 Show Posts
|
|
Pages: [1] 2 »
|
GMiner v2.72 available for download
v2.72
+ fixed memory leaks on AMD GPUs
+ fixed compatibility with latest linux distributions
+ fixed crashes appeared in v2.71
Ethash fee is 0.65%
KAWPOW fee is 1%
we need GPU names like T-Rex please makes it much easier to adjust the multi GPU rigs |
|
|
|
|
2
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: NBMiner v39.0, GPU Miner for ETH, CFX, RVN, GRIN, BEAM, AE, ERGO, ZIL
|
on: November 14, 2021, 08:16:19 PM
|
no one is answering, the Telegram group is all Chinese and no answer can we set DEV Fee in NBminer to 0.65 instead of 1? does it have to be full integer or can it be also partial? Also the BotFarm here is updated to support NBminer https://bitcointalk.org/index.php?topic=2071108.0check it out, very handy to set the afterburner and make sure all is working |
|
|
|
|
3
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: NBMiner v39.0, GPU Miner for ETH, CFX, RVN, GRIN, BEAM, AE, ERGO, ZIL
|
on: November 12, 2021, 05:00:09 PM
|
|
How can I see the Dev fees taken?
I tried log verbose and I could not find any other worker or wallet reported but mine,
how does NBminer take dev fees?
|
|
|
|
|
switching over from Phoenixminer,
would appreciate some quick help on RTX 3000 series (no LHR)
what parameters are recommended for these cards?
3060ti
3070
3090
I use cclock and clock and power limit
is there a use for lock clock , lock voltage and ccdvc on RTX 3000 series?
would locking clock better than limiting ?
|
|
|
|
just use latest drivers but you should use nbminer much better , pheonix is a bit crap now dont support new rtx cards a lot of it is buggy plus the hashrate reporting is dubious on it too , they need whole new upgrade on it really used to be good but theres much better out there now.
Any reason to upgrade the drivers on the RTX 3000 series? version 466 still here, any improvement worth upgrading NVIDIA driverS? been using HiveOn pool but in the past week they had some down times in North America, considering a switch, is the income on the ethermine better considering they have 1% fee while Hiveon is free? Do you think NBminer is better even for older RTX 3000 series? Phoenixminer seems to be sleep which sucks considering how much his Etherum wallet has grown thanks to our fees, he posts here like once a month if that... |
|
|
|
is this still being updated? |
|
|
|
|
@PhoenixMiner
1) How can I find out with GPU number is connected to which PCIE port?
I have 14 GPU on a rig using ASUS B250 Mininging expert , Each pcie is numbered on the motherboard
after a while and GPU crashes restarts , I noticed my GPU numbers do not match to the PCIE ports I set them originally
It is hell to find out which GPU is which... any help in identifying GPU numbers is greatly appreciated
2) If I want same settings for all RTX 3070s and special settings for ie. RTX3090 on the same rig how do I have to set that in the string of phoenix miner considering the GPU numbers can switch or are hard to find?
running in windows
|
|
|
|
|
is @Phonexminer hacked
I dont remmeber they ever gave a d version out, it was either beta like 5.5b
or the release 5.5c
5.5d has been usually malware
checked the HASH of 5.5C on the new website and old file and they match but hte 5.5D is a new file so if phonexminers account on here is hacked and their github is hacked... ummm
|
|
|
|
@PhoenixMiner anyway you can add the ABSOLUTE CORE LIMIT for Nvidia cards like what is implemented by HiveOs? they save good amount of electricity by lowering the core beyond -500 and keep the has for eth still up. also any tricks on the RTX 3060 model? |
|
|
|
RTX 3000 series fellows..
What straps do you guys use in windows? sometimes my 13GPU RTX 3070 rig crashes and does not load well after the restart the only way to fix it is system disk clean up turn off the GPUs and then turn everything back on if I don't do that the DAG takes very long to create and I get errors halfway through DAG creation and the system crashes again Is there a certain memory clean-up, DAG leftover files somewhere , or some mess that I can set to have cleaned during a start-up to help with this? Log file is here https://pastebin.com/ffxrrWEDSeams like on the startup it skips creating the dag or it is a messed up dag creation...
|
|
|
|
windows 10 do a system cleanup under disk clean up reinstall MSI afterburner the new version of driver is okay run the cards cooler and lower mem clock I cannot get Pheonix to work more than 4-6 houirs without crashing. Errors 216, 219, 462, 999 All sorts of errors.
I have the latest 461.09 Nvidia drivers. Do I need to downgrade my drivers?
I was mining in my computer with a Gigabyte Geforce RTX 3060Ti 5.5c since february 9th and it was ok. Later, I swaped to a MSI Geforce RTX 3070 on February 12th and it was ok, but a couple of days after that I started to see problems. Since then, I've seen it starts to mine for a couple of minutes (or a couple of hours, I actually can't get the time pattern here), then shows some artifacts on the screen (  ) and crashes, rebooting the PC. I was always working with Nvidida drivers 461.40. Right now I'm downgrading to 457.51 version for testing that. Anyone have an idea what could be happening here? Looking into the log files, I see that sometimes it stops randomly (the file ends there) without giving any error. But sometimes the files show some kind of errors like these: 2021.02.12:18:55:39.192: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.02.12:18:55:39.196: GPU1 GPU1 search error: unknown error
2021.02.12:18:55:39.198: wdog Fatal error detected. Restarting.
2021.02.12:18:55:41.188: main Eth speed: 0.000 MH/s, shares: 63/0/0, time: 1:22
2021.02.12:18:55:42.057: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xb10f847382424686ae3e90635f73a18f98cd9c03647a002baea49dd900e2345e","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb50"]}
2021.02.12:18:55:42.057: eths Eth: New job #b10f8473 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.12:18:55:42.505: hwmc GPU1: unable to get temperature - Unknown Error (999)
2021.02.12:18:55:42.633: main GPU1: 60%
2021.02.12:18:55:43.945: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2fdb5f38896382e201c369209b6ff9b8b9d4cc06ece2f3ddeaebed496b40b75c","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]}
2021.02.12:18:55:43.945: eths Eth: New job #2fdb5f38 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.12:18:55:44.252: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x41609475f936b4a4e238f52b00e780bc7cbfa5358854e3326f861b2d21d8b3ca","0xecea8576ebef188c15f64731e7a9f84c1cb41d85516730fa7b0bab88c4feb506","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb4bb51"]}
2021.02.12:18:55:44.252: eths Eth: New job #41609475 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:09:01.748: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2021.02.21:13:09:01.749: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x750cea9c12d42b76b61c980a1545bd6e693bc7a12490a4fbc1083869283a8cf9","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5994f"]}
2021.02.21:13:09:02.096: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.02.21:13:09:02.096: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999)
2021.02.21:13:09:02.097: GPU1 GPU1 search error: unknown error
2021.02.21:13:09:02.098: wdog Fatal error detected. Restarting.
2021.02.21:13:09:02.423: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x2b6ce5fb860f98940c532b9207a559d08f20d0efcccb9f00fc47f181aa72faad","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]}
2021.02.21:13:09:02.423: eths Eth: New job #2b6ce5fb from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:09:02.615: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5bc91187170c303dc2947e1d5bbf2fa2e1ab911a1eba6aa6a2544141b6e74663","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]}
2021.02.21:13:09:02.616: eths Eth: New job #5bc91187 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:09:03.901: main Eth speed: 0.000 MH/s, shares: 22/0/0, time: 0:31
2021.02.21:13:09:06.560: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd385ea208d4bdb8d78b958c948bc6dbb1fe88301a2d1f00d96c2d24db58dc111","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59950"]}
2021.02.21:13:09:06.560: eths Eth: New job #d385ea20 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:11:39.238: main *** 0:02 *** 2/21 13:11 **************************************
2021.02.21:13:11:39.238: main Eth: Mining ETH on ssl://us1.ethermine.org:5555 for 0:02
2021.02.21:13:11:39.238: main Eth: Accepted shares 3 (0 stales), rejected shares 0 (0 stales)
2021.02.21:13:11:39.238: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.02.21:13:11:39.238: main Eth: Maximum difficulty of found share: 19.0 GH (!)
2021.02.21:13:11:39.238: main Eth: Average speed (5 min): 51.916 MH/s
2021.02.21:13:11:39.238: main Eth: Effective speed: 88.89 MH/s; at pool: 88.89 MH/s
2021.02.21:13:11:39.238: main
2021.02.21:13:11:40.643: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6f7620ad2471b23fd6b810b1bf83867bdf536129eadb7e361ffcdc4cdfdaddb3","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5995e"]}
2021.02.21:13:11:40.643: eths Eth: New job #6f7620ad from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:11:41.831: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999)
2021.02.21:13:11:41.831: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.02.21:13:11:41.831: GPU1 GPU1 search error: unknown error
2021.02.21:13:11:41.831: wdog Fatal error detected. Restarting.
2021.02.21:13:11:42.392: main Eth speed: 0.000 MH/s, shares: 3/0/0, time: 0:02
2021.02.21:13:11:44.014: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:13:16:11.849: main Eth speed: 51.915 MH/s, shares: 0/0/0, time: 0:00
2021.02.21:13:16:14.511: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x9830b31ad6f538da3773ddb39e70c534aaa5e889b109a9e3aadeb0c7cd9da923","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb59977"]}
2021.02.21:13:16:14.511: eths Eth: New job #9830b31a from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:13:16:15.957: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999)
2021.02.21:13:16:15.957: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.02.21:13:16:15.957: GPU1 GPU1 search error: unknown error
2021.02.21:13:16:15.957: wdog Fatal error detected. Restarting.
2021.02.21:13:16:16.921: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.02.21:23:22:28.835: eths Eth: New job #36a2e139 from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:23:22:28.863: gps1 CUDA error in CudaProgram.cu:267 : unknown error (999)
2021.02.21:23:22:28.863: GPU1 CUDA error in CudaProgram.cu:465 : unknown error (999)
2021.02.21:23:22:28.863: GPU1 GPU1 search error: unknown error
2021.02.21:23:22:28.863: wdog Fatal error detected. Restarting.
2021.02.21:23:22:29.459: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:03
2021.02.21:23:22:31.819: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.02.21:23:22:31.820: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x39865a0","0x67726f38238f0422bcbefb08bd64b5dc32b6cb63381cb91d01ce8188ad102c54"]}
2021.02.21:23:22:32.000: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x36a2e139aee6782c36d135ed5bbc1cb936b23919f3ae3bcd69e89dc5bb9e48ca","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]}
2021.02.21:23:22:32.776: hwmc GPU1: unable to get temperature - Unknown Error (999)
2021.02.21:23:22:32.844: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xf211f60e309aeb7087c64a517c4f4468360457d49c9390e855969b1ddb4966bd","0x6b7fe9651d4c13b078206f499a8bf24cfe4fb734f8627aa5eadf268f6b2c57ed","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xb5a474"]}
2021.02.21:23:22:32.844: eths Eth: New job #f211f60e from ssl://us1.ethermine.org:5555; diff: 4000MH
2021.02.21:23:22:32.900: main GPU1: 38%
2021.02.21:23:22:34.562: main Eth speed: 0.000 MH/s, shares: 5/0/0, time: 0:04
|
|
|
|
Radeon RX 5700 XT 8176 MB · Sapphire Nitro+
Micron GDDR6 113-410XT-UO4
FAN 50
CORE 1430
VDD 790
MEM 950
VDDCI 790
59,37 MH/s
Used 5990
Thank you for those was able to get results close to that RX 5700 BIOS moded with MPT and DDRMA12 at 6000, CORE 1430 VDD 790 MEM 1860 to 1890 depending on the card in windows 10 using wattamn I get around 120W in software probably 140W at the wall and 58.3MHs to 59MH/s the only annoying part is dealing with wattman not reloading the saved profile after a possible crash and restart.. any solution for that? |
|
|
|
|
would appreciate the best parameters for RX 5700
if you could copy paste the string you use
overclocked by phonex or by other app?
|
|
|
|
hello,
the new Feature -mcdag 1 doesn't work on my Gigabyte 3070. using v.5.5c under win10. When i oc using afterburner before starting the miner, i will get only rejected shares after dag generation. If i dont oc befor starting the miner, the shares works fine even i oc after dag generation.
even when using -lidag 3
If you are using external program to overclock the memory (MSI Afterburner in your case), there is no way for PhoenixMiner to control that program's behavior. So, in order to use -mcdag 1, you need to let PhoenixMiner to set your memory overclock (and turn off Afterburner). You can set the same settings that you were using in Aftrburner (e.g. -powlim -30 -mclock +800 -mcdag 1 will set power limit to 70%, will overclock the memory by 800 MHz, and will remove the memory overclock during the DAG generation to avoid corrupted DAG buffer. Note that the recent Nvidia drivers require PhoenixMiner.exe to be run as administrator in order to control the memory clocks.If I set the overclock by Phonexminer for RTX 3060 , and later change it with MSI afterburner, will the changes from afterburner take effect or they will reset back to the script again? Meaning will the script of phonexminer set the overclock once at the start or does it keep setting it ? for everyone having issues with the RTX 3000 series I found this amazing program that automates everything https://bitcointalk.org/index.php?topic=2071108.msg56163548#msg56163548I set it to set the MSI overclock to low mem speed then run the phonexminer wait a minute and then set the overclock on MSI to high mem speed, this way the DAG is already created it also monitors the rig if it creates bunch of errors it will restrt to force the DAG creation again with slow mem ... Runnig RTX 3060 ti with stable 62MHs Make sure to support his work for the premium version and you get notifications and access to your rig for just 10$ |
|
|
|
|
Thank you so much!
it helps me get 62Mhs from 3060ti instead of 59 and have a stable system
|
|
|
|
|
how can I set the miner to restart if it's getting a whole bunch of unaccepted shares?
hashrateerrors=5 did not do it...
|
|
|
|
Is anybody trying to mine with 6x 3080s and having issues with GPU#1 on 5.4c? After a duration of time GPU#1 just starts going crazy with the hashrate jumping around. When I look in GPU-z it shows vrel and vop being hit by the GPU. Upon closing and opening the software it doesn't seem to fix the issue. Now if I physically remove GPU#1 from the system (shut down and re-boot), and then I fire it up the next GPU that was #2 and has now become #1 now has the same issues. These things were perfectly stable in other rigs with only 1 or 2 3080s in them... Any ideas what the problem may be? These are EVGA 3080s (FTW3 and XC3 Ultras). I have tried different Nvidia drivers 460.89 and 461, but no luck. I just downloaded 5.5b and am trying that now. It has been stable for the first half an hour but we'll see if it just fails like the other one after a few hours.
what are the over clock settings? try older driver 457 I think |
|
|
|
|
Just got this error after 60Hours of running
MINERZ: Running for 59:12:29 on naw-eth.hiveon.net
MINERZ: Miner must be restarted, large log file size, please wait...
the miner was hashing okay and no other issue beside the log file size
is this by design? should I expect this every 60 hours?
How can I avoid it
Thank you
|
|
|
|
Hi,
I use phoenix miner 5.4.c and cmd windows randomly closes. No reboot, rig working normally. In log I can see this.
2021.01.06:08:16:17.773: main GPUs: 1: 32.695 MH/s (816) 2: 32.791 MH/s (803) 3: 32.317 MH/s (780) 4: 30.025 MH/s (824) 5: 56.951 MH/s (1443)
2021.01.06:08:16:18.652: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x7e97c43927166b3a060c15f206067b1c0d6797665fdfd0e3d33ed9d0c0608252","0x86eecd14e1f53d92884d92710bdf1cfef5c0239cf61f089763e14ac54a963f58","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2021.01.06:08:16:18.653: eths Eth: New job #7e97c439 from eth-eu1.nanopool.org:9999; diff: 10000MH
2021.01.06:08:16:21.684: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x5bc1cc5e47b43108da2c306120c1d0b916ba108a6ca7e4bf0ef0e18c02efa596","0x86eecd14e1f53d92884d92710bdf1cfef5c0239cf61f089763e14ac54a963f58","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2021.01.06:08:16:21.684: eths Eth: New job #5bc1cc5e from eth-eu1.nanopool.org:9999; diff: 10000MH
2021.01.06:08:16:22.883: main Eth speed: 184.767 MH/s, shares: 4665/1/0, time: 71:54
2021.01.06:08:16:22.883: main GPUs: 1: 32.695 MH/s (816) 2: 32.794 MH/s (803) 3: 32.325 MH/s (780) 4: 30.033 MH/s (824) 5: 56.921 MH/s (1443)
2021.01.06:08:16:22.980: unkn Quitting...
2021.01.06:08:16:23.155: hwmc GPU1: reset VRAM timings
2021.01.06:08:16:23.155: hwmc GPU2: reset VRAM timings
2021.01.06:08:16:23.155: hwmc GPU3: reset VRAM timings
2021.01.06:08:16:23.156: hwmc GPU4: reset VRAM timings
2021.01.06:08:16:27.117: wdog Stopping watchdog thread
2021.01.06:08:16:27.177: main Exit code: 0
How to start mining automatically. When this hapening I must start program manually. Please help.
use this app https://bitcointalk.org/index.php?topic=2071108and you can support him too if it helps |
|
|
|
Regarding the RTX 3060 Nvidia 30x0 series issue
@PhoenixMiner would really appreciate a word from you on this issue
We need a way to set the memory clock Low (windows msi burner +950 or below) before each epoch or when we start/ Restart the miner for DAG creation, after we can increase it all the way to +1500
the is the difference of 59MHs to 64MHs , 5MHs difference which add up to 60MHs for a 12 GPU rig
I used the -lidag 3 but it did not help with the Restart of the miner
PLEASE PLEASE PLEASE give us a response on this.
Can you please add a feature to lower the memclock before each DAG and epoch and go back up after?
I can set the miner to RESTART after the epoch change messes it up using -minRigSpeed <58> but that will not fix the issue since it will restart the miner with high mem clock set in MSI.
is there a way to set MHs of the GPU to be watched instead of the whole rig? -minRigSpeed like -minGPUspeed ?
THANK YOU VERY MUCH!
Does anyone know if we have minimum GPU speed monitor instead of the whole rig? |
|
|
|
|
