The fan on my main cpu doesn't work.  Can I get a replacement JDL2507S fan?

Hi,  I have a full node with 2 standards.  They all seemed to boot up correctly and I even am able to log in fora moment and I get a spike in brains but the the fall  node will reboot.  Not enough time to explore what is happening.   Samme behavior even if full node is by itself.  Any thoughts?

I have set port forwarding to the ip address of one of my futurebit btc miners and it has 10/32.  But the router won't let me forward 8333 for any other futurebit node ip address.  What am I supposed to do with my other futurebit btc full nodes if i can't use 8333 for them?  They all say 10/32.
   Or is it that after one is forwarded the other in my "subnet" works with it?

So by my calculations the included 512GB card will last just shy of 2 years?
(((512−412.19)×1,000)×10)
÷60÷24÷365=1.89897 years

Bitcoin blockchain is 412.19 GB so difference is 99.81 GB.
 multiply by 1000 to get MB (99,810)
Each 1MB takes 10 minutes so we multiply by 10 to get total minutes which is 998,100 minutes. Then divide by 60 for hours then 24 for days and finally 365 for years.  1.89897 years

Is it fair to say that if you have a standarx version running off of a full  version of the Apollo BTC then you are effectively doing Parallel processing?

Yeah, its working.    Once you told me i needed to see devices in "Devices and Printers" I started suspecting connection problems.  I connected the USB hub to another usb 2.0 port and the Silicon Labs CP210x devices showed up.  I then went and connected the hub to a different USB 3.0 port and its working there.  but the original USB 3.0 port doesn't see them any more.  So now i am worried about my ports.  I use a powered usb hub for several reasons but I might have to find another.


Anyway, thanks

P.S.  I am looking forward to your Apollo pods!!!

thanx for your responses.  Yes, Windows was updated so I had high hopes to your responses.  But after uninstalling, rebooting, and reinstalling it still didn't work.  The lights don't flash at all.  they just stay a consistent green.

I bought them at the Maker Faire in NY and I had no trouble setting them up.  But about two weeks ago they both stopped working.

Here is the message:


 ST:2  F:0  NB:1  AS:0  BW:[ 26/  4 B/s]  E:0.00  BS:0
 0            |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
------------------------------------------------------------------------------------------------------------------------
NO DEVICES FOUND: Press 'M' and '+' to add
------------------------------------------------------------------------------------------------------------------------
 [2018-10-22 14:26:14] Waiting for devices; press 'M+' to add, or 'Q' to quit
 [2018-10-22 14:26:14] Probing for an alive pool
 [2018-10-22 14:26:19] Pool 0 stratum+tcp://us.litecoinpool.org:3333 alive
 [2018-10-22 14:26:19] Pool 0 is hiding block contents from us
 [2018-10-22 14:26:19] Network difficulty changed to 8.88M (63.60Th)
 [2018-10-22 14:26:19] Stratum from pool 0 detected new block


Note the message: Pool 0 is hiding block contents from us


What is going on?

I bought them at the Maker Faire in NY and I had no trouble setting them up.  But about two weeks ago they both stopped working.

Here is the message:


 ST:2  F:0  NB:1  AS:0  BW:[ 26/  4 B/s]  E:0.00  BS:0
 0            |   0.0/  0.0/  0.0 h/s | A:0 R:0+0(none) HW:0/none
------------------------------------------------------------------------------------------------------------------------
NO DEVICES FOUND: Press 'M' and '+' to add
------------------------------------------------------------------------------------------------------------------------
 [2018-10-22 14:26:14] Waiting for devices; press 'M+' to add, or 'Q' to quit
 [2018-10-22 14:26:14] Probing for an alive pool
 [2018-10-22 14:26:19] Pool 0 stratum+tcp://us.litecoinpool.org:3333 alive
 [2018-10-22 14:26:19] Pool 0 is hiding block contents from us
 [2018-10-22 14:26:19] Network difficulty changed to 8.88M (63.60Th)
 [2018-10-22 14:26:19] Stratum from pool 0 detected new block


Note the message: Pool 0 is hiding block contents from us


What is going on?