 Show Posts
|
|
Pages: [1] 2 3 4 »
|
nicehash earning raised to 0.0013 btc again
|
|
|
|
Did you see new lyra2rev2 miner machine from Fusion Silicon.
it is two times powerful from zig z1 and it has less electricity consumption.
Total hash rate 12.96 Gh
Total Power: 1110 Watt
This is too bad for dayun zig miner owners.
http://www.fusionsilicon.com/#/goodsDetails/X1
|
|
|
|
Hi, Please advise pool for zig+. I am now with https://nlpool.nl/ forced to manual restart every week. I hope changing pool will fix the needs for the manual restart. how much do you earn there? |
|
|
|
What’s about new firmware ?
by the way we can repeat our willing @zigminer frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart. would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately. |
|
|
|
Hello,
I have my Zig Z1 since middle of october 2018.
I have a problem with my Zig Z1.
About 2 weeks ago, I was not able to connect via internet on my Zig Z1 but it was continuing to do mining. So yesterday I decide to do power off then power on my router and my Zig Z1 but now I can not see on internet and it's not mining. I used some software to give me the list of what ip adress is on my network but I can not see my Zig Z1.
Does someone have and idea of what I can do to fix that?
Thank-you
Daniel
you can use modem interface to find miner's ip. you can see ip there if you have a chance to log in modem. |
|
|
|
I have been using Zig1 since release. All of a sudden I cannot load the dashboard anymore and so cannot get my Zig1s to operate. Every time I try to load the page it is showing "Internal Error Occurred". Can anyone advise me on how to fix this?"
check your zigminer ip address |
|
|
|
The latest firmware for z1+ looks like it is stealing hashrate, a LOT of it. I had it set to 1000 freq with auto freq to 1, and it averaged 1.5gh while still consuming 1170w of power continuously, rejected shares/errors were under 3%. So for that power, the hashrate should have been 4 times higher, I think the hashrate is redirected, getting screwed once with the initial sale wasn't enough...now we get screwed with this.
interesting idea . are you sure with it. how many hours did you try. i heard about last version avg hashrate g/h between 5 and 6. |
|
|
|
@zigminer
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
next version will solve this bug. Dear @zigminerwhen will we have new image version. @zigminer where are you? we are waiting new image. your site is under construction. please give a sound. |
|
|
|
Apparently Dayun company stopped sponsoring the asikminervalue service and they showed real profit, not fake =))) I personally dig the coin MONA, and sell on the stock exchange, so the profit is higher! I dig on F2POOL https://www.f2pool.com/about asicminer value.com so it is with my effort. but too late. how much money do you get from mining mona. |
|
|
|
@zigminer
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
next version will solve this bug. Dear @zigminerwhen will we have new image version. |
|
|
|
@zigminer
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
next version will solve this bug. Dear @zigminerwhen will we have new image version. |
|
|
|
I know its an ASICs but as @Phuripat said that YOU MUST READ and Learn more for example Baikal X10 is an ASIC and have capable more than 9 different algo and will be added later more as you can see the production's desription below!!! look at this https://www.baikalminer.com/product09.php Baikal X10 mines X11 algorithm, which is a chain of 11 different algorithms. All of the other algos that the X10 supports are made out of the same pieces that X11 uses, which is why they are available. The chances that the ZigMiner supports anything but lyra2rev2 are slim to none. thanks for informations. i know that lyra2rev2 is also chained 5 different algos. (Blake, Keccak, Cubehash, LYRA2, Skein and Blue Midnight Wish ) As your opinion, can one of them be used for this machine. |
|
|
|
@zigminer
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
next version will solve this bug. |
|
|
|
|
@zigminer
frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.
thanks in advance.
|
|
|
|
What is the better settings for AUTORESTART ?
hashrate autorestart does not work.(@zigminer try to solve it soon i think.) only working autorestart error counting. |
|
|
|
yes it is true. my device z1 and my friend device is z1, too. we bought them almost same date. both we are using 1409 image verison. we used same config but he made oc to 1000 mhz but i can not. think about how come it is possible. this is strange.
This is called "silicon lottery". Google it. yes i read it thanks. but it is little bit different. i think manufacturer limited some machines by bios. and then they announced zig1 plus. they sold more. You can believe what you like, but if they're the same revision and the same firmware, it's a silicon lottery issue. yes you are right. they manufactured these devices. and then they explorered some chips that runs at higher Mhz. and then they separated them. after that they manufactured z1 PLUS with separated chips that running higher mhz. |
|
|
|
to @zigminer founder thanks for new image and fan speed option. as you said below, we wait the autorestart option for low hashrate and hashboard. i wonder that will these machines able to run lyra2rev3 in near future or any other algo. about overclock , maybe next version. i need more test .
about hashrate goes down , just config autorestart , if hashrate low , auto restart will slove this problem.
Please stop crying for everything, make a minimum of research and read closely what he wrote... "JUST CONFIG AUTORESTART", the option is already available, since the first release... It's not zigminer fault if you can't even read a small dashboard who is crying? please pay attention what you wrote. its old config what you mentioned does not work. you should try before you talk. and zigminer said that "i will develop new autorestarter option depends on hashrate. |
|
|
|
yes it is true. my device z1 and my friend device is z1, too. we bought them almost same date. both we are using 1409 image verison. we used same config but he made oc to 1000 mhz but i can not. think about how come it is possible. this is strange.
This is called "silicon lottery". Google it. yes i read it thanks. but it is little bit different. i think manufacturer limited some machines by bios. and then they announced zig1 plus. they sold more. |
|
|
|
Hi all ! faced such a problem, my miner works on firmware 09.14 + overclocking the core to 1000 and the auto frequency is set to 1. but there is no stability! with all this, it consumes 1500 watts of power! There are skoks up to 20 gigahash! and on the pool, too, these slopes are fixed! But I noticed that not all panels on the blade became active, but at the same time each blade gives out in peak to 10-15 gigagesh! which pushes to the idea that it is quite likely that the manufacturer has programmatically limited the power to 6.8 gigahesh! and sorry for the mistakes, I'm just from Russia))) https://ibb.co/2Nyn4Q0https://ibb.co/r5VRtdkhttps://ibb.co/Y09yzHxhttps://ibb.co/7nK6cKXyes it is true. my device z1 and my friend device is z1, too. we bought them almost same date. both we are using 1409 image verison. we used same config but he made oc to 1000 mhz but i can not. think about how come it is possible. this is strange. |
|
|
|
|
