 Show Posts
|
|
Pages: [1] 2 »
|
I expect it to rise too. Everone is just panicking as retarded.
+1 |
|
|
|
I want good lunch, with really good coin. So take your time  |
|
|
|
|
Can some one help me with gt640 2gb?
I try with
cudaminer --algo=keccak -d gt640 -l K2x32 --benchmark
K2x32 is from autotune without --algo=keccak
When i put --algo=keccak and the miner says "try cudaminer --help"
|
|
|
|
|
What should i put in bat file for gt640 2gb??
I try with this but it wont work. Where is the problem?
cudaminer --algo=keccak -d gt640 -l K2x32 --benchmark
Thank you!
|
|
|
|
|
Cool!! Big fan of Futurama!!!!
|
|
|
|
Personally it showed no improvement on my HD7850 card. Probably needs a lot of tweaking to find the better "Sweet spot" above 414 hash. But I like keeping current on my software. Thank you very much for providing it.
Hi. Just wanted to ask if you would care to share your exact settings and card model for the 7850 card that you claim do 414 khash. I just have two 7850, but they are the cheap xfx ones with 1gb memory and only one fan, and with high overclocks I reach about 385 khash. The temperature of my cards is then between 74-80C so I do not believe I can clock them any higher. But please share your settings if you like, cause I plan to pick up more cheap 7850 cards and sell off my 5-series cards while they still are alive and worth something. xfx cards are very bad at scrypt mining. You can`t force them to make more then 390kh/s without burning them. |
|
|
|
yeah was fine for like 15 min ...not a single reject ... then i start get alot of them
then start getting rejected ...... and its not the network/pool .. since i always mine at the same pool with the same old 64 miner....mostly never get a reject/stale
Same story. The solution is to restart the miner. It work for me. Now i have 100% accepted. |
|
|
|
|
minerd -a qubit -o stratum+tcp://q2c.smalltimeminer.com:3349 -u user -p pass
If you need to adjust how many treads to use, use -t <number of cores>
|
|
|
|
Yes the speed is x2, but i have too much rejected 1/9 and stop it. The CPU is i7 2635QM /2GHz/ 270 KH/s On Phenom x4 b35 / 2,9GHz it did ~300 kh/s and 100% accepted All on windows 7 64bit You can put some donation address for this kind dude  i think problem in reject shares is in server side... i have the same problem... miner run fine... but sometime start reject all shares... need restart miner after that all work fine... or maybe promlem is in miner )) p.s. its alpha version... can crash can dont work on your pc)) i dont test miner on linux os and and do not give a guarantee that it compile in linux... It`s working fine after restart! Grat work! |
|
|
|
|
Ok i`ll give it a second rty
|
|
|
|
Yes the speed is x2, but i have too much rejected 1/9 and stop it. The CPU is i7 2635QM /2GHz/ 270 KH/s On Phenom x4 b35 / 2,9GHz it did ~300 kh/s and 100% accepted All on windows 7 64bit You can put some donation address for this kind dude |
|
|
|
Nowadays, computers are too simple and do not need to know how to read;]
+1  |
|
|
|
We've changed the way you are receiving your SMC. From this point on, if you haven't received an email, you will receive one tomorrow with a unique link to input your wallet address. That way, people who are active will actually claim their coins, not be given a voucher essentially. If there are people who never claim their SMC, it does not go to waste.
Please keep in mind that this is the very first time this distribution strategy has been tried and it has only been a day since launch. We are working diligently to answer PMs, juggle the IRC, and try to debug people's errors whilst creating a reliable way of claiming coins.
You should put this info in OP page because people don`t read and just CRYING!!!! On every one page you can see "why i didn`t recieve mail?" "when you`ll send them?" and other sh*ts. |
|
|
|
Some times the rejections may be caused from bad pool. I can advise you to try other pool for test.
Well I'm using same p2pool for Smartcoin and USDe, so conditions are the same. Someone told me that smart has 5s LP and USDe 10s, but I don't know what LP is and how should I adjust my CGminer settings. LP= Long pool ?? You can`t adjust that |
|
|
|
Guys,
could you help me to decrease my rejct rate. I've got same settings for Smart and USDe. My ping to p2pool is around 50ms (taken.pl) and smart is: 14-15%, usde 7% rejects.
Here's my Cgminer config for 3x7950 (1,9 Mhash)(win 7, 4GB RAM, Sempron 145):
-Q 0 --expiry 10 --scan-time 5 -I 18 --thread-concurrency 22400,22400,22400 --gpu-threads 1 --lookup-gap 2 --worksize 256 --gpu-engine 1100,1100,1100 --gpu-memclock 1500,1500,1500 --gpu-powertune 20,20,20 --gpu-fan 68,65,65 --temp-cutoff 85,85,85
Just don't know, what could be improved.
Some times the rejections may be caused from bad pool. I can advise you to try other pool for test. |
|
|
|
|
follow on twitter
@Vladi_Trifonov
DFv6HoP5NmRWeY9vuhTQyUQxAvZjZsrQe3
Thanks!
|
|
|
|
|
Great ANN page! So much work is done, good job!
9Umsa4YRcEtZPk2pdh7LycaVF1gzYCiVNC
Thanks in advance!
|
|
|
|
My coins are on the market! The site seems to be good for now. Thanks! |
|
|
|
|
