Latest posts of: kungen12321

Show Posts
Pages: [1] 2 3 4 »

Bitcoin / Mining support / S17Pro hashboard - no power

on: October 06, 2023, 09:44:53 PM

Hi! I am repairing a s17pro hashboard. On domain 4 I dont have power, 0.8v but not 1.8v. Were to continue the diagnostic to find the problem? Thanks in advance!

Bitcoin / Mining support / Re: Repaired s17Pro hashboard - eeprom error

on: October 06, 2023, 09:38:26 PM

Quote from: BitMaxz on October 06, 2023, 05:09:17 PM Quote from: kungen12321 on October 05, 2023, 10:48:57 AM For example, I see that I dont know the different between the eeprom and pic file. They are different according to the Zeusbtc below the hashboard has a PIC chip and EEPROM chip so maybe yes you need to restore a pic file but the problem is do you have a working pic file? ZeusBTC is selling pic files in a package, not by piece. However, I don't think the issue is the pic firmware the error is pointing to EEPROM so maybe the file you read from another hashboard might also have corrupted EEPROM you need to find a known working hashboard to read the EEPROM and flash it to these hashboard. - https://www.zeusbtc.com/articles/asic-miner-troubleshooting/3591-how-many-types-of-chips-are-on-the-antminer-s17-pro-hash-board Thanks, that helped alot!

Bitcoin / Mining support / Re: Repaired s17Pro hashboard - eeprom error

on: October 06, 2023, 04:50:57 AM

Maybe somebody have a clue?

Bitcoin / Mining support / Re: Repaired s17Pro hashboard - eeprom error

on: October 05, 2023, 10:48:57 AM

Quote from: BitMaxz on October 04, 2023, 11:00:37 PM The error might be an incompatibility issue since you said the EEPROM you flashed came from another unit am I right? It won't work you need an EEPROM that came from another dashboard but on the same unit. The hashboard must be synced if the serial numbers are different the control board won't recognize it. There is a way to bypass this if you don't have Eeprom backup on that unit. To bypass this you need to boot this unit with Braiins OS. I will explain from the start. I have started to repair my own hashingboards. After many hours of testing and learning, I start to see some results. I now have 3 s17PRO hashboards that find all the chips. I use the chinese universal antminer test fixture. You have different files on sd card`s that you need to put in the test fixture depending on the hashboard model. I use Braiins and have put in one card at the time in the miner to see if the card works. But with all repaired boards I get this eeprom message in the kernel log. I read something that the test fixture overwrite the eeprom or maybe it was the pic file on the board, and you need to restore it again after repaired the board. Is that right. I have pickit 3.5 and the antminer code editor. What do I need to do so the miner recognize and start to hash with the repaired boards. For example, I see that I dont know the different between the eeprom and pic file. Thanks in advance! /Magnus

Bitcoin / Mining support / Repaired s17Pro hashboard - eeprom error

on: October 04, 2023, 09:34:47 PM

Hi! I repaired a s17Pro hashboard but now I get this error message in the kernel log. "autodetection failed, no hashboard eeproms`s have been parsed" Failed to detect miner type from eeproms" Error: cannot detect mining hardware I have the universal black antminer test fixture. I have tried to add another eeprom file from another s17Pro board with my code editor. But no progress. What can be wrong? Thanks in advance! /Magnus

Bitcoin / Mining software (miners) / Re: Recommended chip temperature - Antminer 17 serie?

on: June 11, 2023, 01:01:50 PM

Quote from: Andartis on June 10, 2023, 12:48:36 PM If you have the stock heatsinks, i would keep them below 85°C. You will risk the heatsinks and or chips falling off. Thanks for that advice!

Bitcoin / Mining software (miners) / Re: Recommended chip temperature - Antminer 17 serie?

on: June 08, 2023, 06:58:10 PM

Quote from: philipma1957 on June 08, 2023, 12:02:32 AM Quote from: kungen12321 on June 06, 2023, 09:06:07 PM I run with Bariin's software and have the following settings for my antminer 17 series miners. In this case S17PRO, T17+ and S17+ miners. Temp mode: auto Target 75c Hot 85c Dangerous92c Can't find any information from Bitmain about recommended chip temperatures for 17 serie only for PCB. What do you guys have for temp settings and what is working for you? Thanks in advance! Do 72c 80c 85c it is safer That is really cold. Will be hard during summer season. Any advice to keep them running cold except maintenance ofcource?

Bitcoin / Mining software (miners) / Re: Recommended chip temperature - Antminer 17 serie?

on: June 08, 2023, 06:55:24 PM

Quote from: BitMaxz on June 07, 2023, 09:06:50 PM I tried to search on Google but you can only find PCB temp for this unit. Also tried to search for the BM1397 datasheet but no one share it yet. I think the Asic chip max temp for the 17 series is usually around 110c-135c. My suggestion is better run it in auto mode instead of running it in manual mode because if you set it near the max temp you just likely frying your chips to death. And it is always better to keep them cool. I also tried to find information about these chips BM1397 and their max temperature, but it was impossible. Thanks for the advice! I send Bitmain an email but still no answer.

Bitcoin / Mining software (miners) / Re: Braiins OS+ support thread

on: June 07, 2023, 06:25:11 AM

On the stock antminer firmware, you can see the 4 temperature reading on the card. With Braiins I can only see the hottest. Why so?

Bitcoin / Mining software (miners) / Re: Braiins OS+ support thread

on: June 07, 2023, 06:15:05 AM

Quote from: Artemis3 on June 06, 2023, 10:25:27 PM You can delete those values, then Save & Apply, and it will restore defaults. Okay, I will do that. To see what the defaults are.

Bitcoin / Mining software (miners) / Re: Braiins OS+ support thread

on: June 06, 2023, 09:10:15 PM

I run with Bariin's software and have the following temp. settings for my antminer 17 series miners. In this case S17PRO, T17+ and S17+ miners. Temp mode: auto Target 75c Hot 85c Dangerous92c Can't find any information from Bitmain about recommended chip temperatures for 17 serie only for PCB. Does Braiins have any temp. recommendations or people in this thread?

Bitcoin / Mining software (miners) / Recommended chip temperature - Antminer 17 serie?

on: June 06, 2023, 09:06:07 PM

I run with Bariin's software and have the following settings for my antminer 17 series miners. In this case S17PRO, T17+ and S17+ miners. Temp mode: auto Target 75c Hot 85c Dangerous92c Can't find any information from Bitmain about recommended chip temperatures for 17 serie only for PCB. What do you guys have for temp settings and what is working for you? Thanks in advance!

Alternate cryptocurrencies / Mining (Altcoins) / Re: Goldshell KD5 - doesnt start hashing

on: May 11, 2023, 10:07:21 AM

I have downgraded and now Contacted them. They said it was a problem with my PSU. I bought a new one, but still the same problem, the miner doesn`t start hash.

Alternate cryptocurrencies / Mining (Altcoins) / Re: ibelink firmware - how to tune BM-K1+?

on: May 10, 2023, 05:24:36 PM

No one has experience of this miner or brand?

Alternate cryptocurrencies / Mining (Altcoins) / Re: Goldshell KD5 - doesnt start hashing

on: May 10, 2023, 05:23:49 PM

No one has a clue?

Alternate cryptocurrencies / Mining (Altcoins) / Re: Goldshell KD5 - doesnt start hashing

on: May 10, 2023, 07:01:48 AM

MINERSYSLOG [2023-05-10 14:57:04] C2: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:57:05] C2: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:57:05] C2: flushing works==> [2023-05-10 14:57:08] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:08] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:08] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:08] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:08] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:08] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:08] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:08] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:13] watchdog dev0: read cpb voltage to 30720 success. [2023-05-10 14:57:13] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:13] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:13] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:13] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:13] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:13] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:13] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:18] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:19] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:19] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:19] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:19] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:19] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:19] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:19] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:23] C3: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:57:23] C3: gsk5_reinit [2023-05-10 14:57:23] C3: gsk5_device_init... [2023-05-10 14:57:24] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:24] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:24] watchdog dev1: read cpb voltage to 180 success. [2023-05-10 14:57:24] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:24] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:24] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:24] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:24] C3: WatchDog Exit for CPB Idle... [2023-05-10 14:57:24] C3: Auto addressing failed [2023-05-10 14:57:25] C3: Auto addressing failed [2023-05-10 14:57:25] Stratum from pool 0 detected new block [2023-05-10 14:57:25] C2: flushing works==> [2023-05-10 14:57:25] C1: flushing works==> [2023-05-10 14:57:25] C0: flushing works==> [2023-05-10 14:57:26] C3: Auto addressing failed [2023-05-10 14:57:27] C3: Auto addressing failed [2023-05-10 14:57:27] C3: Auto addressing failed [2023-05-10 14:57:27] C3: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:57:27] C0: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:57:27] C0: gsk5_reinit [2023-05-10 14:57:27] C0: gsk5_device_init... [2023-05-10 14:57:28] C3: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:57:28] C3: flushing works==> [2023-05-10 14:57:28] C0: Auto addressing failed [2023-05-10 14:57:29] C1: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:57:29] C1: gsk5_reinit [2023-05-10 14:57:29] C1: gsk5_device_init... [2023-05-10 14:57:29] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:29] C0: WatchDog Exit for CPB Idle... [2023-05-10 14:57:29] C0: Auto addressing failed [2023-05-10 14:57:29] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:29] C1: WatchDog Exit for CPB Idle... [2023-05-10 14:57:29] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:29] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:29] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:29] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:30] C1: Auto addressing failed [2023-05-10 14:57:30] C0: Auto addressing failed [2023-05-10 14:57:30] Stratum connection to pool 0 interrupted [2023-05-10 14:57:30] C2: flushing works==> [2023-05-10 14:57:30] Pool 0 stratum+tcp://kda.ss.dxpool.com:6611 not responding! [2023-05-10 14:57:30] C3: flushing works==> [2023-05-10 14:57:30] C1: Auto addressing failed [2023-05-10 14:57:31] C0: Auto addressing failed [2023-05-10 14:57:31] C1: Auto addressing failed [2023-05-10 14:57:31] C0: Auto addressing failed [2023-05-10 14:57:31] C0: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:57:32] Pool 0 stratum difficulty set to 30000 [2023-05-10 14:57:32] Stratum from pool 0 detected new block [2023-05-10 14:57:32] C3: flushing works==> [2023-05-10 14:57:32] C2: flushing works==> [2023-05-10 14:57:32] C0: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:57:32] C0: flushing works==> [2023-05-10 14:57:32] C1: Auto addressing failed [2023-05-10 14:57:33] C1: Auto addressing failed [2023-05-10 14:57:33] C1: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:57:33] C1: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:57:33] C1: flushing works==> [2023-05-10 14:57:34] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:34] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:34] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:34] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:34] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:34] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:35] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:35] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:40] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:40] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:40] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:40] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:40] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:40] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:40] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:40] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:45] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:45] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:45] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:45] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:45] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:45] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:45] watchdog dev3: read cpb voltage to 190 success. [2023-05-10 14:57:45] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:47] Stratum from pool 0 detected new block [2023-05-10 14:57:47] C0: flushing works==> [2023-05-10 14:57:47] C2: flushing works==> [2023-05-10 14:57:47] C1: flushing works==> [2023-05-10 14:57:47] C3: flushing works==> [2023-05-10 14:57:50] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:50] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:50] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:50] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:50] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:50] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:50] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:50] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:54] C2: flushing works==> [2023-05-10 14:57:54] C0: flushing works==> [2023-05-10 14:57:54] C1: flushing works==> [2023-05-10 14:57:54] Stratum from pool 0 detected new block [2023-05-10 14:57:54] C3: flushing works==> [2023-05-10 14:57:55] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:57:55] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:56] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:57:56] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:56] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:57:56] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:57:56] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:57:56] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:01] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:01] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:01] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:01] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:01] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:01] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:01] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:01] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:03] C0: flushing works==> [2023-05-10 14:58:03] Stratum from pool 0 detected new block [2023-05-10 14:58:03] C3: flushing works==> [2023-05-10 14:58:03] C1: flushing works==> [2023-05-10 14:58:03] C2: flushing works==> [2023-05-10 14:58:05] C2: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:58:05] C2: gsk5_reinit [2023-05-10 14:58:05] C2: gsk5_device_init... [2023-05-10 14:58:06] C2: Auto addressing failed [2023-05-10 14:58:06] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:06] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:06] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:06] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:06] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:06] C2: WatchDog Exit for CPB Idle... [2023-05-10 14:58:06] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:06] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:06] C2: Auto addressing failed [2023-05-10 14:58:07] C0: flushing works==> [2023-05-10 14:58:07] Stratum from pool 0 detected new block [2023-05-10 14:58:07] C1: flushing works==> [2023-05-10 14:58:07] C3: flushing works==> [2023-05-10 14:58:07] C2: Auto addressing failed [2023-05-10 14:58:08] C2: Auto addressing failed [2023-05-10 14:58:08] C0: flushing works==> [2023-05-10 14:58:08] C3: flushing works==> [2023-05-10 14:58:08] Stratum from pool 0 detected new block [2023-05-10 14:58:08] C1: flushing works==> [2023-05-10 14:58:09] C2: Auto addressing failed [2023-05-10 14:58:09] C2: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:58:09] C2: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:58:09] C2: flushing works==> [2023-05-10 14:58:11] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:11] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:11] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:11] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:11] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:11] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:12] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:12] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:17] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:17] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:17] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:17] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:17] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:17] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:17] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:17] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:22] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:22] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:22] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:22] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:22] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:22] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:22] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:22] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:24] C0: flushing works==> [2023-05-10 14:58:24] C3: flushing works==> [2023-05-10 14:58:24] Stratum from pool 0 detected new block [2023-05-10 14:58:24] C2: flushing works==> [2023-05-10 14:58:24] C1: flushing works==> [2023-05-10 14:58:27] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:27] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:27] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:27] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:27] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:27] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:27] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:27] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:28] C3: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:58:28] C3: gsk5_reinit [2023-05-10 14:58:28] C3: gsk5_device_init... [2023-05-10 14:58:29] C3: Auto addressing failed [2023-05-10 14:58:30] C3: Auto addressing failed [2023-05-10 14:58:30] C3: Auto addressing failed [2023-05-10 14:58:31] C3: Auto addressing failed [2023-05-10 14:58:32] C3: Auto addressing failed [2023-05-10 14:58:32] C3: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:58:32] C0: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:58:32] C0: gsk5_reinit [2023-05-10 14:58:32] C0: gsk5_device_init... [2023-05-10 14:58:32] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:32] C0: WatchDog Exit for CPB Idle... [2023-05-10 14:58:32] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:32] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:33] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:33] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:33] C3: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:58:33] C3: flushing works==> [2023-05-10 14:58:33] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:33] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:33] C0: Auto addressing failed [2023-05-10 14:58:33] C1: !!!Get 0 Nonces in past 60 second, Try reboot dev!!! [2023-05-10 14:58:33] C1: gsk5_reinit [2023-05-10 14:58:33] C1: gsk5_device_init... [2023-05-10 14:58:34] C0: Auto addressing failed [2023-05-10 14:58:34] C1: set vout failed. [2023-05-10 14:58:35] C0: Auto addressing failed [2023-05-10 14:58:35] C1: set watchdog enable failed. [2023-05-10 14:58:36] C0: Auto addressing failed [2023-05-10 14:58:36] C1: set watchdog enable failed. [2023-05-10 14:58:38] C0: set watchdog enable failed. [2023-05-10 14:58:38] C0: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:58:38] C1: Auto addressing failed [2023-05-10 14:58:38] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:38] C0: WatchDog Exit for CPB Idle... [2023-05-10 14:58:38] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:38] C1: WatchDog Exit for CPB Idle... [2023-05-10 14:58:38] C0: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:58:38] C0: flushing works==> [2023-05-10 14:58:38] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:38] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:38] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:38] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:38] C1: set watchdog time failed. [2023-05-10 14:58:38] C1: Init failed 5 Times, Try reboot later!!! [2023-05-10 14:58:39] C1: K5 scan time is 16.00s@840.00MHz [2023-05-10 14:58:39] C1: flushing works==> [2023-05-10 14:58:42] C0: flushing works==> [2023-05-10 14:58:42] Stratum from pool 0 detected new block [2023-05-10 14:58:42] C3: flushing works==> [2023-05-10 14:58:42] C2: flushing works==> [2023-05-10 14:58:42] C1: flushing works==> [2023-05-10 14:58:43] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:43] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:43] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:43] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:43] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:43] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:44] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:44] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:49] watchdog dev0: read cpb voltage to 50 success. [2023-05-10 14:58:49] C0: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:49] watchdog dev1: read cpb voltage to 50 success. [2023-05-10 14:58:49] C1: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:49] watchdog dev2: read cpb voltage to 50 success. [2023-05-10 14:58:49] C2: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:49] watchdog dev3: read cpb voltage to 50 success. [2023-05-10 14:58:49] C3: Read TV_ACCESS MAX Failed... [2023-05-10 14:58:52] C1: flushing works==> [2023-05-10 14:58:52] Stratum from pool 0 detected new block [2023-05-10 14:58:52] C2: flushing works==> [2023-05-10 14:58:52] C0: flushing works==> [2023-05-10 14:58:52] C3: flushing works==>

Alternate cryptocurrencies / Mining (Altcoins) / Re: Goldshell KD5 - doesnt start hashing

on: May 10, 2023, 07:00:17 AM

Monitor [2023-05-10 14:50:52] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:50:52] [Xminerd] fan0:(80, 4920) fan1:(80, 4980) fan2:(80, 5040) fan3:(80, 5100) . fan status: 0 [2023-05-10 14:50:52] [Xminerd] NCF(0,1,0) [2023-05-10 14:50:55] Start check net state... [2023-05-10 14:50:55] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:50:55] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:50:55] [Xminerd] NCF(0,1,0) [2023-05-10 14:50:58] Start check net state... [2023-05-10 14:50:58] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:50:58] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:50:58] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:01] Start check net state... [2023-05-10 14:51:01] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:01] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:01] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:04] Start check net state... [2023-05-10 14:51:04] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:04] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:04] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:07] Start check net state... [2023-05-10 14:51:07] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:07] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:07] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:10] Start check net state... [2023-05-10 14:51:10] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:10] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:10] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:14] Start check net state... [2023-05-10 14:51:14] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:14] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:14] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:17] Start check net state... [2023-05-10 14:51:17] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:17] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:17] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:20] Start check net state... [2023-05-10 14:51:20] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:20] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:20] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:23] Start check net state... [2023-05-10 14:51:23] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:23] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:23] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:26] Start check net state... [2023-05-10 14:51:26] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:26] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:26] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:29] Start check net state... [2023-05-10 14:51:29] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:29] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:29] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:32] Start check net state... [2023-05-10 14:51:32] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:32] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:32] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:35] Start check net state... [2023-05-10 14:51:35] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:35] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:35] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:38] Start check net state... [2023-05-10 14:51:38] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:38] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:38] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:41] Start check net state... [2023-05-10 14:51:41] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:41] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:41] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:44] Start check net state... [2023-05-10 14:51:45] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:45] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:45] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:48] Start check net state... [2023-05-10 14:51:48] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:48] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:48] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:51] Start check net state... [2023-05-10 14:51:51] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:51] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:51] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:54] Start check net state... [2023-05-10 14:51:54] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:54] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:54] [Xminerd] NCF(0,1,0) [2023-05-10 14:51:57] Start check net state... [2023-05-10 14:51:57] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:51:57] [Xminerd] fan0:(80, 4800) fan1:(80, 4800) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:51:57] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:00] Start check net state... [2023-05-10 14:52:00] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:00] [Xminerd] fan0:(80, 5100) fan1:(80, 5100) fan2:(80, 5220) fan3:(80, 5100) . fan status: 0 [2023-05-10 14:52:00] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:03] Start check net state... [2023-05-10 14:52:03] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:03] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:03] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:06] Start check net state... [2023-05-10 14:52:06] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:06] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:06] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:09] Start check net state... [2023-05-10 14:52:09] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:09] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:09] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:12] Start check net state... [2023-05-10 14:52:12] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:12] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:12] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:15] Start check net state... [2023-05-10 14:52:15] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:15] [Xminerd] fan0:(80, 4920) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:15] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:19] Start check net state... [2023-05-10 14:52:19] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:19] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:19] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:22] Start check net state... [2023-05-10 14:52:22] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:22] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:22] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:25] Start check net state... [2023-05-10 14:52:25] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:25] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:25] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:28] Start check net state... [2023-05-10 14:52:28] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:28] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:28] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:31] Start check net state... [2023-05-10 14:52:31] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:31] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:31] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:34] Start check net state... [2023-05-10 14:52:34] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:34] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:34] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:37] Start check net state... [2023-05-10 14:52:37] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:37] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:37] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:40] Start check net state... [2023-05-10 14:52:40] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:40] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:40] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:43] Start check net state... [2023-05-10 14:52:43] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:43] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:43] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:46] Start check net state... [2023-05-10 14:52:46] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:46] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:46] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:50] Start check net state... [2023-05-10 14:52:50] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:50] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:50] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:53] Start check net state... [2023-05-10 14:52:53] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:53] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:53] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:56] Start check net state... [2023-05-10 14:52:56] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:52:56] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:52:56] [Xminerd] NCF(0,1,0) [2023-05-10 14:52:59] Start check net state... [2023-05-10 14:53:00] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:00] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:00] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:03] Start check net state... [2023-05-10 14:53:03] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:03] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:03] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:06] Start check net state... [2023-05-10 14:53:06] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:06] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4800) . fan status: 0 [2023-05-10 14:53:06] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:09] Start check net state... [2023-05-10 14:53:09] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:09] [Xminerd] fan0:(80, 4800) fan1:(80, 4800) fan2:(80, 4800) fan3:(80, 4800) . fan status: 0 [2023-05-10 14:53:09] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:12] Start check net state... [2023-05-10 14:53:12] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:12] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:12] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:15] Start check net state... [2023-05-10 14:53:15] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:15] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:15] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:18] Start check net state... [2023-05-10 14:53:18] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:18] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:18] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:21] Start check net state... [2023-05-10 14:53:21] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:21] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:21] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:24] Start check net state... [2023-05-10 14:53:24] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:24] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:24] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:27] Start check net state... [2023-05-10 14:53:27] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:27] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:27] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:31] Start check net state... [2023-05-10 14:53:31] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:31] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:31] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:34] Start check net state... [2023-05-10 14:53:34] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:34] [Xminerd] fan0:(80, 4920) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:34] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:37] Start check net state... [2023-05-10 14:53:37] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:37] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:37] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:40] Start check net state... [2023-05-10 14:53:40] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:40] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:40] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:43] Start check net state... [2023-05-10 14:53:43] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:43] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:43] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:46] Start check net state... [2023-05-10 14:53:46] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:46] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:46] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:49] Start check net state... [2023-05-10 14:53:49] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:49] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:49] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:52] Start check net state... [2023-05-10 14:53:52] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:52] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:52] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:55] Start check net state... [2023-05-10 14:53:55] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:55] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:55] [Xminerd] NCF(0,1,0) [2023-05-10 14:53:58] Start check net state... [2023-05-10 14:53:58] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:53:58] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:53:58] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:01] Start check net state... [2023-05-10 14:54:02] kda.ss.dxpool.com [18.184.82.43] 6611 open [2023-05-10 14:54:02] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:02] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:05] Start check net state... [2023-05-10 14:54:05] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:05] [Xminerd] fan0:(80, 4920) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:05] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:08] Start check net state... [2023-05-10 14:54:08] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:08] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:08] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:11] Start check net state... [2023-05-10 14:54:11] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:11] [Xminerd] fan0:(80, 4920) fan1:(80, 4920) fan2:(80, 4980) fan3:(80, 4920) . fan status: 0 [2023-05-10 14:54:11] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:14] Start check net state... [2023-05-10 14:54:14] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:14] [Xminerd] fan0:(80, 4980) fan1:(80, 5040) fan2:(80, 4980) fan3:(80, 4920) . fan status: 0 [2023-05-10 14:54:14] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:17] Start check net state... [2023-05-10 14:54:17] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:17] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:17] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:20] Start check net state... [2023-05-10 14:54:20] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:20] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:20] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:23] Start check net state... [2023-05-10 14:54:23] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:23] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:23] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:26] Start check net state... [2023-05-10 14:54:26] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:26] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:26] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:29] Start check net state... [2023-05-10 14:54:30] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:30] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:30] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:33] Start check net state... [2023-05-10 14:54:33] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:33] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:33] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:36] Start check net state... [2023-05-10 14:54:36] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:36] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:36] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:39] Start check net state... [2023-05-10 14:54:39] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:39] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:39] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:42] Start check net state... [2023-05-10 14:54:42] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:42] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:42] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:45] Start check net state... [2023-05-10 14:54:45] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:45] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4800) . fan status: 0 [2023-05-10 14:54:45] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:48] Start check net state... [2023-05-10 14:54:48] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:48] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:48] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:51] Start check net state... [2023-05-10 14:54:51] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:51] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:51] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:54] Start check net state... [2023-05-10 14:54:54] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:54] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:54] [Xminerd] NCF(0,1,0) [2023-05-10 14:54:57] Start check net state... [2023-05-10 14:54:57] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:54:57] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:54:57] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:00] Start check net state... [2023-05-10 14:55:00] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:00] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:00] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:04] Start check net state... [2023-05-10 14:55:04] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:04] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:04] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:07] Start check net state... [2023-05-10 14:55:07] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:07] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:07] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:10] Start check net state... [2023-05-10 14:55:10] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:10] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:10] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:13] Start check net state... [2023-05-10 14:55:13] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:13] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:13] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:16] Start check net state... [2023-05-10 14:55:16] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:16] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:16] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:19] Start check net state... [2023-05-10 14:55:19] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:19] [Xminerd] fan0:(80, 4920) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4920) . fan status: 0 [2023-05-10 14:55:19] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:22] Start check net state... [2023-05-10 14:55:22] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:22] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4920) . fan status: 0 [2023-05-10 14:55:22] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:25] Start check net state... [2023-05-10 14:55:25] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:25] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:25] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:28] Start check net state... [2023-05-10 14:55:28] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:28] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:28] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:31] Start check net state... [2023-05-10 14:55:31] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:31] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:31] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:35] Start check net state... [2023-05-10 14:55:35] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:35] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:35] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:38] Start check net state... [2023-05-10 14:55:38] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:38] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:38] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:41] Start check net state... [2023-05-10 14:55:41] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:41] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:41] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:44] Start check net state... [2023-05-10 14:55:44] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:44] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:44] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:47] Start check net state... [2023-05-10 14:55:47] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:47] [Xminerd] fan0:(80, 4800) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:47] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:50] Start check net state... [2023-05-10 14:55:50] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:50] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:50] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:53] Start check net state... [2023-05-10 14:55:53] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:53] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:53] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:56] Start check net state... [2023-05-10 14:55:56] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:56] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:56] [Xminerd] NCF(0,1,0) [2023-05-10 14:55:59] Start check net state... [2023-05-10 14:55:59] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:55:59] [Xminerd] fan0:(80, 4920) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:55:59] [Xminerd] NCF(0,1,0) [2023-05-10 14:56:02] Start check net state... [2023-05-10 14:56:02] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:56:02] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:56:02] [Xminerd] NCF(0,1,0) [2023-05-10 14:56:06] Start check net state... [2023-05-10 14:56:06] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:56:06] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:56:06] [Xminerd] NCF(0,1,0) [2023-05-10 14:56:09] Start check net state... [2023-05-10 14:56:09] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:56:09] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:56:09] [Xminerd] NCF(0,1,0) [2023-05-10 14:56:12] Start check net state... [2023-05-10 14:56:12] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:56:12] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:56:12] [Xminerd] NCF(0,1,0) [2023-05-10 14:56:15] Start check net state... [2023-05-10 14:56:15] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:56:15] [Xminerd] fan0:(80, 4860) fan1:(80, 4860) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:56:15] [Xminerd] NCF(0,1,0) [2023-05-10 14:56:18] Start check net state... [2023-05-10 14:56:18] kda.ss.dxpool.com [3.67.32.208] 6611 open [2023-05-10 14:56:18] [Xminerd] fan0:(80, 4860) fan1:(80, 4920) fan2:(80, 4860) fan3:(80, 4860) . fan status: 0 [2023-05-10 14:56:18] [Xminerd] NCF(0,1,0)

Alternate cryptocurrencies / Mining (Altcoins) / Re: Goldshell KD5 - doesnt start hashing

on: May 10, 2023, 06:58:06 AM

SYSLOG [2023-05-10 14:33:53] Get Hshistory By Socket Error [2023-05-10 14:33:54] Socket connect failed: Connection refused [2023-05-10 14:33:54] Exec dev By Socket Error [2023-05-10 14:33:54] Get Pools Config Error [2023-05-10 14:33:54] Socket connect failed: Connection refused [2023-05-10 14:33:54] Get Hshistory By Socket Error [2023-05-10 14:33:55] Get Pools Config Error [2023-05-10 14:33:55] Socket connect failed: Connection refused [2023-05-10 14:33:55] Get Hshistory By Socket Error [2023-05-10 14:33:56] Socket connect failed: Connection refused [2023-05-10 14:33:56] Exec dev By Socket Error [2023-05-10 14:33:56] Get Pools Config Error [2023-05-10 14:33:56] Socket connect failed: Connection refused [2023-05-10 14:33:56] Get Hshistory By Socket Error [2023-05-10 14:33:57] Get Pools Config Error [2023-05-10 14:33:57] Socket connect failed: Connection refused [2023-05-10 14:33:57] Get Hshistory By Socket Error [2023-05-10 14:33:58] { [2023-05-10 14:33:58] "api-listen": true, [2023-05-10 14:33:58] "api-allow": "W:127.0.0.1,A:0/0", [2023-05-10 14:33:58] "malgo": "blake2s", [2023-05-10 14:33:58] "text-only": true, [2023-05-10 14:33:58] "skip-security-checks": 100, [2023-05-10 14:33:58] "set": [ [2023-05-10 14:33:58] "intchains_qomo:vfff=0.430000:840:100:100", [2023-05-10 14:33:58] "intchains_qomo:algo=blake2s(KDA)" [2023-05-10 14:33:58] ], [2023-05-10 14:33:58] "pools": [ [2023-05-10 14:33:58] { [2023-05-10 14:33:58] "url": "stratum+tcp://kda.ss.dxpool.com:6611", [2023-05-10 14:33:58] "user": "kungen12321.KD5", [2023-05-10 14:33:58] "pass": "123", [2023-05-10 14:33:58] "pool-priority": 0 [2023-05-10 14:33:58] } [2023-05-10 14:33:58] ] [2023-05-10 14:33:58] } [2023-05-10 14:33:58] [ [2023-05-10 14:33:58] { [2023-05-10 14:33:58] "legal": true, [2023-05-10 14:33:58] "url": "stratum+tcp://kda.ss.dxpool.com:6611", [2023-05-10 14:33:58] "dragid": 0, [2023-05-10 14:33:58] "active": false, [2023-05-10 14:33:58] "user": "kungen12321.KD5", [2023-05-10 14:33:58] "pass": "123", [2023-05-10 14:33:58] "pool-priority": 0 [2023-05-10 14:33:58] } [2023-05-10 14:33:58] ] [2023-05-10 14:33:58] Socket connect failed: Connection refused [2023-05-10 14:33:58] Exec dev By Socket Error [2023-05-10 14:33:58] Socket connect failed: Connection refused [2023-05-10 14:33:58] Get Hshistory By Socket Error [2023-05-10 14:33:58] Socket connect failed: Connection refused [2023-05-10 14:33:58] Get Pool Name By Socket Error [2023-05-10 14:33:58] Get Pools Status Error [2023-05-10 14:33:59] Socket connect failed: Connection refused [2023-05-10 14:33:59] Get Hshistory By Socket Error [2023-05-10 14:33:59] Socket connect failed: Connection refused [2023-05-10 14:33:59] Get Pool Name By Socket Error [2023-05-10 14:33:59] Get Pools Status Error [2023-05-10 14:34:00] Socket connect failed: Connection refused [2023-05-10 14:34:00] Exec dev By Socket Error [2023-05-10 14:34:00] Socket connect failed: Connection refused [2023-05-10 14:34:00] Get Hshistory By Socket Error [2023-05-10 14:34:00] Socket connect failed: Connection refused [2023-05-10 14:34:00] Get Pool Name By Socket Error [2023-05-10 14:34:00] Get Pools Status Error [2023-05-10 14:34:01] Socket connect failed: Connection refused [2023-05-10 14:34:01] Get Hshistory By Socket Error [2023-05-10 14:34:01] Socket connect failed: Connection refused [2023-05-10 14:34:01] Get Pool Name By Socket Error [2023-05-10 14:34:01] Get Pools Status Error [2023-05-10 14:34:02] ===>[find.goldshell.com/api/miners:443] { [2023-05-10 14:34:02] "miner": "Goldshell-KD5", [2023-05-10 14:34:02] "MAC": "28:E2:97:5C:31:02", [2023-05-10 14:34:02] "IP": "192.168.8.189", [2023-05-10 14:34:02] "SN": "SN-unknown" [2023-05-10 14:34:02] } [2023-05-10 14:34:02] Socket connect failed: Connection refused [2023-05-10 14:34:02] Get Hshistory By Socket Error [2023-05-10 14:34:02] Socket connect failed: Connection refused [2023-05-10 14:34:02] Get Pool Name By Socket Error [2023-05-10 14:34:02] Get Pools Status Error [2023-05-10 14:34:03] <===[find.goldshell.com] Recv [{"status":"ok"}] [2023-05-10 14:34:03] Socket connect failed: Connection refused [2023-05-10 14:34:03] Exec dev By Socket Error [2023-05-10 14:34:03] Socket connect failed: Connection refused [2023-05-10 14:34:03] Get Hshistory By Socket Error [2023-05-10 14:34:03] Socket connect failed: Connection refused [2023-05-10 14:34:03] Get Pool Name By Socket Error [2023-05-10 14:34:03] Get Pools Status Error [2023-05-10 14:34:03] Get Tutorial Settings [2023-05-10 14:34:03] Open File /mnt/config/minerd/settings/.tutorial.json Error [2023-05-10 14:34:04] Socket connect failed: Connection refused [2023-05-10 14:34:04] Get Hshistory By Socket Error [2023-05-10 14:34:04] Socket connect failed: Connection refused [2023-05-10 14:34:04] Get Pool Name By Socket Error [2023-05-10 14:34:04] Get Pools Status Error [2023-05-10 14:34:05] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:0.000000 acc:0.000000) target_temp:85°C [2023-05-10 14:34:05] mhs 0.000000 [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback: continue [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback: continue [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback, wait [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback, wait [2023-05-10 14:34:11] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:0.000000 acc:0.000000) target_temp:85°C [2023-05-10 14:34:17] ===>[find.goldshell.com/api/miners:443] { [2023-05-10 14:34:17] "miner": "Goldshell-KD5", [2023-05-10 14:34:17] "MAC": "28:E2:97:5C:31:02", [2023-05-10 14:34:17] "IP": "192.168.8.189", [2023-05-10 14:34:17] "SN": "SN-unknown" [2023-05-10 14:34:17] } [2023-05-10 14:34:18] <===[find.goldshell.com] Recv [{"status":"ok"}] [2023-05-10 14:34:18] Fans Change (fan0: 100 ==> 99) (fan1: 100 ==> 99) (fan2: 100 ==> 99) (fan3: 100 ==> 99) reason(t:0.000000 acc:0.000000) target_temp:85°C [2023-05-10 14:34:24] Fans Change (fan0: 100 ==> 99) (fan1: 100 ==> 99) (fan2: 100 ==> 99) (fan3: 100 ==> 99) reason(t:0.000000 acc:0.000000) target_temp:85°C [2023-05-10 14:34:30] ===>[find.goldshell.com/api/miners:443] { [2023-05-10 14:34:30] "miner": "Goldshell-KD5", [2023-05-10 14:34:30] "MAC": "28:E2:97:5C:31:02", [2023-05-10 14:34:30] "IP": "192.168.8.189", [2023-05-10 14:34:30] "SN": "SN-unknown" [2023-05-10 14:34:30] } [2023-05-10 14:34:31] <===[find.goldshell.com] Recv [{"status":"ok"}] [2023-05-10 14:34:31] Fans Change (fan0: 100 ==> 99) (fan1: 100 ==> 99) (fan2: 100 ==> 99) (fan3: 100 ==> 99) reason(t:0.000000 acc:0.000000) target_temp:85°C [2023-05-10 14:34:37] Failed to get temperatures!! [2023-05-10 14:34:37] Fans Change (fan0: 99 ==> 98) (fan1: 99 ==> 98) (fan2: 99 ==> 98) (fan3: 99 ==> 98) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:34:43] ===>[find.goldshell.com/api/miners:443] { [2023-05-10 14:34:43] "miner": "Goldshell-KD5", [2023-05-10 14:34:43] "MAC": "28:E2:97:5C:31:02", [2023-05-10 14:34:43] "IP": "192.168.8.189", [2023-05-10 14:34:43] "SN": "SN-unknown" [2023-05-10 14:34:43] } [2023-05-10 14:34:45] <===[find.goldshell.com] Recv [{"status":"ok"}] [2023-05-10 14:34:45] Failed to get temperatures!! [2023-05-10 14:34:45] Fans Change (fan0: 98 ==> 97) (fan1: 98 ==> 97) (fan2: 98 ==> 97) (fan3: 98 ==> 97) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:34:48] Websocket Manager: Pools Status Websocket [2023-05-10 14:34:48] ======> mcb_websocket_manager_callback, wait [2023-05-10 14:34:48] temp_target is not array [2023-05-10 14:34:51] Failed to get temperatures!! [2023-05-10 14:34:51] Fans Change (fan0: 97 ==> 96) (fan1: 97 ==> 96) (fan2: 97 ==> 96) (fan3: 97 ==> 96) reason(t:32.440000 acc:0.060000) target_temp:71°C [2023-05-10 14:34:57] Failed to get temperatures!! [2023-05-10 14:34:57] Fans Change (fan0: 96 ==> 95) (fan1: 96 ==> 95) (fan2: 96 ==> 95) (fan3: 96 ==> 95) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:03] Failed to get temperatures!! [2023-05-10 14:35:03] Fans Change (fan0: 95 ==> 94) (fan1: 95 ==> 94) (fan2: 95 ==> 94) (fan3: 95 ==> 94) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:05] mhs 0.000000 [2023-05-10 14:35:09] Failed to get temperatures!! [2023-05-10 14:35:09] Fans Change (fan0: 94 ==> 93) (fan1: 94 ==> 93) (fan2: 94 ==> 93) (fan3: 94 ==> 93) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:15] Failed to get temperatures!! [2023-05-10 14:35:15] Fans Change (fan0: 93 ==> 92) (fan1: 93 ==> 92) (fan2: 93 ==> 92) (fan3: 93 ==> 92) reason(t:32.380000 acc:-0.060000) target_temp:71°C [2023-05-10 14:35:21] Failed to get temperatures!! [2023-05-10 14:35:21] Fans Change (fan0: 92 ==> 91) (fan1: 92 ==> 91) (fan2: 92 ==> 91) (fan3: 92 ==> 91) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:27] Failed to get temperatures!! [2023-05-10 14:35:27] Fans Change (fan0: 91 ==> 90) (fan1: 91 ==> 90) (fan2: 91 ==> 90) (fan3: 91 ==> 90) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:33] Failed to get temperatures!! [2023-05-10 14:35:33] Fans Change (fan0: 90 ==> 89) (fan1: 90 ==> 89) (fan2: 90 ==> 89) (fan3: 90 ==> 89) reason(t:32.440000 acc:0.060000) target_temp:71°C [2023-05-10 14:35:39] Failed to get temperatures!! [2023-05-10 14:35:39] Fans Change (fan0: 89 ==> 88) (fan1: 89 ==> 88) (fan2: 89 ==> 88) (fan3: 89 ==> 88) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:45] Failed to get temperatures!! [2023-05-10 14:35:45] Fans Change (fan0: 88 ==> 87) (fan1: 88 ==> 87) (fan2: 88 ==> 87) (fan3: 88 ==> 87) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:35:51] Failed to get temperatures!! [2023-05-10 14:35:51] Fans Change (fan0: 87 ==> 86) (fan1: 87 ==> 86) (fan2: 87 ==> 86) (fan3: 87 ==> 86) reason(t:32.500000 acc:0.060000) target_temp:71°C [2023-05-10 14:35:57] Failed to get temperatures!! [2023-05-10 14:35:57] Fans Change (fan0: 86 ==> 85) (fan1: 86 ==> 85) (fan2: 86 ==> 85) (fan3: 86 ==> 85) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:03] Failed to get temperatures!! [2023-05-10 14:36:03] Fans Change (fan0: 85 ==> 84) (fan1: 85 ==> 84) (fan2: 85 ==> 84) (fan3: 85 ==> 84) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:05] mhs 0.000000 [2023-05-10 14:36:09] Failed to get temperatures!! [2023-05-10 14:36:09] Fans Change (fan0: 84 ==> 83) (fan1: 84 ==> 83) (fan2: 84 ==> 83) (fan3: 84 ==> 83) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:16] Failed to get temperatures!! [2023-05-10 14:36:16] Fans Change (fan0: 83 ==> 82) (fan1: 83 ==> 82) (fan2: 83 ==> 82) (fan3: 83 ==> 82) reason(t:32.440000 acc:-0.060000) target_temp:71°C [2023-05-10 14:36:22] Failed to get temperatures!! [2023-05-10 14:36:22] Fans Change (fan0: 82 ==> 81) (fan1: 82 ==> 81) (fan2: 82 ==> 81) (fan3: 82 ==> 81) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:28] Failed to get temperatures!! [2023-05-10 14:36:28] Fans Change (fan0: 81 ==> 80) (fan1: 81 ==> 80) (fan2: 81 ==> 80) (fan3: 81 ==> 80) reason(t:32.380000 acc:-0.060000) target_temp:71°C [2023-05-10 14:36:34] Failed to get temperatures!! [2023-05-10 14:36:34] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:40] Failed to get temperatures!! [2023-05-10 14:36:40] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:46] Failed to get temperatures!! [2023-05-10 14:36:46] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:52] Failed to get temperatures!! [2023-05-10 14:36:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:36:58] Failed to get temperatures!! [2023-05-10 14:36:58] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:04] Failed to get temperatures!! [2023-05-10 14:37:04] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:06] mhs 0.000000 [2023-05-10 14:37:10] Failed to get temperatures!! [2023-05-10 14:37:10] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:16] Failed to get temperatures!! [2023-05-10 14:37:16] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:22] Failed to get temperatures!! [2023-05-10 14:37:22] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:26] file /root/mineros-version can not access [2023-05-10 14:37:26] Get File /root/mineros-version Error [2023-05-10 14:37:28] Failed to get temperatures!! [2023-05-10 14:37:28] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:34] Failed to get temperatures!! [2023-05-10 14:37:34] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:-0.070000) target_temp:71°C [2023-05-10 14:37:40] Failed to get temperatures!! [2023-05-10 14:37:40] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:46] Failed to get temperatures!! [2023-05-10 14:37:46] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:52] Get Status [2023-05-10 14:37:52] Failed to get temperatures!! [2023-05-10 14:37:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:37:52] Get MCB Barcode Error [2023-05-10 14:37:52] Get Hardware Version Error [2023-05-10 14:37:52] { [2023-05-10 14:37:52] "hardware": "xx.xx.SA", [2023-05-10 14:37:52] "model": "Goldshell-KD5", [2023-05-10 14:37:52] "mcbversion": "MCB_V3_3", [2023-05-10 14:37:52] "firmware": "2.1.5" [2023-05-10 14:37:52] } [2023-05-10 14:37:58] Failed to get temperatures!! [2023-05-10 14:37:58] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:04] Failed to get temperatures!! [2023-05-10 14:38:04] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:06] mhs 0.000000 [2023-05-10 14:38:10] Failed to get temperatures!! [2023-05-10 14:38:10] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.070000) target_temp:71°C [2023-05-10 14:38:16] Failed to get temperatures!! [2023-05-10 14:38:16] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:22] Failed to get temperatures!! [2023-05-10 14:38:22] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.060000) target_temp:71°C [2023-05-10 14:38:29] Failed to get temperatures!! [2023-05-10 14:38:29] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:35] Failed to get temperatures!! [2023-05-10 14:38:35] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:41] Failed to get temperatures!! [2023-05-10 14:38:41] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:47] Failed to get temperatures!! [2023-05-10 14:38:47] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:53] Failed to get temperatures!! [2023-05-10 14:38:53] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:38:59] Failed to get temperatures!! [2023-05-10 14:38:59] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:05] Failed to get temperatures!! [2023-05-10 14:39:05] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:07] mhs 0.000000 [2023-05-10 14:39:11] Failed to get temperatures!! [2023-05-10 14:39:11] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.500000 acc:0.060000) target_temp:71°C [2023-05-10 14:39:17] Failed to get temperatures!! [2023-05-10 14:39:17] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:23] Failed to get temperatures!! [2023-05-10 14:39:23] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:29] Failed to get temperatures!! [2023-05-10 14:39:29] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:35] Failed to get temperatures!! [2023-05-10 14:39:35] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:41] Failed to get temperatures!! [2023-05-10 14:39:41] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:47] Failed to get temperatures!! [2023-05-10 14:39:47] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:-0.060000) target_temp:71°C [2023-05-10 14:39:53] Failed to get temperatures!! [2023-05-10 14:39:53] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:39:59] Failed to get temperatures!! [2023-05-10 14:39:59] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:-0.060000) target_temp:71°C [2023-05-10 14:40:05] Failed to get temperatures!! [2023-05-10 14:40:05] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:07] mhs 0.000000 [2023-05-10 14:40:11] Failed to get temperatures!! [2023-05-10 14:40:11] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:-0.070000) target_temp:71°C [2023-05-10 14:40:17] Failed to get temperatures!! [2023-05-10 14:40:17] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:23] Failed to get temperatures!! [2023-05-10 14:40:23] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:29] Failed to get temperatures!! [2023-05-10 14:40:29] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:35] Failed to get temperatures!! [2023-05-10 14:40:35] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:41] Failed to get temperatures!! [2023-05-10 14:40:41] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:48] Failed to get temperatures!! [2023-05-10 14:40:48] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:40:54] Failed to get temperatures!! [2023-05-10 14:40:54] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:00] Failed to get temperatures!! [2023-05-10 14:41:00] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:06] Failed to get temperatures!! [2023-05-10 14:41:06] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.250000 acc:-0.060000) target_temp:71°C [2023-05-10 14:41:08] mhs 0.000000 [2023-05-10 14:41:12] Failed to get temperatures!! [2023-05-10 14:41:12] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:18] Failed to get temperatures!! [2023-05-10 14:41:18] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.190000 acc:-0.060000) target_temp:71°C [2023-05-10 14:41:24] Failed to get temperatures!! [2023-05-10 14:41:24] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.190000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:30] Failed to get temperatures!! [2023-05-10 14:41:30] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:-0.060000) target_temp:71°C [2023-05-10 14:41:36] Failed to get temperatures!! [2023-05-10 14:41:36] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:42] Failed to get temperatures!! [2023-05-10 14:41:42] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:48] Failed to get temperatures!! [2023-05-10 14:41:48] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:0.000000) target_temp:71°C [2023-05-10 14:41:54] Failed to get temperatures!! [2023-05-10 14:41:54] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:00] Failed to get temperatures!! [2023-05-10 14:42:00] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:06] Failed to get temperatures!! [2023-05-10 14:42:06] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.130000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:08] mhs 0.000000 [2023-05-10 14:42:12] Failed to get temperatures!! [2023-05-10 14:42:12] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.060000 acc:-0.070000) target_temp:71°C [2023-05-10 14:42:18] Failed to get temperatures!! [2023-05-10 14:42:18] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.060000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:24] Failed to get temperatures!! [2023-05-10 14:42:24] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.060000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:30] Failed to get temperatures!! [2023-05-10 14:42:30] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.000000 acc:-0.060000) target_temp:71°C [2023-05-10 14:42:36] Failed to get temperatures!! [2023-05-10 14:42:36] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:32.000000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:42] Failed to get temperatures!! [2023-05-10 14:42:42] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.940000 acc:-0.060000) target_temp:71°C [2023-05-10 14:42:48] Failed to get temperatures!! [2023-05-10 14:42:48] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.940000 acc:0.000000) target_temp:71°C [2023-05-10 14:42:54] Failed to get temperatures!! [2023-05-10 14:42:54] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.880000 acc:-0.060000) target_temp:71°C [2023-05-10 14:43:00] Failed to get temperatures!! [2023-05-10 14:43:00] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.880000 acc:0.000000) target_temp:71°C [2023-05-10 14:43:07] Failed to get temperatures!! [2023-05-10 14:43:07] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.810000 acc:-0.070000) target_temp:71°C [2023-05-10 14:43:09] mhs 0.000000 [2023-05-10 14:43:13] Failed to get temperatures!! [2023-05-10 14:43:13] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.750000 acc:-0.060000) target_temp:71°C [2023-05-10 14:43:19] Failed to get temperatures!! [2023-05-10 14:43:19] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:-0.060000) target_temp:71°C [2023-05-10 14:43:25] Failed to get temperatures!! [2023-05-10 14:43:25] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:0.000000) target_temp:71°C [2023-05-10 14:43:31] Failed to get temperatures!! [2023-05-10 14:43:31] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:-0.060000) target_temp:71°C [2023-05-10 14:43:37] Failed to get temperatures!! [2023-05-10 14:43:37] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:43:43] Failed to get temperatures!! [2023-05-10 14:43:43] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:43:49] Failed to get temperatures!! [2023-05-10 14:43:49] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:43:55] Failed to get temperatures!! [2023-05-10 14:43:55] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:44:01] Failed to get temperatures!! [2023-05-10 14:44:01] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:-0.070000) target_temp:71°C [2023-05-10 14:44:07] Failed to get temperatures!! [2023-05-10 14:44:07] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:44:09] mhs 0.000000 [2023-05-10 14:44:13] Failed to get temperatures!! [2023-05-10 14:44:13] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:-0.060000) target_temp:71°C [2023-05-10 14:44:19] Failed to get temperatures!! [2023-05-10 14:44:19] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:-0.060000) target_temp:71°C [2023-05-10 14:44:25] Failed to get temperatures!! [2023-05-10 14:44:25] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:-0.060000) target_temp:71°C [2023-05-10 14:44:31] Failed to get temperatures!! [2023-05-10 14:44:31] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:44:37] Failed to get temperatures!! [2023-05-10 14:44:37] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:-0.070000) target_temp:71°C [2023-05-10 14:44:43] Failed to get temperatures!! [2023-05-10 14:44:43] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:-0.060000) target_temp:71°C [2023-05-10 14:44:49] Failed to get temperatures!! [2023-05-10 14:44:49] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:44:55] Failed to get temperatures!! [2023-05-10 14:44:55] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:45:01] Failed to get temperatures!! [2023-05-10 14:45:01] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.060000) target_temp:71°C [2023-05-10 14:45:07] Failed to get temperatures!! [2023-05-10 14:45:07] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:45:09] mhs 0.000000 [2023-05-10 14:45:13] Failed to get temperatures!! [2023-05-10 14:45:13] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:45:19] Failed to get temperatures!! [2023-05-10 14:45:19] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:45:26] Failed to get temperatures!! [2023-05-10 14:45:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.070000) target_temp:71°C [2023-05-10 14:45:32] Failed to get temperatures!! [2023-05-10 14:45:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:-0.070000) target_temp:71°C [2023-05-10 14:45:38] Failed to get temperatures!! [2023-05-10 14:45:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:45:44] Failed to get temperatures!! [2023-05-10 14:45:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:-0.060000) target_temp:71°C [2023-05-10 14:45:50] Failed to get temperatures!! [2023-05-10 14:45:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:45:56] Failed to get temperatures!! [2023-05-10 14:45:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:46:02] Failed to get temperatures!! [2023-05-10 14:46:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:46:08] Failed to get temperatures!! [2023-05-10 14:46:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.250000 acc:0.000000) target_temp:71°C [2023-05-10 14:46:09] mhs 0.000000 [2023-05-10 14:46:14] Failed to get temperatures!! [2023-05-10 14:46:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.060000) target_temp:71°C [2023-05-10 14:46:20] Failed to get temperatures!! [2023-05-10 14:46:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:46:26] Failed to get temperatures!! [2023-05-10 14:46:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.070000) target_temp:71°C [2023-05-10 14:46:32] Failed to get temperatures!! [2023-05-10 14:46:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.060000) target_temp:71°C [2023-05-10 14:46:38] Failed to get temperatures!! [2023-05-10 14:46:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:46:44] Failed to get temperatures!! [2023-05-10 14:46:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:46:50] Failed to get temperatures!! [2023-05-10 14:46:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.060000) target_temp:71°C [2023-05-10 14:46:56] Failed to get temperatures!! [2023-05-10 14:46:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:-0.060000) target_temp:71°C [2023-05-10 14:47:02] Failed to get temperatures!! [2023-05-10 14:47:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.060000) target_temp:71°C [2023-05-10 14:47:08] Failed to get temperatures!! [2023-05-10 14:47:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:47:09] mhs 0.000000 [2023-05-10 14:47:14] Failed to get temperatures!! [2023-05-10 14:47:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:47:20] Failed to get temperatures!! [2023-05-10 14:47:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.060000) target_temp:71°C [2023-05-10 14:47:26] Failed to get temperatures!! [2023-05-10 14:47:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:47:32] Failed to get temperatures!! [2023-05-10 14:47:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:47:38] Failed to get temperatures!! [2023-05-10 14:47:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.070000) target_temp:71°C [2023-05-10 14:47:44] Failed to get temperatures!! [2023-05-10 14:47:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:0.060000) target_temp:71°C [2023-05-10 14:47:50] Failed to get temperatures!! [2023-05-10 14:47:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:0.000000) target_temp:71°C [2023-05-10 14:47:56] Failed to get temperatures!! [2023-05-10 14:47:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:02] Failed to get temperatures!! [2023-05-10 14:48:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:08] Failed to get temperatures!! [2023-05-10 14:48:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:-0.060000) target_temp:71°C [2023-05-10 14:48:10] mhs 0.000000 [2023-05-10 14:48:14] Failed to get temperatures!! [2023-05-10 14:48:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:20] Failed to get temperatures!! [2023-05-10 14:48:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:26] Failed to get temperatures!! [2023-05-10 14:48:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:32] Failed to get temperatures!! [2023-05-10 14:48:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:38] Failed to get temperatures!! [2023-05-10 14:48:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:44] Failed to get temperatures!! [2023-05-10 14:48:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:50] Failed to get temperatures!! [2023-05-10 14:48:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:48:56] Failed to get temperatures!! [2023-05-10 14:48:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.690000 acc:0.060000) target_temp:71°C [2023-05-10 14:49:02] Failed to get temperatures!! [2023-05-10 14:49:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:-0.060000) target_temp:71°C [2023-05-10 14:49:08] Failed to get temperatures!! [2023-05-10 14:49:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.630000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:10] mhs 0.000000 [2023-05-10 14:49:14] Failed to get temperatures!! [2023-05-10 14:49:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:-0.070000) target_temp:71°C [2023-05-10 14:49:20] Failed to get temperatures!! [2023-05-10 14:49:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:27] Failed to get temperatures!! [2023-05-10 14:49:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:33] Failed to get temperatures!! [2023-05-10 14:49:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:39] Failed to get temperatures!! [2023-05-10 14:49:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:45] Failed to get temperatures!! [2023-05-10 14:49:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:51] Failed to get temperatures!! [2023-05-10 14:49:51] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:49:57] Failed to get temperatures!! [2023-05-10 14:49:57] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.560000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:03] Failed to get temperatures!! [2023-05-10 14:50:03] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:-0.060000) target_temp:71°C [2023-05-10 14:50:09] Failed to get temperatures!! [2023-05-10 14:50:09] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:10] mhs 0.000000 [2023-05-10 14:50:15] Failed to get temperatures!! [2023-05-10 14:50:15] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:21] Failed to get temperatures!! [2023-05-10 14:50:21] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:-0.060000) target_temp:71°C [2023-05-10 14:50:27] Failed to get temperatures!! [2023-05-10 14:50:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:33] Failed to get temperatures!! [2023-05-10 14:50:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:39] Failed to get temperatures!! [2023-05-10 14:50:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:45] Failed to get temperatures!! [2023-05-10 14:50:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:51] Failed to get temperatures!! [2023-05-10 14:50:51] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:50:57] Failed to get temperatures!! [2023-05-10 14:50:57] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.060000) target_temp:71°C [2023-05-10 14:51:03] Failed to get temperatures!! [2023-05-10 14:51:03] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:09] Failed to get temperatures!! [2023-05-10 14:51:09] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:10] mhs 0.000000 [2023-05-10 14:51:15] Failed to get temperatures!! [2023-05-10 14:51:15] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.500000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:21] Failed to get temperatures!! [2023-05-10 14:51:21] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:-0.060000) target_temp:71°C [2023-05-10 14:51:27] Failed to get temperatures!! [2023-05-10 14:51:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:33] Failed to get temperatures!! [2023-05-10 14:51:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:-0.060000) target_temp:71°C [2023-05-10 14:51:39] Failed to get temperatures!! [2023-05-10 14:51:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:45] Failed to get temperatures!! [2023-05-10 14:51:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:51] Failed to get temperatures!! [2023-05-10 14:51:51] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:51:57] Failed to get temperatures!! [2023-05-10 14:51:57] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:03] Failed to get temperatures!! [2023-05-10 14:52:03] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:09] Failed to get temperatures!! [2023-05-10 14:52:09] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:10] mhs 0.000000 [2023-05-10 14:52:15] Failed to get temperatures!! [2023-05-10 14:52:15] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:21] Failed to get temperatures!! [2023-05-10 14:52:21] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:27] Failed to get temperatures!! [2023-05-10 14:52:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:33] Failed to get temperatures!! [2023-05-10 14:52:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:39] Failed to get temperatures!! [2023-05-10 14:52:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:-0.070000) target_temp:71°C [2023-05-10 14:52:45] Failed to get temperatures!! [2023-05-10 14:52:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:52] Failed to get temperatures!! [2023-05-10 14:52:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:52:58] Failed to get temperatures!! [2023-05-10 14:52:58] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:53:04] Failed to get temperatures!! [2023-05-10 14:53:04] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:53:10] Failed to get temperatures!! [2023-05-10 14:53:10] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:53:11] mhs 0.000000 [2023-05-10 14:53:16] Failed to get temperatures!! [2023-05-10 14:53:16] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.310000 acc:0.000000) target_temp:71°C [2023-05-10 14:53:22] Failed to get temperatures!! [2023-05-10 14:53:22] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.070000) target_temp:71°C [2023-05-10 14:53:28] Failed to get temperatures!! [2023-05-10 14:53:28] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:53:34] Failed to get temperatures!! [2023-05-10 14:53:34] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C [2023-05-10 14:53:40] Failed to get temperatures!! [2023-05-10 14:53:40] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.440000 acc:0.060000) target_temp:71°C [2023-05-10 14:53:46] Failed to get temperatures!! [2023-05-10 14:53:46] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:-0.060000) target_temp:71°C [2023-05-10 14:53:52] Failed to get temperatures!! [2023-05-10 14:53:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80) reason(t:31.380000 acc:0.000000) target_temp:71°C

Alternate cryptocurrencies / Mining (Altcoins) / Goldshell KD5 - doesnt start hashing

on: May 10, 2023, 06:54:52 AM

Hi guys! I updated the firmware to the newest one. After that it didn`t start to hash anymore. I flashed it back to the older firmware but no success. What can be wrong? Thanks in adavnce!

Alternate cryptocurrencies / Mining (Altcoins) / Re: ibelink firmware - how to tune BM-K1+?

on: May 08, 2023, 07:30:00 PM

Setting warning temp to 70 and safe tempature 67 What would you recommend?

Pages: [1] 2 3 4 »