Show Posts
|
Pages: [1]
|
What if I abandon transaction? Risks? As long as you have a backup of your wallet.dat, there's no risk. Ok, I abandoned, but what next in my case? wait or what? And what is that ,,mystirious,, adress 1Cb5Hk4FyY7wvTNkfZJCgdnCaj6tmgYh61 is it change adress? Apretiate your help!
|
|
|
I send from 1PxbkNHMKXxrZP8KnJTYaG64VwDnchr9ri: Confirmed. 0.04517068 to my new wallet adress: 19yXZeABqCEmYHx8mdL7JapvkfLLUXrFf1 Still empty. 0.00100000 is the fee send to: 1Jxw2KfwDaVWgBZVsvdYLpT1Npyzf7cGTa Partially incorrect. Transaction fees are added to the block reward, the transaction fee is 0.00 010000 BTC. The address you mentioned did indeed receive 0.00100000 BTC, but it's not the transaction fee. I doublechecked adresses and check pc for maleware etc...before send Clearly, something different from what you expected happened. Could it be you tried to send a small amount (0.00100000 BTC) first (as a test), and for unknown reason it was send to the wrong address? The (fee) status for 0.00100000 send to: 1Jxw2KfwDaVWgBZVsvdYLpT1Npyzf7cGTa is unspent Again: it's not a transaction fee. Best case, the address holding 0.04517068 BTC and/or 0.00100000 BTC belongs to your Bitcoin Core. Worst case: you somehow managed to send everything to addresses you don't own. Have you tried just exporting the private keys, as suggested earlier? If your wallet contains the keys, this can be resolved within minutes. What if I abandon transaction? Risks?
|
|
|
Can you check everything you've written so far, and correct or remove irrelevant information? That might make it easier to understand your problem. I generate request link to my Blockchain wallet(19yXZeABqCEmYHx8mdL7JapvkfLLUXrFf1) This address for instance has never received a transaction. So showing it doesn't help. And Instead of receiving 0,0451 btc ( 0.0462 - 0.0011(transaction fee)) I received only 0,0011 btc. None of this is correct. These are the outputs: 1Jxw2KfwDaVWgBZVsvdYLpT1Npyzf7cGTa 0.00100000 BTC Unspent 1Cb5Hk4FyY7wvTNkfZJCgdnCaj6tmgYh61 0.04517068 BTC Unspent Which of those addresses belong to what wallet? Which amount did you send and which output is the transaction change? Can you double check all addresses and amounts in this post, and then post it again? Ok, so step by step: Last year I made a transaction from my Bitcoin Core wallet (very old version from 2013, not actualised and not sychronized at that time) to my new blockchain.com wallet. I send from 1PxbkNHMKXxrZP8KnJTYaG64VwDnchr9ri: 0.04517068 to my new wallet adress: 19yXZeABqCEmYHx8mdL7JapvkfLLUXrFf1 0.00100000 is the fee send to: 1Jxw2KfwDaVWgBZVsvdYLpT1Npyzf7cGTa I doublechecked adresses and check pc for maleware etc...before send My wallet 19yXZeABqCEmYHx8mdL7JapvkfLLUXrFf1 doesnt recieve nothing but there was appear new adress: 1Cb5Hk4FyY7wvTNkfZJCgdnCaj6tmgYh61 (wich is an change adress, i think, like there said a lot of people) and amount of my 0.04517068 is there (unspent status) here: https://www.blockchain.com/btc/address/1Cb5Hk4FyY7wvTNkfZJCgdnCaj6tmgYh61After a long and unsuccesfull comunication with blockchain.com tech.support I came here for help. First I actualize my Bitcoin Core wallet Then I sychronize all blocks by pruning Then I -rescan and sychronize blocks again The (fee) status for 0.00100000 send to: 1Jxw2KfwDaVWgBZVsvdYLpT1Npyzf7cGTa is unspent Status for 19yXZeABqCEmYHx8mdL7JapvkfLLUXrFf1 is ? and 0/unconfirmed not in memory pool. So that is my story Asking for help with solution wich will be rewarded
|
|
|
So I did complete rescan ,unfortunately it doesnt help any other ideas please? What happened to the transaction/wallet? Does the transaction in the 'Transactions' tab has an "X" tag on the left side? If the details says " Status: conflicted.....", it ( or its parents) may have been replaced by another transaction. If that's the case, you can't do anything to that transaction, it's just saved in your wallet but it's invalid. There is Question mark on the left (?) Status: 0/unconfirmed not in memory pool. Color: grey
|
|
|
Please, where i should put: -rescan ?
I am not a Mac guy, but I've read some things here that could work for you: https://bitcoin.stackexchange.com/questions/57312/how-exactly-do-i-run-the-rescan-command-for-bitcoin-qt-from-console-on-a-macMethod 1
Open "Finder".
Press Cmd + Shift + G
Paste this:
~/Library/Application Support/Bitcoin
Edit bitcoin.conf with TextEdit
Add this line:
rescan=1
Save it, then run Bitcoin-qt.
After you the rescan ends and you quit don't forget to revert the bitcoin.conf
Method 2
Right click Bitcoin-qt
Choose "Show package contents"
Go to Contents/MacOS/Bitcoin-Qt
Run Terminal.
Drag the file to terminal
Type -rescan
Press Enter.
Don't quit Terminal before the rescan ends and you quit Bitcoin-qt
It's done. So I did complete rescan ,unfortunately it doesnt help any other ideas please?
|
|
|
Please, where i should put: -rescan ?
According to your previous posts, seems that you are using MAC. For running bitcoin core with a startup option in MAC, you need to do the following. [Ref.]Open the Mac terminal. Then type open Bitcoin-Qt.app --args <options>
where <options> are your startup options. Just make sure to have a space between each option. Press enter and Bitcoin Core will start with those options. Replace option with rescan in the code above. -bash: syntax error near unexpected token `newline'
|
|
|
you'll most likely need to use -zapwallettxes command line argument Actually that is no longer available starting with Bitcoin Core 0.21.0, as you can read here. The new option available is abandontransaction (but I still have to read myself more on that) Also OP transaction is from 2020...Should I abandon transaction?
Should I wait?
The transaction is confirmed for more than 6 months. Wait and abandon are out of question. I think that what you should do is to make a copy of the wallet.dat (if you haven't) and then restart Bitcoin Core with -rescan. You can read more here. But if you are in pruning mode that would mean yet another full download of the blockchain, hence I'd wait for more ideas. Please, where i should put: -rescan ?
|
|
|
Hi NeuroticFish'!
Thank you for help and explanation of how prune works!
Seems like everything working good
...But: Its been exactly 20 days when I start to download whole blocjchain (its not downloading 24/7 but minimum 15 hours everyday and 24/7 during weekends) and Iam only on 44,44 % its goes very slow.
I think its beacuse of old hdd and small amount of ram (only 4 gb)?
Can I simply copy wallet.dat from old pc to my iMac with SSD and 12 gb of ram to make the process faster?
Or its not that easy?
Thanx in advance
Hi The things that may have impact on the speed are the internet connection speed, the memory/RAM and the disk too. (Still it took longer than I thought.) From what I know moving wallet.dat should work, as long as you are certain Bitcoin Core is stopped on both machines when you do this. But please keep in mind that the whole process will start from 0 on the new device, although with the new machine specs it should end faster than the old. I'll repost this link for where to find and where to put wallet.dat : https://en.bitcoin.it/wiki/Data_directoryGood luck! Hi! I am back again! So moving to faster MAC really really helped! It took only 3 days to download whole chain! I gave it a more 3 days to confirm - but nothing happened In options i can see that my transaction Status: 0/unconfirmed, not in memory pool I tryied to google why - but not sure what to do... Is the fee 0,00011 (for 192 bytes) for transaction too low? Should I abandon transaction? Should I wait? Thanx in advance
|
|
|
Thanx! Ive installed latest Bitcoin qt to my iMac - but i cant find Settings->Options->Size option to set prune (instead of windows version, where its easy to find) there is only Summary, Send, Recieve, Transaction panel
Mac's have that weird "one title bar for everything" approach... so it won't be on the panel that shows "summary, send, receive, transaction"... you need to look at the title bar at the very top of the desktop... (next to the "Apple" menu? it's been a while since I used a mac ) There you should find the "File", "Settings", "Window", "Help" menus displayed... Ohh (facepalm) how easy - iam new to mac. Thank you!!
|
|
|
I think its because of old hdd and small amount of ram (only 4 gb)?
Can I simply copy wallet.dat from old pc to my iMac (with SSD and 12 gb of ram) to make the process faster?
If you decided to do that, you should increase the database cache of Bitcoin core in your iMac to about 6GB to further increase the sync speed. The option is in " Settings->Options->Size of database cache" just below 'prune', setting it to 5722 should provide significant sync speed boost. You need to restart Core for the changes to take effect. Thanx! Ive installed latest Bitcoin qt to my iMac - but i cant find Settings->Options->Size option to set prune (instead of windows version, where its easy to find) there is only Summary, Send, Recieve, Transaction panel
|
|
|
This means that your wallet will still download the whole blockchain and verify it, but will save to HDD only the data it decides that you'll need for your wallet and transactions. (I am not sure it's an accurate definition, but it should give you an image) - as opposite to saving it all.
If the prune mode is enabled, only the last x blocks are kept in your HDD, so the size of data doesn't exceed a certain amount. Assume that prune=550 Bitcoin core downloads the first block, second block, third block and .... Once the size of data reaches 550 MB, the first block is removed from your HDD. Hi! Thank you for help and explanation of how prune works! Seems like everything working good ...But: Its been exactly 20 days when I start to download whole blockchain (its not downloading 24/7 but minimum 15 hours everyday and 24 hours during weekends) and Iam only on 44,44 % and its goes very very slow. I think its because of old hdd and small amount of ram (only 4 gb)? Can I simply copy wallet.dat from old pc to my iMac (with SSD and 12 gb of ram) to make the process faster? Or its not that easy? Thanx in advance
|
|
|
Thank you for answer now it start to make sense
But i dont understand: ,,Keep in mind that pruning still downloads all those 300GB (minus what you already have), hence it's still slow.,, - what is purpose of pruning then?
I only have about 200 gb of space or can I use external hdd?
|
|
|
Hi,
Yes, exactly, you understand it right.
Problem is I dont have enough space (now its about 6 years of blocks) and I need a guidance about pruning ( I use Bitcoin Core wallet)
I dont have private key of 1Cb5*
|
|
|
Thank you for answering!
Ill try to upgrade - it may help? May be its all because I dont have downloaded all blocks? (but it will take a lot of time and space because its about 6 years to download) Yes I use Blockchain.info and doublechecked the adress (as I said in transaction window the adress is correct) You are right I recieved 0,001 BTC I realise error immediately and reported it to Blockchain support - it took very long time to communicate with them, I spoke with 4 admins and after 6 mounths they said they cant help, so I try it here...
|
|
|
Dear users, please help me to find a solution to my problem. 17.7.2020 about 10:00 am CET I made a bitcoin transaction from my old wallet (Bitcoin QT V.0.8.5. beta) to new Blockchain.com wallet. I generate request link to my Blockchain wallet(19yXZeABqCEmYHx8mdL7JapvkfLLUXrFf1) doublecheked and send 0.04627068 BTC from my old wallet 1PxbkNHMKXxrZP8KnJTYaG64VwDnchr9ri. Link: https://www.blockchain.com/btc/address/1PxbkNHMKXxrZP8KnJTYaG64VwDnchr9ri And Instead of receiving 0,0451 btc ( 0.0462 - 0.0011(transaction fee)) I received only 0,0011 btc. In old wallet transaction window the adress is correct but instead, it was sent to 1Cb5Hk4FyY7wvTNkfZJCgdnCaj6tmgYh61 Also the transaction status is Unconfirmed. Please help me find the solution, I'll appreciate your help with an extra fee for you. P.s. I have all printscreens if you need. Thanx in advance
|
|
|
|