Show Posts
|
Pages: [1] 2 3 »
|
i've tried it in firefox and opera and i just get the spinning wheels for both on both browsers
Hi, Sani, most of browsers are working fine in general. Which country are you? If you can not see your OTP QR code on Firefox, Opera, we suggest you use Chrome. I've managed to get a code and when i enter it into the following screen where it also asks for a 6 digit one time password (which i emter a ramdom 6 digits) and when i press the enable OTP button nothing happens? thanks Sani How the OTP and secret key worked? Did you try with Chrome? I'm curious. When you enable OTP successfully, you will see the button name has changed from 'OTP enable' to 'OTP disable'. Make sure that you input your OTP(6 digits) and secret key correctly. Not quite sure what i did i was playing around on my phone and changed over to my saniscrypt@gmail.com address in the play store and i got the qr code and the secret key showed up. I've since got a new key and am now getting "enabled otp failed - -wrong otp or otp secret key" when i type the new secret key in
|
|
|
i've tried it in firefox and opera and i just get the spinning wheels for both on both browsers
Hi, Sani, most of browsers are working fine in general. Which country are you? If you can not see your OTP QR code on Firefox, Opera, we suggest you use Chrome. I've managed to get a code and when i enter it into the following screen where it also asks for a 6 digit one time password (which i emter a ramdom 6 digits) and when i press the enable OTP button nothing happens? thanks Sani
|
|
|
i've tried it in firefox and opera and i just get the spinning wheels for both on both browsers
|
|
|
thanks for the response it still doesn't load, ive tried refreshing the browser, i'm using opera as my browser
|
|
|
the QR code and the OTP secret key doesn't load when trying to set up otp verification. i've tried sending a support ticket but it doesnt tell me if it went through or not. how can i fix this thanks Sani
|
|
|
the QR code and the OTP secret key doesn't load when trying to set up otp verification. i've tried sending a support ticket but it doesnt tell me if it went through or not. how can i fix this thanks Sani
|
|
|
Merry giftmas everyone
after a bit of a break i'm back into my cryptocurrencies i have to start again with my fail coin as i lost my wallet but have a decentish computer now so can maybe mine/contribute more when as/when you relaunch sani
Edit: i got the beta wallet and cant see the bit where its syncing ETC
|
|
|
with JDownloader v.2 all the link works
thats the version i'm using that told me the link was offline i'll try again now though
|
|
|
according to jdownloader the first link is offline?
|
|
|
Just installed kodi on the Odroid C2, now my staking box is also my home entertainment system ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Plays movies perfectly over network from my archives on windows box ... Good bye windows media player classic ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) Going to order the odroid infrared remote next ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ordered $4.95 + shipping i have kodi installed on a 32 gig sd card for my rpi2 its a great lil os
|
|
|
This is awesome, I just found this the other day and finally got it running on my Pi tonight. However, I would like to add a couple wallets, Litecoin for one. I see it was in earlier versions.
Is there a guide on doing so? I've been looking ever since I got this running, not much luck.
you can use the tutorial for upgrading the bitcoin wallet to 0.12 just substitute the bitcoin bits with litecoin
|
|
|
am trying to get the wallet installed on raspbian on a raspberry pi 2 but am getting an error when i type make -f makefile.unix the error i get is:
g++: error:unrecognised command line option '-msse2' makefile.unix:159: recipe for target 'obj/alert.o' failed make: *** [obj/alert.o] error 1
is there a way to get past this error and get the wallet running on my pi?
thanks sani
hi we updated the source wallet. can you please try the updated one now https://github.com/metalmusiccoin/MTLMCV3hey thanks for getting back i've deleted the code from my pi and recloned it with the new files the process i followed is: -git clone -b master https://github.com/metalmusiccoin/MTLMCV3-cd MTLMCV3/src -make -f makefile.unix after i press enter/return on the last line i get the following output: g++ -c -O2 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/home/pi/MTLMCV3/src -I/home/pi/MTLMCV3/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp g++: error: unrecognized command line option ‘-msse2’ makefile.unix:159: recipe for target 'obj/alert.o' failed make: *** [obj/alert.o] Error 1 i have read somewhere that the raspberry pi isnt compatible with msse2 (no idea what msse2 is) and i dont know what part(s) of the code to change to be able to move past the error
|
|
|
am trying to get the wallet installed on raspbian on a raspberry pi 2 but am getting an error when i type make -f makefile.unix the error i get is:
g++: error:unrecognised command line option '-msse2' makefile.unix:159: recipe for target 'obj/alert.o' failed make: *** [obj/alert.o] error 1
is there a way to get past this error and get the wallet running on my pi?
thanks sani
|
|
|
Great work!! have it installed on a 32gig SD card and just waiting for bitcoin core to activate "best chain"
|
|
|
...
Hey, FAIL team has another chat this weekend and I'll ask the lead dev about your problem. Cheers, Spartak cool thank you Hello, According to our Lead dev, you are probably missing QT dependencies. His exact words were: "I think he have done it completely wrong. I did build fail wallet for linux without any problem. He is most likely still missing qt dependencies." I hope that helps. Cheers, Spartak cool thanks, what qt dependencies is he using soi can install them? i got it to install i installed: sudo apt-get install libqt4-dev qt4-dev-tools libprotobuf-dev protobuf-compiler libqrencode-dev and it installed. thank you for helping sani
|
|
|
...
Hey, FAIL team has another chat this weekend and I'll ask the lead dev about your problem. Cheers, Spartak cool thank you Hello, According to our Lead dev, you are probably missing QT dependencies. His exact words were: "I think he have done it completely wrong. I did build fail wallet for linux without any problem. He is most likely still missing qt dependencies." I hope that helps. Cheers, Spartak cool thanks, what qt dependencies is he using soi can install them?
|
|
|
...
Hey, FAIL team has another chat this weekend and I'll ask the lead dev about your problem. Cheers, Spartak cool thank you
|
|
|
i've managed to get the failcoin wallet to start installing in linux from the source code on github but had to add the obj folder in src. would it be possible to add it to the code
edit: it failed due to msse2 isnt compatible with the pi, after changing the code with: DEFINES += HAVE_BUILD_INFO } -# If we have an arm device, we can't use sse2, so define as thumb +# If we have an ARM device, we can't use SSE2 instructions, so don't try to use them # Because of scrypt_mine.cpp, we also have to add a compile # flag that states we *really* don't have SSE -# Otherwise, assume sse2 exists -!equals($$QMAKE_HOST.arch, armv7l) { - message(FOUND host = $$QMAKE_HOST.arch) - QMAKE_CXXFLAGS += -DNOSSE +QMAKE_XCPUARCH = $$QMAKE_HOST.arch +equals(QMAKE_XCPUARCH, armv7l) { + message(Building without SSE2 support) + QMAKE_CXXFLAGS += -DNOSSE + QMAKE_CFLAGS += -DNOSSE +} +else:equals(QMAKE_XCPUARCH, armv6l) { + message(Building without SSE2 support) + QMAKE_CXXFLAGS += -DNOSSE QMAKE_CFLAGS += -DNOSSE } else { + message(Building with SSE2 support) QMAKE_CXXFLAGS += -msse2 QMAKE_CFLAGS += -msse2 }
but now i get: src/qt/bitcoingui.h:4:23: fatal error: QMainWindow: no such file or directory #include <QMainWindow> ^ compilation terminated. makefile:890: recipe for target 'build/bitcoin.o' make: *** [buildbitcoin.o] error 1
how can i get past this error thanks Sani
|
|
|
|