SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching

[dingdongtobias]

Is SRBminer showing higher hash rate than reality? I understand that the hash rate reported on pool's webpage is only an estimate. But still, I only have 24 hr hash rate fluctuating between 6.5k ~ 6.9k for the past week, all while SRBminer reporting a steady ~1850 hash/s for each 4 of my vega 56 throughout the same period. 

I have in total 70500 hash/s but in the pools show 58-70, lot less too

you should try it on a other pool, or try other miner on supportxmr for the same period.

[1713504203]

1713504203

[twotwosix]

Is SRBminer showing higher hash rate than reality? I understand that the hash rate reported on pool's webpage is only an estimate. But still, I only have 24 hr hash rate fluctuating between 6.5k ~ 6.9k for the past week, all while SRBminer reporting a steady ~1850 hash/s for each 4 of my vega 56 throughout the same period. 

I have in total 70500 hash/s but in the pools show 58-70, lot less too

you should try it on a other pool, or try other miner on supportxmr for the same period.

Tried srbminer 1.4.2 with imagreedybastard Mode activated (no fee) and works fine. Im confused

[Mashy81]

I have found 1.5.8 faster than 1.6.0.
Main reason is I am able to run higher clocks more stable on the older version. Not sure why this is! Just for info for anyone else.
Rx550   520hs - 1.5.8    490hs - 1.6.0
Rx570   1015hs - 1.5.8    980hs - 1.6.0
Vega56   1970hs - 1.5.8   1850hs  - 1.6.0

[danskin]

Is SRBminer showing higher hash rate than reality? I understand that the hash rate reported on pool's webpage is only an estimate. But still, I only have 24 hr hash rate fluctuating between 6.5k ~ 6.9k for the past week, all while SRBminer reporting a steady ~1850 hash/s for each 4 of my vega 56 throughout the same period. 

I have in total 70500 hash/s but in the pools show 58-70, lot less too

you should try it on a other pool, or try other miner on supportxmr for the same period.

Tried srbminer 1.4.2 with imagreedybastard Mode activated (no fee) and works fine. Im confused

new to SRB, what does the imagreedybastard do?

[heavyarms1912]

Is SRBminer showing higher hash rate than reality? I understand that the hash rate reported on pool's webpage is only an estimate. But still, I only have 24 hr hash rate fluctuating between 6.5k ~ 6.9k for the past week, all while SRBminer reporting a steady ~1850 hash/s for each 4 of my vega 56 throughout the same period.  

I have in total 70500 hash/s but in the pools show 58-70, lot less too

you should try it on a other pool, or try other miner on supportxmr for the same period.

Tried srbminer 1.4.2 with imagreedybastard Mode activated (no fee) and works fine. Im confused

new to SRB, what does the imagreedybastard do?

you become what it says. . 
jk. It removed the dev fee.

[meihk]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

[rednoW]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

[dingdongtobias]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

[hesido]

Doktor has been silent for a while. Hope everything's fine!

[meihk]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

[zeef]

Hi,

How can i use SRBPolaris-CN.exe --listdevices  ? any example ?

Thanks

[dingdongtobias]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

I have no problems at all.
Using win 10 x64 ver 1703
Blockchain drivers
OverdriveNtool for undervolting

And its not doing anything with the voltage on pool connections

[meihk]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

I have no problems at all.
Using win 10 x64 ver 1703
Blockchain drivers
OverdriveNtool for undervolting

And its not doing anything with the voltage on pool connections

what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way..

[Ballscack]

can anyone give me a link for the V1.4.3 of srbminer?

[doktor83]

Doktor has been silent for a while. Hope everything's fine!

Yes, i am fine, just too busy lately, thanks for worrying

[meihk]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

I have no problems at all.
Using win 10 x64 ver 1703
Blockchain drivers
OverdriveNtool for undervolting

And its not doing anything with the voltage on pool connections

what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way..

Ifound solution on my problem n0. 1... tnx to Google Search!!!

[dingdongtobias]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

I have no problems at all.
Using win 10 x64 ver 1703
Blockchain drivers
OverdriveNtool for undervolting

And its not doing anything with the voltage on pool connections

what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way..

Ifound solution on my problem n0. 1... tnx to Google Search!!!

Voltage reset? Mind to share what did you do, maybe someone else has the same problem.

[meihk]

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

I have no problems at all.
Using win 10 x64 ver 1703
Blockchain drivers
OverdriveNtool for undervolting

And its not doing anything with the voltage on pool connections

what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way..

Ifound solution on my problem n0. 1... tnx to Google Search!!!

Voltage reset? Mind to share what did you do, maybe someone else has the same problem.

yes, need to disable the OverdiveNtool Pstate from p1 to p6, To do this click on P0, P1.. etc. label. and i think this also related to my problem no.2, i will observe for 24 hrs and give feedback here asap..

[dingdongtobias]

yes, need to disable the OverdiveNtool Pstate from p1 to p6, To do this click on P0, P1.. etc. label. and i think this also related to my problem no.2, i will observe for 24 hrs and give feedback here asap..

Your problem n2, there is info in the logs when hashing speed is 0, so you CAN identify the card that crashed.

[DStefanov]

Hi,

Please give a config.txt file for AMD RX280X!
Thanks