 Show Posts
|
|
Pages: [1]
|
Take a look with the Graft Network it is like VISA and Mastercard in Cryptocurrency wold. already verified partner of Verifone and Ingenico.. and the most important Supernode is in Alpha test and Cold bluetooth storage card will available next month. here is the link : https://www.graft.network/ |
|
|
|
Press any key to continue . . . Ensure there's no pause command in the scripts. My default .bat has a pause at the end, to allow users read error messages, because Windows default shell open and close instantly otherwise. When JCE quits because of the watchdog, it just quits, and doesn't even try to cleanup the VRAM, since it would probably fail in such case. thanks JCE. when miner reconnected to the pool the hashrate drops to 7200 h/s and never get back to 8300 h/s unless restart the miner.. how do i solve this issue? hope this will gone on your next update. |
|
|
|
|
still holding here from ico.. and planning to buy more.BTCBTCBTC
|
|
|
|
Other miners Heavy implementation may be just under your GPU limit and won't crash, we all use a different implementation, I got some reports of opposite behavior from users previously (JCE being more stable than others) and some like you, it really depends on your rig. I agree about hard-copding the tweaks in the bios, i did the same for most of my cards. So far i've no more ideas, maybe the precise combinations of your bios + your drivers + your PSU + jce + CN-Heavy is just not compatible.  when miner reconnected to the pool the hashrate drops to 7200 h/s and never get back to 8300 h/s unless restart the miner.. how do i solve this issue? Easy way: use the 0.32m i'm about to release with the watchdog, and this way, with a safe limit of ~8200, the miner will close by itself in case it happens. I said close so if you want to restart, put a loop in your .bat script :mine
jce_cn_.....
goto :mine
Otherwise i need to restart the warmup in case of long disconnect, and that's code i must do my side. Note that the 0.32m will start a bit faster than the previous versions, I improved the init sequence. edit: 0.32m GPU onlinebetter watchdog
better support of 64+ cpu
CN-Red
Lots of new shitcoins
--no-warmup
I used 0.032m with watchdog enable and make a loop, but when watchdog triggered it says "Press any key to continue . . ." so it is not quitting automatically. tia |
|
|
|
hey JCE, I have 8pcs rx 580 8gb with the total hash of 8300 h/s "Auto config", i noticed that when miner reconnected to the pool the hashrate drops to 7200 h/s and never get back to 8300 h/s unless restart the miner.. how do i solve this issue? thank a lot for this apps, really good hash / card.   |
|
|
|
yes, need to disable the OverdiveNtool Pstate from p1 to p6, To do this click on P0, P1.. etc. label. and i think this also related to my problem no.2, i will observe for 24 hrs and give feedback here asap..
Your problem n2, there is info in the logs when hashing speed is 0, so you CAN identify the card that crashed. okay, but did not see anything like that in the logs. my rig goes into bluescreen, i think this kind of issue is related to the Overdriventool. so far 6 hours running with thesame settings.. |
|
|
|
hello @doktor83,
1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.
2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.
I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...
thank in advance.
I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail. So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems. Using 1.6.0 on 12 rx580 rigs without problems mining haven. You dont have any thesame problem? what is your driver version? what tool you use to undervolt? I have no problems at all. Using win 10 x64 ver 1703 Blockchain drivers OverdriveNtool for undervolting And its not doing anything with the voltage on pool connections  what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way.. Ifound solution on my problem n0. 1... tnx to Google Search!!! Voltage reset? Mind to share what did you do, maybe someone else has the same problem. yes, need to disable the OverdiveNtool Pstate from p1 to p6, To do this click on P0, P1.. etc. label. and i think this also related to my problem no.2, i will observe for 24 hrs and give feedback here asap.. |
|
|
|
hello @doktor83,
1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.
2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.
I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...
thank in advance.
I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail. So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems. Using 1.6.0 on 12 rx580 rigs without problems mining haven. You dont have any thesame problem? what is your driver version? what tool you use to undervolt? I have no problems at all. Using win 10 x64 ver 1703 Blockchain drivers OverdriveNtool for undervolting And its not doing anything with the voltage on pool connections what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way.. Ifound solution on my problem n0. 1... tnx to Google Search!!! |
|
|
|
hello @doktor83,
1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.
2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.
I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...
thank in advance.
I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail. So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems. Using 1.6.0 on 12 rx580 rigs without problems mining haven. You dont have any thesame problem? what is your driver version? what tool you use to undervolt? I have no problems at all. Using win 10 x64 ver 1703 Blockchain drivers OverdriveNtool for undervolting And its not doing anything with the voltage on pool connections what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way.. |
|
|
|
hello @doktor83,
1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.
2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.
I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...
thank in advance.
I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail. So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems. Using 1.6.0 on 12 rx580 rigs without problems mining haven. You dont have any thesame problem? what is your driver version? what tool you use to undervolt? |
|
|
|
|
hello @doktor83,
1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.
2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.
I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...
thank in advance.
|
|
|
|
|
