Excuse me for my inaccuracy, but increasing of parallel threads leads to increasing memory usage, so more threads, more speed.
I'm not sure of my reasoning, please correct me.
Will be better if 8 Gigs cards to use full memory with increasing of speed

That may indeed be true, two threads instead of one in parallel. But not sure that will bring much - the cores are well loaded and no long idle times in 192/7. Also I do not have a 8G AMD, so can not test ^^ Maybe you can check if its indeed better to run the miner 2x on same cards, but I doubt it will bring much more then 1-2% maybe.

S E:\lolMiner_v06_alpha3_Win64\logs> Get-Content .\2018-11-24_17-14-14.log -Wait -Tail 30
et-Content : The process cannot access the file 'E:\lolMiner_v06_alpha3_Win64\logs\2018-11-24_17-14-14.log' because it is bein
 used by another process.

The description is still for 0.5, 0.6 uses less memory. But why you want to use more when you do not need to?

Any news about Cryptopia?

in my case it automatically adjust SievePerRound:

Work received: height=2555695 diff=10.991005 latency=31ms
 * warning: no enough candidates (16071 available, must be more than 16384
increase sieves per round to 13
.
.
Work received: height=2555703 diff=10.99101 latency=46ms
 * warning: no enough candidates (13892 available, must be more than 14336
increase sieves per round to 12
.
.
Work received: height=2555704 diff=10.991011 latency=46ms
 * warning: no enough candidates (16325 available, must be more than 16384
increase sieves per round to 13
.
.
Work received: height=2555717 diff=10.991013 latency=31ms
 * warning: no enough candidates (15526 available, must be more than 16384
increase sieves per round to 14

WARNING: difficulty grows and can reach 11!
All previous xpmclient versions automatically switch off when work with difficulty 11 will be received!
You can follow 2 ways:

1. Manually edit config.txt when difficulty reach 10.99+

2. Use new version 10.2-beta.

...

New xpmclient version 10.2 beta available HERE. New features:
- Radeon RX Vega support. See config.txt

With "good" drivers you can get 14,5-15 CPD on Vega56 and more than 16 CPD with Vega64. What is "good" drivers? Need more statistic from miner users.

- Difficulty target automatic switch. For use this feature, edit config.txt:
With this settings miner automatically switch to target=11 when difficulty reach 10.991.

Remember, that CPD with target 11 will be less by 28-29 times than you see with target=10!

I tried to give the original intensity 23 as you type but writes that high intensity: https://imgur.com/a9GrAs0.
So I lowered to 22 and the resulting value is 30 Mh/s here is the screen: https://imgur.com/CWOPvkZ.
Consumption is 970 W at this setting and core temperature also 75 degrees, which is quite high for me.
I'm trying to reduce the GPU rate as Mhz and core voltages and later I will publish my results.

Here you go;

1) Go to this link and download wallet
https://sourceforge.net/projects/pascalcoin/

and
Go to this link and download windows binaries

https://github.com/Vorksholk/PascalCoin-OpenCL/releases/download/v1.00/PascalCoin_OpenCL_ProxyMiner_v1.zip


2) Open wallet and let it sync.. (By the time it is syncing you can do other things as follows)

3) Go to Project> Options > Set miner name (8 letters or numbers) I keep it "12121212" (btw set password for your wallet as you like)

4) On the same page.. Make sure that "JASON-PRC Server" is ticked

5) Default port is 4009 .. if you want to change it .. Change it and remember it. (I would keep it default)

6) Miner Server Private Key : Always Mine with this key  and select your "12121212" from dropdown.

7) Hit OK and go to main wallet screen

Tick "Explore accounts with one of my wallet keys"

9) Now Select the key 12121212 from the dropdown

10) By this time the Sync will be half way done..  Sync will take a long time (5-10 min) So give it some time

11) You should be able to See "Node Status" "Running" in green.

Now your wallet is ready ..

12) Now open "PascalProxyv2.jar" from the same folder (Give it a minute to open ; it will open in command prompt)

13) Enter desired host : 127.0.0.1  > hit enter

14) Enter desired port : 4009 (Or if you changed it before use that port)> Hit enter

15) Enter number of GPUs to support : 6 > Hit enter

16) Please enter miner prefix : 12121212 > Hit enter

17) Minimize the command prompt window

18) Now create a batch file "start.bat"

19) Edit batch file in notepad :
cd C:\Pathto your folder\PascalCoin_OpenCL_ProxyMiner_v1
PascalCoinOpenCL_ProxyMiner.exe p0 d012345 c30

20) parameter c works best for me but you can try 25-50 range; if you see hashrate too low.. then try changing this.  

My ETH address:
0x5181c3A1CBC352698747e3c9A9DCDD5194252BA1

Version 1.5.0 released!

[1.5.0] Support for more pools.
[1.5.0] Allow again extranonces up to 28 bytes (fixed mining problems with nicehash).
[1.5.0] 1-2% increase in hash speed for device specific kernels.

I only got 240h/s on 11.1

Im using rx 480 8gb stock rom


my bat confg >>>

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool hub.miningpoolhub.com:20575 -zwal john1010.MyPC -zpsw x -wd 1 -r 0 -tt 80 -tt -72 -i 8 -a 2

Can someone share his confg, or Am i missing something?

Thanks

@vapourminer

ok, maybe its really better to set for miner sessions set instead of setx.

you can tell me how to delete if i allways used setx - restart rig?

Thanks for answer

Claymore recommends  GPU_FORCE_64BIT_PTR=0
What is the difference between values 0 and 1?

For me is also faster with v9.3 (R9 390) 

I might add the option to specify the pool certificate fingerprint on the command line. This would allow you to mine on a pool that uses self-signed certificates in a mostly secure way.

seem running perfectly on an other pool ... must warn drawfpool ...