Latest posts of: Matthew

Show Posts
Pages: [1] 2 »

Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] Nanominer v1.5.2:Ethash,CryptoNight (v6,v7,v8,R,RW), RandomHash,Cuckaroo29

on: July 24, 2019, 08:59:15 AM

Quote from: Anthony42 on July 22, 2019, 03:57:55 AM Adrenalin 2019 Edition 19.7.2 try? Yes, we tried that. Unfortunately no improvements. Hopefully, the next drivers will boost the performance.

Alternate cryptocurrencies / Mining (Altcoins) / Re: [ANN] Nanominer v1.5.2:Ethash,CryptoNight (v6,v7,v8,R,RW), RandomHash,Cuckaroo29

on: July 24, 2019, 08:57:23 AM

Quote from: karim_hassan777 on July 22, 2019, 03:31:27 AM hi gurs what is the hashrate of rx 5700 xt with the last version ? Hey! We got 3.5 MH/s 5700 XT (stock settings). No improvements so far. Looking forward to the next driver version.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.7 (Windows/Linux)

on: July 19, 2019, 11:03:16 PM

Hey guys, I would like the dev team to confirm that Claymore does not mine PascalCoin (RandomHash algo) any longer (cannot find it anywhere). There are people that think Claymore is still capable of mining PascalCoin and blame mining pools when they don't see results at their accounts. Thanks in advance!

Alternate cryptocurrencies / Pools (Altcoins) / Re: [ETH] [ETN] [SIA] [ETC] [ZEC] [XMR] [PASC] Nanopool. Stable pool with great UI

on: June 19, 2019, 02:01:22 PM

Hey everyone! We have updated Nanopool's help page: https://help.nanopool.org Make sure to check it out!

Alternate cryptocurrencies / Pools (Altcoins) / Re: [ETH] [ETN] [SIA] [ETC] [ZEC] [XMR] [PASC] Nanopool. Stable pool with great UI

on: June 04, 2019, 07:23:55 AM

Quote from: cryptomaxsun on June 01, 2019, 04:04:26 PM Hello! I mining ETC, the shares are uneven, it happens to be an interval of 20-30 minutes. Is it because of the difficulty of one shares? Can it be reduced for evenness of shares? Hello! Yes, that is correct. We provide high difficulty shares, therefore a number of submitted shares vary. Unfortunately the share difficulty cannot be reduced. However there's no need to worry as in the long run, your revenue will be what it should be. It's because not only share difficulty is higher but its price too.

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Grin | PoW Mining | Electronic transactions for all. Community driven.

on: February 07, 2019, 10:35:18 AM

Hello there, Nanopool has recently launched GRIN mining pool (Cuckaroo-29) with 0% fee while beta. Pool features * Fee - 0% (while beta)  * Payouts - a few times a day  * Payout fee - 0.0005 Grin  * Default minimum payout - 1 Grin  * Payout scheme - PPLNS  * Website: https://grin29.nanopool.org

Alternate cryptocurrencies / Pools (Altcoins) / Re: [ETH] [ETN] [SIA] [ETC] [ZEC] [XMR] [PASC] Nanopool. Stable pool with great UI

on: February 07, 2019, 10:29:13 AM

Quote from: Mapuo on February 07, 2019, 07:33:42 AM Hi, bitmesh.com isn't in your list with exchanges. Can we use it for UID for grin pool? Hi there, You can use any valid GRIN address. Our exchange list is just recommended exchanges.

Alternate cryptocurrencies / Pools (Altcoins) / Re: [ETH] [ETN] [SIA] [ETC] [ZEC] [XMR] [PASC] Nanopool. Stable pool with great UI

on: February 06, 2019, 12:34:28 PM

Hey, We've just launched Grin coin mining pool (Cuckaroo-29) and I'd like you to join us. The pool is currently in beta test and while that its fee is 0%. Pool features * Fee is 0% (while beta)  * Payouts occur a few times a day  * Payout fee is 0.0005 Grin  * Default minimum payout is 1 Grin  * Payout scheme is PPLNS  * Website: https://grin29.nanopool.org  Make sure you don't miss out on the 0% pool fee. And if you have any questions, feel free to message me.

Alternate cryptocurrencies / Pools (Altcoins) / Re: [ETH] [ETN] [SIA] [ETC] [ZEC] [XMR] [PASC] Nanopool. Stable pool with great UI

on: December 01, 2018, 04:29:15 PM

Hi everyone! Nanopool has just launched RavenCoin mining pool. Be sure to check it out. Pool features * Fee is 0% while beta * Payouts several times a day * Payout commission is 0.0005 RVN * Customizable payout threshold. Default limit is 100 RVN, minimum is 50 RVN * Share difficulty is static and equal to 20 * PPLNS time frame is 12 hours https://rvn.nanopool.org

Alternate cryptocurrencies / Announcements (Altcoins) / Re: [ANN] Ravencoin [RVN] PoW GPU Mining | Asset Transfer Blockchain (Updated ANN)

on: December 01, 2018, 01:20:03 PM

Hi guys, This is Matthew from Nanopool. We have just launched RavenCoin mining pool and I would really appreciated if you help me in adding our pool to your RavenCoin mining pools list. Pool address - https://rvn.nanopool.org Pool features * Pool fee is 0% while beta * Payouts several times a day * Payout commission is 0.0005 RVN * Default payout limit is 100 RVN * Customizable payout threshold that can be lowered to 50 RVN * Share difficulty is static and equal to 20 * Email notification system * PPLNS payout scheme, where N is defined as all submitted shares during the last 12 hours Location Server Host Stratum Port Asia rvn-asia1.nanopool.org 12222 Australia rvn-au1.nanopool.org 12222 Europe rvn-eu1.nanopool.org 12222 Europe rvn-eu2.nanopool.org 12222 Japan rvn-jp1.nanopool.org 12222 US East rvn-us-east1.nanopool.org 12222 US West rvn-us-west1.nanopool.org 12222 Thanks in advance!

Alternate cryptocurrencies / Mining (Altcoins) / Re: How to stop emails from nanopool.org: "XMR: Your workers has gone offline"

on: October 26, 2018, 10:12:38 AM

Quote from: dd2017 on October 23, 2018, 05:15:02 PM Quote from: Matthew_Nanopool on October 23, 2018, 12:49:25 PM The thing is that Nanopool is optimized for multi GPU/CPU RIGs, that means while mining with a single GPU/CPU or low-efficient one, you'll receive a false-positive notification each time your miner does not manage to send a valid share to the pool for 20 minutes. If this is the case, you can simply replace your email in the miner configuration with a passphrase that will be your new password for your account settings. I hope this helps! Thanks. I got it now. The email was in my command line that I supplied for the miner. I wish they explained it in a more clear form on the website. That is right. I can assure they are working on many improvements now. And one of them is a new, clear FAQ section.

Alternate cryptocurrencies / Mining (Altcoins) / Re: How to stop emails from nanopool.org: "XMR: Your workers has gone offline"

on: October 23, 2018, 12:49:25 PM

The thing is that Nanopool is optimized for multi GPU/CPU RIGs, that means while mining with a single GPU/CPU or low-efficient one, you'll receive a false-positive notification each time your miner does not manage to send a valid share to the pool for 20 minutes. If this is the case, you can simply replace your email in the miner configuration with a passphrase that will be your new password for your account settings. I hope this helps!

Alternate cryptocurrencies / Pools (Altcoins) / Re: 27 day test shows Minerall.io is15% more profitable than 2Miners to mine ETH

on: July 31, 2018, 12:50:25 PM

Quote from: lamboholic on July 27, 2018, 08:33:25 AM Hi community, New test as promised. Now its Minerall.io vs. NanoPool https://minerall.io/minerstats/0x72a5c922ade85b799664347e50dd0acdd838c14a 0.0913 ETH https://eth.nanopool.org/account/0x72a5c922ade85b799664347e50dd0acdd838c14a 0.06234010 ETH Minerall stats NanoPoll stats Of course, everything depends on a pool luck rate. The Minerall's pool started worse, but then managed to catch up and overtake NanoPool. The test is now finished. Any suggestion which pools to compare next? Hi there, You have to also take into account your Average and Last reported hash-rate discrepancy on Nanopool. According to the screenshot you attached, your 6 hour Average H/s was 119.4 whereas your Last reported H/s was 186 (see your Nanopool account). Basically instead of getting paid for your actual hash-rate, you were getting for 119.4 only, which was the reason, I guess, why you got less. PS: Your Last reported and Average hash-rate have to be close to each other, otherwise there is something wrong (10% discrepancy is acceptable).

Alternate cryptocurrencies / Pools (Altcoins) / Re: Nanopool steals founded blocks

on: June 13, 2018, 01:26:55 PM

Quote from: Ystss on June 07, 2018, 06:57:15 AM After the fork the difficulty abruptly dropped on electroneum and tons of people started to mine it. When difficulty dropped to the bottom the blocks suddenly couldn’t be found at about 23.42. At the same time the power of the pool went up to 53mx at the peak, everyone bought orders on nicehash. New blocks couldn’t be found for about an hour but the net was fine. Just a food for thought, make your own conclusions... Hey guys, Due to the issue we had, basically Electroneum wallet started rejecting all the blocks that Nanopool submitted right after the ANTI-ASIC fork. Thus we had to submit empty blocks while were cooperating with ETN team in order to get the block rejection issue fixed as soon as possible.

Alternate cryptocurrencies / Mining (Altcoins) / Re: CUDA error 11 - cannot allocate big buffer for dag. Virtual Memory set 16384MB

on: June 01, 2018, 01:29:54 PM

Quote from: PigHead19 on May 26, 2018, 07:58:20 PM ETH: 1 pool is specified Main Ethereum pool is eth-eu.dwarfpool.com:8008 PASC: 1 pool is specified Main Pascal pool is pasc-eu1.nanopool.org:15555 AMD OpenCL platform not found Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU CUDA initializing... NVIDIA Cards available: 7 CUDA Driver Version/Runtime Version: 9.2/8.0 GPU #0: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 1:0:0) GPU #1: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 2:0:0) GPU #2: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 3:0:0) GPU #3: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 4:0:0) GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 12:0:0) GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 13:0:0) GPU #6: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1 (pci bus 14:0:0) Total cards: 7 ETH: Stratum - connecting to 'eth-eu.dwarfpool.com' <91.134.112.222> port 8008 (unsecure) DUAL MINING MODE ENABLED: ETHEREUM+PASCAL ETH: eth-proxy stratum mode Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333 PASC: Stratum - connecting to 'pasc-eu1.nanopool.org' <164.132.108.171> port 15555 (unsecure) ETH: Stratum - Connected (eth-eu.dwarfpool.com:8008) (unsecure) PASC: Stratum - Connected (pasc-eu1.nanopool.org:15555) (unsecure) ETH: Authorized Setting DAG epoch #189... PASC: Authorized PASC: 05/27/18-03:53:47 - New job from pasc-eu1.nanopool.org:15555 PASC: 05/27/18-03:53:49 - New job from pasc-eu1.nanopool.org:15555 Setting DAG epoch #189 for GPU6 Setting DAG epoch #189 for GPU4 Setting DAG epoch #189 for GPU1 Setting DAG epoch #189 for GPU0 Setting DAG epoch #189 for GPU2 Setting DAG epoch #189 for GPU5 Setting DAG epoch #189 for GPU3 Create GPU buffer for GPU6 Create GPU buffer for GPU5 Create GPU buffer for GPU2 Create GPU buffer for GPU0 Create GPU buffer for GPU1 Create GPU buffer for GPU4 Create GPU buffer for GPU3 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions. CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions. Setting DAG epoch #189 for GPU4 GPU 4 failed GPU 4, CUDA error 11 - cannot write buffer for DAG Setting DAG epoch #189 for GPU5 GPU 5 failed GPU 5, CUDA error 11 - cannot write buffer for DAG ETH: 05/27/18-03:53:54 - New job from eth-eu.dwarfpool.com:8008 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s GPU 4 failed GPU 5 failed GPU2 DAG creation time - 6752 ms Setting DAG epoch #189 for GPU2 done GPU1 DAG creation time - 6774 ms GPU3 DAG creation time - 6765 ms PASC: 05/27/18-03:54:03 - New job from pasc-eu1.nanopool.org:15555 Setting DAG epoch #189 for GPU1 done GPU6 DAG creation time - 6782 ms Setting DAG epoch #189 for GPU3 done ETH: 05/27/18-03:54:03 - New job from eth-eu.dwarfpool.com:8008 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s GPU0 DAG creation time - 7460 ms Setting DAG epoch #189 for GPU6 done Setting DAG epoch #189 for GPU0 done ETH: 05/27/18-03:54:10 - New job from eth-eu.dwarfpool.com:8008 GPU0 t=66C fan=38%, GPU1 t=70C fan=29%, GPU2 t=66C fan=30%, GPU3 t=69C fan=58%, GPU4 t=52C fan=3%, GPU5 t=57C fan=22%, GPU6 t=68C fan=37% WATCHDOG: GPU error, you need to restart miner ETH - Total Speed: 150.902 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 30.180 Mh/s, GPU1 30.206 Mh/s, GPU2 30.222 Mh/s, GPU3 30.201 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 30.092 Mh/s PASC - Total Speed: 1509.013 Mh/s, Total Shares: 0, Rejected: 0 PASC: GPU0 301.795 Mh/s, GPU1 302.057 Mh/s, GPU2 302.224 Mh/s, GPU3 302.013 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 300.924 Mh/s Quit, please wait... Hi there, First of try to increase your virtual memory to 32 GB and/or specify “-eres” parameter at the end of your miner configuration .bat file.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Nanopool Monero

on: June 01, 2018, 01:13:12 PM

Quote from: carlosmonaco on May 30, 2018, 08:28:40 AM Hello, I have some issues using nanopool recently. I have 40kh/s and estimated earnings are usualy 9.5 XMR per Month, but now I'm around 6 XMR per month. Only 128 blocks found the last 24 hours on nanopool but with the total hashrate this should be around 200 blocks. Is it really bad luck or something else? Hello there, There was a minor issue with the calculator that has been already fixed. It has to be said that the issue had no effect on your income. The calculator estimated profit should be more accurate by now. However we are doing our back-end server check just in case, which has not revealed any flaws so far.

Alternate cryptocurrencies / Mining (Altcoins) / Re: How to get a pascal coin account/private key?

on: May 25, 2018, 10:17:57 AM

Quote from: TSN11 on May 24, 2018, 10:47:25 PM I'm trying to figure out how to register an PASC account. I downloaded the latest Pascal coin wallet, and generated a public key. Any advise on how to get a private key (I want a local account, not exchange account), so I'll be able to start mining in nanopool. I tried to get a private key from "Discord" (#free-pasa-bot channel), but it didn't work. Can somebody give me an advise on how to get it? My public key - 3GhhbomUFyyDvVr16RMGxeK9bZBfPmgWeTSnVZ1RbiJ4TeQ68Nv81vaihbtBKcW8s8yJ8UeB3MUJp4K kZoyPsQNCtBh4iSAnx3vACF Thank you! Hi there, You can basically do what is mentioned above: Start mining to Poloniex account, set your Public Key in the Nanopool account settings. As soon as 20 coins are paid to you out, you'll receive PASA along with the next payout. Then you can go ahead and switch your mining to the PASA you got. You can also request me for a free PASA by sending me your Public Key at the email down the main Nanopool page. However keep in mind free PASA request takes up to 10 days to be reviewed, so it might be faster to start with Poloniex.

Alternate cryptocurrencies / Mining (Altcoins) / Re: the best mining pool

on: May 17, 2018, 11:17:51 AM

Quote from: woagha on May 11, 2018, 04:52:04 PM I am looking for the best mining pool. why since 3 days dedpool does not pay? Hi, Please do not hesitate to let me know if you have any questions or concerns regarding Nanopool, or if you need some clarification on any issues, I’ll be happy to help.

Alternate cryptocurrencies / Mining (Altcoins) / Re: Claymore dose't work

on: May 17, 2018, 11:07:41 AM

Quote from: siribest on May 10, 2018, 12:56:26 PM I just new to mining btc Ican't run claymore I don't know why C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>setx GPU_FORCE_64BIT_PTR 0 SUCCESS: Specified value was saved. C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>setx GPU_MAX_HEAP_SIZE 100 SUCCESS: Specified value was saved. C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>setx GPU_USE_SYNC_OBJECTS 1 SUCCESS: Specified value was saved. C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>setx GPU_MAX_ALLOC_PERCENT 100 SUCCESS: Specified value was saved. C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>setx GPU_SINGLE_ALLOC_PERCENT 100 SUCCESS: Specified value was saved. C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal 0x1056178d37384FdeBcb6FFc2134b7597A354E1EB.Test/best_w2@hotmail.com -epsw x -mode 1 -ftime 10 ╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual GPU Miner - v11.2 ║ ║ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ║ ╚════════════════════════════════════════════════════════════════╝ ETH: 1 pool is specified Main Ethereum pool is eth-asia1.nanopool.org:9999 C:\Users\best_\Desktop\Desktop\Bit\New folder\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.2>pause Press any key to continue . . . This is what it show setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal 0x1056178d37384FdeBcb6FFc2134b7597A354E1EB.Test -epsw x -mode 1 -ftime 10 pause thsi my code Hi, If you still did not get it working, feel free to provide me with your current claymore configuration as well as with its recent log file. I'll take a look into that for you.

Alternate cryptocurrencies / Mining (Altcoins) / Re: How to mine XMR on multiple GPUs, GeForce GTX 1060?

on: May 12, 2018, 09:43:30 AM

Quote from: dd2017 on May 08, 2018, 11:34:30 PM Hi everyone: I haven't done any more research on this since I built this rig in June of 2017. It has 5x GeForce GTX 1060 gpus running in Windows 10. I've been using it exclusively to mine ETH + SC. Apart from that I also started mining XMR using my CPU on my main computer but that soon became too annoying to do (computer gets too slow and noisy) so I stopped after about a month. I was mining XMR via the xmr.nanopool.org pool and was able to accumulate 0.18812771 XMR. So now I want to get that XMR out of that pool. I see that they have a minimum payout of 0.3 XMR (if I'm lucky to change the setting from 1 XMR originally.) Now I stopped mining ETH on my main mining rig and tried to set up XMR mining instead so that I can bring up my XMR balance in the pool to be able to withdraw it. Unfortunately I couldn't find a straightforward XMR mining software for Nvidia GPU mining. I was able to get "xmr-stak-win64" to run on my miner that seemed to have worked for awhile. Unfortunately that miner seems to crash sporadically after about a day of running on my system. Do you know of any XMR mining software for Windows that works with nvidia GPUs? Hi, Aside from that being said you can always request Nanopool team for an early one-time payout if your balance is above 0.05 XMR. Before doing that make sure your XMR mining is turned off. Feel free to send me your Nanopool account link directly to speed up this process.

Pages: [1] 2 »