Hi guys, I have found a lot of people having problems with there AntMiner S4 and not getting proper hashing... When I first hooked up mine I was only getting 800ghs... This is how I fixed it.

https://www.youtube.com/edit?o=U&video_id=bdhjjHDA_wk     

Ok guys we are making some progress, I changed my DNS to my ISP which is DNS Address #1:   47.55.55.55 / DNS Address #2: 142.166.166.166... I changes my ip to 192.168.1.206... And It work for a min then crash. What should my ip be set at ?

Hi Everyone, I could really use some help.. I got my Bit Garden V2 about 6 days ago and I can't get it working. The RPI is hooked up right because I can get into the menus, The problem I think I'm having is my network setting. Can I get a pro to take a look at this picture and tell me what my settings should look like... PLEASE... Thank you very much

Hi Guys, I got my 2x btc garden v2 about 5 days ago and I am having a very hard time setting it up. Can you please help me... I got my RBP setup fine I can bring up the interface, I think I got the cables done correctly. I feel that I have the network settings wrong... Here is a picture of my network setting, can anyone tell me what my RBP Network setting should look like ?. .... Thank you
 

Need advice !

This question is more directed to the bitcoin miners. I have been Bit-coining for about 8 months now and I really enjoy doing it. The only problem is I'm not making any profit, long story short I have spent around $1500 and only made $ 500.00/ I have 4 miners pumping out 450 gh, and on a good day I might make .01 bt which means I will most likely never see a profit with my current set up... So here are my questions;

1) Is bit coin mining dead ?, should I though in the towel.
2) If it is not dead, should I buy a really big bitcoin miner $2000.00+, or lots of smaller ones ?.
3) What should I buy next and where should I buy them ?.

Thanks for the advice.

Can you guys please tell me where that manual reset switch/button on the Bitmain AntMiner S1 Dual Blade is ?. I went in the interface with 192.168.1.99 and changed my IP address, now I can't access the the devices interface at all. I need it reset back to its factory default.

-Thank you very much.   

OMG - Its working, you guys are the best for sticking with such a noob through the full setup process. ! I LOVE YOU GUYS.

Clearly I feel like a dumbass... But i'm still having problems... This is what I made for a .bat File = cd C:\Users\Mark\Desktop\mining_proxy.exe
mining_proxy.exe -o stratum.mining.eligius.st -p 8330 -q          .... Does that look correct ?

I think we might have found the problem... I thought since I am using Slush's pool, I didn't need to make a .bat file. Unless you are talking about the Proxy Sever Screen shots. Can you guys please e-mail...Mark.Cusack@gmail.com/ I don't feel comfortable with my IP settings out where everyone can see them.

Thanks guys. 

Yeah still no luck with the pool being = 192.168.1.201.

This is what my Wan router from my isp says =
WAN Connection Status
WAN Type:   Ethernet
Dynamic/Static:   Dynamic
Modem IP Address:   156.34.90.95
Subnet Mask:           255.255.252.0
Default Gateway:           156.34.88.1
Lease Time Remaining:   16M 24S
DNS Address #1:           47.55.55.55
DNS Address #2:          142.166.166.166

Do you guys think these setting are messing me up ?

Thank you for the help guys, I can't post pictures here for some reason so I will just type it out.

Here are my IP CONFIG Stats
IPv4 address 192.168.1.201 <Preferred>
Subnet Mask  255.255.255.0
Default Gateway 192.168.1.200
DHCP Server 192.168.1.200
dns servers 192.168.1.200

Here is my Cube inter face.
IP              192.168.1.254
Mask              255.255.255.0
Gateway      192.168.1.200
WEB Port           8000
Primary DNS   192.168.1.200
Secondary DNS   8.8.8.8
Pool ports           8330,8330
Pool addresses   192.168.1.200,192.168.1.200
Miners user:pass markcus.cube:1234,markcus.cube:1234   

Just a heads up, when I google search "Whats my IP" it comes back with 156.34.90.95.
Thank you once again for all your help.
-Markcus

Hi everyone... I love bit coining but I am not loving this Block Erupter Cube... I have been trying to set it up for 5 days, I got as far as entering my data into the cubes interface and running the proxy, but this is the errors I am getting =
08:09:40,259 info proxy client_service.handle_event # newjob ccd9 for prevhash a28087c3, clean_jobs=False

I think its my IP or Worker.... Please Help, I really want this to work.


-Mark

Hi Guys, that was great advice but I am stuck.... My IP = 156.34.90.95

I can get to stage 2, where I can get into the interface, I change my IP in the interface to 156.34.90.94... But I can't access the cube with the new ip 156.34.90.94:8000

Here are my stats just incase its a subnet problem...
156.34.90.95
Subnet Mask:   255.255.252.0
Default Gateway:   156.34.88.1


Can you please help me, I have been trying this for 3 days and getting nowhere.
Mark.cusack@gmail.com

Hi everyone... I got a quicky question, I am hashing at about 2.8 gh. In my Bitminer profile my bitcoins mined has not moved in 3 days yet the namecoins have go up.... Is this normal ?

PS; With GUIMiner I mine at .0002 bitcoins per day so I know its something to do with Bitminter.

-Thank you to anyone that can answer this.

Markcus