Show Posts
|
Pages: [1] 2 3 »
|
One here - what's wrong with their website right now? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Going to have to promote this question. I'll ask him about it before we start recording and if it's a serious problem (i.e. they got raided by the FBI or something haha), we'll definitely cover it on the show. Their domain whois information changed in the past day or two, might be changing providers (and had an issue), but that's just a guess. Having just placed my first order with them, I'm obviously a little nervous now though as a result.
|
|
|
Is Amagimetals down for anyone else? I placed my first order a few days ago, and now the site seems to have been down for around the last day or so.
Fyi - Just flushed my DNS cache and they seem to be back online.
|
|
|
I have some Bitmain coupons, feel free to request them. I'm not asking for anything for them, though tips would be appreciated.
PM me with your ID, coupon type and quantity and I'll send them over. First come, first served.
AntMiner C1 Coupon 50 USD Qty 2 None Left Expires 2014-11-30 11:10:00
AntMiner S3+ Coupon 50 USD Qty 2 None Left Expires 2014-11-30 22:16:00
AntMiner S4 Coupon 400 USD Qty 6 3 1 None Left Expires 2014-11-30 22:18:00
|
|
|
Fyi if anyone is interested, I have six $400 Bitmain S4 coupons available (good through the end of November) that I would be willing to donate (tips appreciated). If interested PM me your ID and the quantity of coupons you'd like (first come, first serve).
|
|
|
I'd like to know too. I was ok with slipping to B6, though if it's slipped again I will likely just cancel.
|
|
|
Hi Benny, Any word on incoming S3's from batch 5? Just wondering as it looks like Bitmain is starting to ship them.
Thanks!
Hi Benny, any word?
|
|
|
Hi Benny, Any word on incoming S3's from batch 5? Just wondering as it looks like Bitmain is starting to ship them.
Thanks!
|
|
|
Early batch 4 order just received via DHL, both are up and running on the latest firmware and so far appear good. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
Woke up to B4 shipping details, I had ordered within a few minutes of it opening.
|
|
|
Alright, I need one more and this price is too good for a single unit; I'm in.
|
|
|
Hello miners,
I recently bought Antminer S3 and after all required setting configuaration the miner remains in standby mode (Red light off and green light blinking per second). Here is all required information:
--my ipconfig is: --
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : westell.com Link-local IPv6 Address . . . . . : fe80::fd99:662:caa3:612%12 IPv4 Address. . . . . . . . . . . : 192.168.0.193 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::2557:f20c:960f:e444%11 IPv4 Address. . . . . . . . . . . : 192.168.1.250 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 -----------------------
My router ip is 192.168.0.1
--ANTMINER S3 Miner's WAN Configuaration--
Protocol - Static IPv4 address - 192.168.1.99 IPv4 netmask - 255.255.255.0 IPv4 gateway - 192.168.0.1 IPv4 broadcast - 192.168.1.255 Use custom DNS servers - 192.168.0.1 ----------------------------------------------------
Also when I insert the ethernet cord from Antminer S3 into computer's ethernet port, will it start mining if the configuration is correct? Or I have to remove the ethernet cord from computer and insert it into router?
Please help! Thanks in advance.
Protocol - Static IPv4 address - 192.168.1.99 IPv4 netmask - 255.255.255.0 IPv4 gateway - 192.168.0.1 This is not correct, the gateway cannot be on a different subnet.
|
|
|
Yes. I am in the US. It looks like they have each room wired to a 20amp breaker. (3 "receptacles" per room ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ) I have 2x 750w power supplies powering my equipment that's currently running. I have an identical setup that I'll be adding tomorrow. There is room in the breaker box for expansion... (spaces between current breakers) Would 240 mean getting separate service run? Or, can they run 240 from an existing panel? (I know nothing about electrical - please excuse my ignorance) It's an office building - so they have a couple "double breakers" labeled for the AC unit and furnace. Thanks guys for the input so far... Be careful with 20 amp breakers, since often times the previous owner will simply change out the breaker with a larger one (simply because the old one was tripping). Often times you'll find that the 20 amp breaker is paired with 14 gauge or smaller wire, 15 amp recepticles, or even correct wiring run through an over-populated conduit, all of which can create a fire hazard. No problems with trusting a 20 amp breaker if you're certain that the entire circuit is up to the task.
|
|
|
f5 . . . f5 . . . f5 . . .
Finger so tired, carpal tunnel setting in...
|
|
|
+2; 6b731583c1782f3a0974d246dac8cfc300d36d494c64bd605f1322a6b26ec4d6 ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
From Microcenter: AC Adapter Output Voltage 5V AC Adapter Output Amperage 2A
5 USB BEs = 2.5A minimum, so you likely overran the hubs PS for a bit. I vote for power problems too.
|
|
|
If you purchased directly from anker you can use all 10 ports and burn the thing out and request a RMA for it, I've used the AiTech and Orico with all 10 ports and no problems as of yet. The new anker I've only used 9 of the ports on so. [/quote] New hub arrived (the 9+1 version), a BE in the +1 slot will start up to a constant green light, but it never shows up in device manager. I've tried a couple combinations to make sure it wasn't a bad BE, so it looks like that +1 port can't actually run a BE (aka, power only). Sucks, now I have 1 BE left over with no more USB ports... Dare I order another hub with more BEs...
|
|
|
I did too order the 'new' 10-port Anker ( http://www.amazon.com/Release-Anker%C2%AE-Uspeed-Charging-Adapter/dp/B005NGQWL2), which is really 9+1. It ships with a 5A PS though which is good, and there were a couple postings stating that you can use all 10 ports. I have one of the older 10-port Ankers today, though because the older PS was only 4A it get's problematic to use more than 8 Erupters on it. We shall see, it should arrive sometime today.
|
|
|
So this isent a redemption just any previous customer gets them for. 15? And they are in stock ready to ship now?
yep, I can ship them as soon as payment is received. Blast Canary's fast shipping... My USB Erupters got here before my new USB hub (Amazon Prime even)!!!
|
|
|
|