 Show Posts
|
|
Pages: [1] 2 »
|
|
Does anybody know how to convert the XMR address to the old style with tag and new style with integrated tag back and forth? Some exchanges require the new style and others require the old style - I am using kraken and trying to transfer the XMR from kraken over to OKEX which is asking for a tag but kraken has the new style with integrated address and no separate tag.
Thanks in advance,
Sylvan
|
|
|
|
|
Hey Wolfpackbot team, nobody is answering my emails or support tickets. Whats going on?
|
|
|
|
|
If u are willing to pay the fees then you can pay by c/c but I must take it over the phone, we can only ship to the billing address, if you want to pay with c/c pls send PM.
|
|
|
|
|
FYI- We will have spare blades available in our USA warehouse
|
|
|
|
|
FYI guys, we are going to keep this group buy open, our other factory can not match the price, and these units are proven in quality and we have a good relationship with the engineers for warranty replacement parts. I do not recommend overclocking them. If you attempt to overclock then it will void the warranty.
|
|
|
|
|
we can still accept c/c through authrorizenet but the shipping and billing address MUST match or it will not be accepted.
|
|
|
|
|
It's about the same.... the 1TH are probably a little louder than 180g ant, but it's not by much.....
|
|
|
|
|
Regarding the noise, it is not bad.... The sound is about the same as 2 or 3pc of antminers running, maybe less...... Nothing like the technobit units
|
|
|
|
|
Ty Ninja, pls send order to Cheshyr by PM
|
|
|
|
|
Please remember that if you want the smaller case size to say so when you place your order!
|
|
|
|
|
@xjack: answered you on eBay
|
|
|
|
Hey Guys, I just wanted to let everyone know, that my company has been in business since 1998, we design and market many products, we currently sell to Sears, Petco, PetSmart, Amazon and other retailers, on ebay we have over 20,000 feedback rating on one of the accounts with a 99.7% positive ratio. This unit bids up to over $7,000 on eBay u can see our finished auction here: http://www.ebay.com/itm/BITCOIN-MINER-1TH-MINING-RIG-1TH-S-COINCRAFT-A1-28NM-ASIC-CHIP-1000GH-S-/310880749188?pt=LH_DefaultDomain_0&hash=item4861efc684 and we have another one closing in 5 days here: http://www.ebay.com/itm/BITCOIN-MINER-1TH-MINING-RIG-1TH-S-COINCRAFT-A1-28NM-ASIC-CHIP-1000GH-S-/310887614404?pt=LH_DefaultDomain_0&hash=item48625887c4We have an office in China (Yantai) with two full time agents, a "connected" chinese customs broker, a factory in Ningbo, three warehouses with offices in USA, one in UK, and one in AU. If anything goes wrong with your miner we will be able to resolve it free of charge in the first 6-months, and after that will only charge for parts; We will have all parts; PCB's, spare modules available. We can't give refunds for mining equipment, but we are not going anywhere, and will make sure it keeps running for you. I have been running one of these 1TH units for weeks now and it has never missed a beat...... Anyways, I wanted to speak to the credibility issue and I have no problem accepting paypal, but as you can see we are getting this buy basically at below normal cost so we have to ask you to pay the paypal fees. If you are willing to pay the fees, then I don't have a problem, just PM us. I know this buy will have to be closed soon as the batch is almost sold out already. Dave is very modest, he is actually an all-star embedded systems engineer and we are developing next generation mining gear as I type this message, so stay tuned...... Best Regards, Newb |
|
|
|
|
Not to go off topic here, but USA does not have import duties but there is sometimes a customs broker fee which is paid by the sender (included) and Canada almost ALWAYS has a broker fee that usually comes due as a COD charge when the package is delivered by UPS or DHL and FedEx it is later sent by invoice after the delivery. I was just saying that we will be covering any and all import duties, broker fees, shipping costs, handling costs, etc... for USA and Canada
This batch of miners is running out fast, there are only 1400 in the March 18 batch of which about 1100 are already sold, we will have to close the buy when they are all sold out. The next batch will be more expensive, because the March 18 is a special promotionary price...... Thats why we closed the March 10 group buy and created this one so we could all get the lower price.
|
|
|
|
|
I forgot to say, all import duties and taxes are included and will be prepaid (as well as the export tax) in the price for USA and Canada - other Countries may or may not receive additional brokerage fees, VAT, or duties from their government which they will be responsible for.
Thanks,
Newb
|
|
|
|
|
Update:
We can make this unit in a smaller footpring 48X30X28cm rather than 48cmx31cmx35cm. The two story design with plexiglass seperative floor was engineered to create an effective wind tunnel, giving maximum cooling effectiveness. However, we do understand that many want as small a footprint as possible, so we designed the smaller version as well, it also has built in cooling and heatsinks, so please request the smaller case with your payment if you prefer that. Also, please make note that the price includes the 20% chinese export tax, and priority express shipping from DHL or FedEx, there is no faster shipping option, anyone that says that they can consistently ship in 3-days and clear customs on both sides is not being truthful.....
thenewb
|
|
|
|
|
I don't know what the time it takes a block has to do with it, or the duration of the round.... but I haven't had a payout from slush pool all day and usually I have about 10 payouts by now, does anybody else have this problem today?
|
|
|
|
Hello Board, We are looking for a reference design for 1TH+ miner with this chip. Also, my company is working on development of several miners and possibly ASIC chips, if anybody is looking to partner up, we have capital, marketing machine, two software engineers, one mechanical engineer, two sourcing agents full time on the ground in China, 3 large warehouses in the USA, full logistics capabilities. We could use someone to help with PCB design, chip design, miner design, etc.... We have a very close relationship with factories in China that can be trusted as well. We want to get some products to market ASAP. P.S. Does anybody have any experience with this chip: http://www.blackarrowsoftware.com/store/bitcoin-asics/ ? Please advise, thenewb |
|
|
|
Hello Board, Does anybody have any experience with this chip: http://www.blackarrowsoftware.com/store/bitcoin-asics/ ? We are looking for a reference design for 1TH+ miner with this chip. Also, my company is working on development of several miners and possibly ASIC chips, if anybody is looking to partner up, we have capital, marketing machine, two software engineers, one mechanical engineer, two sourcing agents full time on the ground in China, 3 large warehouses in the USA, full logistics capabilities. We could use someone to help with PCB design, chip design, miner design, etc.... We have a very close relationship with factories in China that can be trusted as well. We want to get some products to market ASAP. Please advise, thenewb |
|
|
|
|
Ok so the value of bitcoin has nothing to do with the difficulty? How do they determine difficulty? By the amount of miners that are working in terms of Hash power?
|
|
|
|
|
