salut à tous ! Merci pour les infos. Après passage en DHCP pour le WAN et WWAN, le problème s'est résôlu.

L'objectif du WIFI est d'éviter d'avoir un contact physique avec le routeur. Je me suis déjà pris un éclair dans la maison qui est rentré par un câble et a fait environ 600€ de dégâts dans l'électroménager.

Donc, si le routeur est toûché, au moins cela se limitera uniquement à lui et à l'alimentation. Le S1 est protêgé par un UPS d'APC. Normalement, lundi je dois recevoir le deuxième S1... Après avoir été massacré par la TVA + frais du transporteur...

A+, Michel

Hi ! I have an issue with my FIRST S1 and I am a little bit lost, as I don't understand why it does not work.

The S1 gets its IP through the WiFi router which is located at home, and the S1 is in a cooler place , the garage. => IP 192.168.1.101
The fixed IP of the S1 on the LAN segment with RJ-45 connector is IP 192.168.1.99
La plage IP du routeur est dans le segment 192.168.1.X/24 donc pas de problèmes.

If I connect the cable between the routeur and the S1 (RJ-45), the pings on .99 and .101 are getting a reply, and work perfectly. I can acces to the configuration page on both IPs.

If I disconnect the cable, no way to get a reply from the pings done on .99 or .101 ... And of course, no way to acces the configuration page. The S1 is minng fine (test phase)... BUT I need to use the WiFi and having the option to access its configuration through a navigator.

Thanks for help and suggestions.
Michel

Hola Mineros ! Tengo un pequeno problema con el S1, y no se por donde bucar.

El S1 recibe su IP via el router WiFi que esta en la casa, el S1 estando mas resquito en el garaje. La IP es la siguiente => IP 192.168.1.101
La IP fija del S1 sobre el conector LAN es IP 192.168.1.99
El segmento IP del router es 192.168.1.X/24 y no hay problemas.

Si conecto el cable en el router y en el S1 (RJ-45), los pings sobre .99 y .101 funcionan perfectamente. Puedo acceder a la pagina de parametros y configurarlos.

Si desconecto el cable, imposible de recibir una respuesta del ping sobre .99 o .101 ... Y por supesto ya no hay manera de acceder a la pagina de configuracion. El S1 mina sin problemas (estoy en fase de pruebas)... Pero me hace falta el WiFi para poder acceder al S1 y a su configuracion.

Gracias a todos por la ayuda.
Cordialemente, Michel

Bonjour à tous, j'ai un souci avec le S1 et je suis un peu perdu, car je ne comprends pas d'où cela peut venir.

Le S1 reçoit son IP via le routeur WiFi qui est dans la maison, et lui se trouve au frais au garage. => IP 192.168.1.101
L'IP fixe du S1 sur le connecteur LAN est IP 192.168.1.99
La plage IP du routeur est dans le segment 192.168.1.X/24 donc pas de problèmes.

Si je connecte le câble sur le routeur et le S1 (RJ-45), les pings sur .99 et .101 fonctionnent parfaitement. Je peux accéder à la page de configuration des paramètres sans problèmes.

Je débranche le câble, impossible de recevoir une réponse du ping sur .99 ou .101 ... Et bien sûr, plus moyen d'accéder à la page de configuration. Le S1 mine sans problèmes (je suis en phase de test)... Mais j'ai un besoin absolu d'utiliser le WiFi et de pouvoir accéder à sa config via un navigateur.

Merci à tous pour les suggestions !
Cordialement, Michel

Hello Miners ! I have been following during several weeks the forum, and it looks very interesting. I was lucky enough to learn several things about BTC and other crypto-currencies.

As I want to experience mining, I ordered some units 2 weeks ago, and now waiting to have them dispatched at home. Currently I do mining with my laptop and his GPU !

Thanks for sharing advices and information.
Have fun !

Michel.