Show Posts
|
Pages: [1] 2 3 »
|
Congrats on ROI! now time to make add'l profits!
|
|
|
Each manufacturer is different, Asus only honors in that country you purchsaed from, so if you have a warranty issue you'd have to ship it back to that countries RMA site.
|
|
|
Does the kernel value determine the number of shares submitted per minute?
Think of it as 8 different programs in one. With different properties and strenghts, some are good on old cards, some are good on new cards. --kernel 0-2 are similar to lolminer, trex and gminer, 3-4 claymore-phoenix miner, and 5-7 Team black v1.00-v1.15. Written from scratch. Team black is a team of opensource developers, and the work on the newest LHR kernels might be opensourced. I'm running rtx 3080 now on the 1.17 with intensity of 200.
Your coreclock in too low. Run the program as admin and use --lock-cclock [1200,1200], then --lock-cclock [1300,1300] .. With autotune it will look something like this: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2Ft4ym2j9%2Fauto-tune.jpg&t=662&c=FM3yYgSFDCTdOw) Took wrong screen shot and I removed it... I did have 2 questions though: 1. How do I check what Kernel it's using after it's been hashing for a while? 2. I locked core at 1100, but it still jumps around alot down to 975 and up to 1100. let me try 1200.
|
|
|
I did not specify a kernel speed as I was allowing the miner to select the best one.
Depends on the tdp(power), intensity, memory type and clocks. start it a few times and see what number is the best for the card. How can we see what kernel is being used? I'm running rtx 3080 now on the 1.17 with intensity of 200. So far soo good! Getting 101 MH at lock clock of 1100, After burner at 67%, VRAM temps sitting nicely at 90 with 80% fan speed. I had to delete the original image, looks like it dipped.
|
|
|
Just want to say thanks for getting this going. I've been running 1.1 for a while now, I've tried all version past 1.1 and it get tons more stale shares, with no changes to my clocks. https://imgur.com/a/bbGToIcThink I'll be sticking with the 1.1. my settings are 66% PL, +1250 Mem, -150 clock and 80% fan speeds.
|
|
|
I'm still testing , but this miner is giving me increased hashrates. Originally i also had alot more stale shares on ethermine.
Lowered xintensity to 48 and stale shares are almost non-existent now.
I'm running 1.09 right now.
|
|
|
Sorry if this was already suggested, I didn't go back. But you have Compute mode turned on? Usually that's the culprit for those low MH you are showing. are both cards bios modded or not, what drivers are you using and please, copypaste here the bat file into the
cmd /K start /B EthDcrMiner64.exe -epool eu.sparkpool.com:3333 -ewal 0xd79745d8e38d6cE337956a7c57f7C9d343ae7057 -eworker NOM_DU_WORKER -epsw x pause Yes modded with ATIFlash_284 and PolarisBiosEditorMaster pilote: 24.20.11016.4 bios is BIOS Part Number 113-2E366FU-O53 Core Clock 1340 MHz
|
|
|
The Zcash nethash has increased crazy amounts in the last 7 days.... my 1 Z9 mini was making .6 coins beginning of the week and now returning .4 coins... There was a slow reduction since I got it in June, but the last 1.5 weeks, the decrease in returns have increased significantly.
Your z9 mini uses algorithm "Equihash" and a number of coins use that algorithm. If you bought your z9 mini just to mine Zcash(ZEC) and hodl that single coin you are out of luck, I guess. I, myself, use multiswitching(switching between different coins that all use Equihash algorithm) when mining and in my case have what I mine exchange to Bitcoin(BTC) and Litecoin(LTC) and then I choose to hodl BTC and LTC. I use prohashing.com as miningpool with nanopool(ZEC into a wallet and autoexchange to BTC) and MPH(Multiswitch and autoexchange to BTC) as backup miningpools. You can use whichever miningpools you choose. You can also choose to mine to a wallet/exchange where you yourself can exchange to other coins/Fiat-money (£, $, €) you find attractive or best price. All info about this can be found in this forum and on the Internet. Good luck! Not talking about coin value in my post. Was only talking about daily coin mined and the significant jump in hashrates causing less daily returns this week. Whether is ZEC, ZEN, ZCL or whatever Equihash coin is out there, this week, the amount of daily coin return has dropped by 20-30% from what I see. I was using Zcash as an example, the same can be seen across the other coins.
|
|
|
The Zcash nethash has increased crazy amounts in the last 7 days.... my 1 Z9 mini was making .6 coins beginning of the week and now returning .4 coins... There was a slow reduction since I got it in June, but the last 1.5 weeks, the decrease in returns have increased significantly.
|
|
|
it took some time since I was in game, Is it still possible to mine ethereum on gtx 1060 3 gb ? Im still getting an error with DAG size.
Unless you are mining ETH for some ideological reasons, it would be more profitable for you to mine something else, e.g. BTG, with autoexchange to ETH. And no need to switch to win 7 or linux. are you referring to any particular auto-switching mining platform or just setting to mine BTG in the .bat file? It seems like a lot of work to have to switch to what is doing best each week and nobody knows if BTG will sustain at a higher earning ratio than ETH. I do hope you can correct me here though... He's probably referring to mining BTG at Miningpoolhub and do autoexchange to Eth.
|
|
|
Same here, when I was trying to track it, the autoswitch returned less. ALot also had to deal with market prices of the alts as well.... it just wasn't as effective as I'd hoped. So i just stuck to 1 currency. I left MPH yesterday and moved to Flypool. When Nanopool opened today, I switched over to them. I'm not completely sure why my profits were lower on MPH, but I have some suggestions.
Firstly, it seems that MPH systematically overestimates ZEN value compared to whattomine. So, MPH will choose to mine ZEN more often than it "should". Secondly, there is an extra fee for auto-exchange, that I use. It's only 0.2%, but it's not zero. Thirdly, as for all switch-mining, in the time it takes to mine, confirm, transfer and exchange, the price of the coin may have fallen. Lastly, the switch algorithm itself may be a culprit. MPH seems to continuously check which coin is the most profitable, but it won't switch until it finds a block of whatever it is mining at the moment. I think this is done to offset the penalty imposed due to the PPLNS payout scheme. But it has a serious backside. If a coin that MPH mines suddenly gets a big difficulty spike, it won't switch until a block is found, no matter what. I've seen my own miners churning away on a high difficulty ZEC for a couple of hours even when ZEC was at the bottom of the whattomine list.
My theory is that the autoswitch pool is so big on MPH it actually "moves the market". As soon as MPH identifies a currency for the autoswitchers to move to, about 10MH+ switch to the new currency and spike difficulty just from their move alone. So the currency from which the autoswitchers moved sees a difficulty drop and those mining that currency still get the benefit. Just a theory, but I found autoswitch wasn't as good as dedicating to one currency which was consistently overperforming on WTM over the last 24-48hrs.
|
|
|
This is roughly where I'm at, also... as of 3 days ago, 45.86% recovered with 12 running. If I were to include the misc. costs for housing them, venting them, getting air to them, etc. it would probably be closer to 38-40%. Are you basing this off Fiat valuation or crypto valuation?
|
|
|
can someone please tell me how lout this miner is? curious is the fact that in the mini version they write the level of noise the miner is making. i also would like to know for the z9
It's not quiet by normal standards, it's quiet for an ASIC, but if you compare it to GPU miners, this thing is loud. I'd say that it runs about 3x louder than my 9x GPU rig due to the hi speed fans. It's about the same audio as a server PSU running near full speed.
|
|
|
Daily profit?
Z9 Mini @ 650-overclock hovers around 14k and 370w-from-the-wall - shows +-$14/day on WhatToMine, now. If Batch-2 start shipping in 2 days... and say some Batch-2 owners paid about $800 ($850, minus $250 coupon, plus PSU, plus shipping = $800'ish)... could mean a 2-month ROI. Say 3 months with price-drops/diff-increases. So Batch-2 Minis should easily pay for themselves by Christmas. I don't know about that, I mean, think about how much you were making when the Z9 mini first dropped on batch 1 or when you received it, compared to what you are getting now. NOT looking at $$$ value (ignoring the market price fluctuation), but in the 2 months since i've had it (June 22nd). the Zen cash daily returns have dropped from 1.4 down to .8. So that's about a 40% drop in returns in 2 months. Though the major drop occured when the Inno A9s came online.
|
|
|
So frustrating... watching the alt market die when i've had my Zclassic coins on the exchange for the last 7 days and no movement.... though i only have a few Zcl coins... it is still very annoying seeing myself lose 40% value.
It has been a pretty bad week or two in the alts (and BTC) market, but don't panic, hodl for the long term, there are lots of institutes slowly embracing BTC - give it a few months and it will rise again. I know but I've been trying to autoexchange the ZCL into BTC before this last dump... based on a ZCL/BTC i'm down 40% not to fiat, just saying had this ZCL transfer gone into action 7 days ago, i'd be a happier person... as of today it's 9 days and still sitting on the exchange.
|
|
|
So frustrating... watching the alt market die when i've had my Zclassic coins on the exchange for the last 7 days and no movement.... though i only have a few Zcl coins... it is still very annoying seeing myself lose 40% value.
|
|
|
I am still mining with mph , but not for long. The auto exchange is not working as it should and the coins have been stuck for 3days +.
Mine is still in the auto exchange wallet but not on the actual exchange, it's been about 3-4 days stuck like that.
|
|
|
2 days and still all BTG are "on exchange" wallet. Its time to change pool...
Same problem here for ZCL, so i stopped mining it on MPH.
|
|
|
WHat's up with the ZCL exchange? it's been 3 days and my ZCL have been sitting on auto exchange wallet but not actually going on the exchange.
|
|
|
Update on my Z9 Mini profits. The block reward to miners was cut a a little over a week ago so that has some impact. Date------ | Zen/Day | 27-Jun | 1.3032 | 28-Jun | 1.3603 | 29-Jun | 1.383 | 30-Jun | 1.4762 | 1-Jul | 1.5212 | 2-Jul | 1.4962 | 3-Jul | 1.4312 | 4-Jul | 1.4921 | 5-Jul | 1.5317 | 6-Jul | 1.5048 | 7-Jul | 1.4721 | 8-Jul | 1.442 | 9-Jul | 1.4814 | 10-Jul | 1.4773 | 11-Jul | 1.4066 | 12-Jul | 1.3858 | 13-Jul | 1.3414 | 14-Jul | 1.3097 | 15-Jul | 1.3306 | 16-Jul | 1.2652 | 17-Jul | 1.2555 | 18-Jul | 1.2519 | 19-Jul | 1.212 | 20-Jul | 1.1556 | 21-Jul | 1.1875 | 22-Jul | 1.1621 | 23-Jul | 1.1512 | 24-Jul | 1.1499 | 25-Jul | 1.1476 | 26-Jul | 1.1198 | 27-Jul | 1.1472 | 28-Jul | 1.1019 | 29-Jul | 1.0783 | 30-Jul | 1.0631 |
Wow, look at that stead decrease though, as more of the innosilicon miners come online, i can imagine that dropping more.
|
|
|
|