Thats absolutely wrong what you tell there! I followed the instructions from Bitmain They said it's better to reset when you get one new so i#ve done it and the reset doesn't work, a few times i made it because in the internet you can find some threads about "not working reset" and when you read it you know that sometimes the reset at a s3 doesn't work, ok no problem, we can make it a lot of times because reseting a miner is not a damage to him. You only set him to basic configuration but it worked already not so i came to here and ask what it will be, you guy tell me something about "didn't hear on anything about the internet" and " reset"  so all videos and threads about reseting a S3 were the same: let miner run for 3 minutes --> plug a thing in the hole on the right side of the Lan (you said Toothpick), hold it for about 10 seconds and after that wait 3 minutes ----> then stick in the hole with toothpick again and wait after that again 3 minutes than power it off and power it on ... thats nothing difficult even for my 4 year old son not and i've done it right the descriptions said, don't work! So whats in your opinion wrong with it?

I have no other miners or ip using things in my networkt the s3 are the only one there and i only pluged one to power supply not the two miners at the same time so what will you tell me about network when there is no other machine in the network configured outa the miner? And Darwin who i telled the seller is the fault? I only told that he doesn't give me the logindates and the other one doesn't reset the miner but what you said is already dumb like you are and from a person like you which can't help and can only talk shit i don't wanna any help so bye Darwin! 

No dumbass i reply to tell you the fuckin 1.00th time that RESET WILL NOT WORK !!! your fucking toothpick won't work a few times not only one time NO FEW TIMES I have done the reset shit few times and it still does nothing did you understand now??? Thanks to the otherone, i think when debugging will not work, the controlboard change is the easiest way but i sell them and i have two problems lost 1: the other guy and the S3+'s

Sry but you realy did understand nothing! I have picked with something like a toothpick in the hole ... Few times and also have waited 3 minutes ... few times and also stick in the hole again .... a few times and then waited again the 3 minutes ... few times ... powered it off and on again ... few times and nothing done with this ... few times. I have looked many tutorials about it and read also instructions may i will not destroy him! So i've done this many times, so many i can't count anymore! But it get's to dumb with these to me so i set it in to ebay and buy better the S1's. And about the explaining: How can i describe you more that the LIBRARY is not found? How often must i told that when i will save something the page does not exist? I think the problem is a bug (Someone tolds me a while ago that's typical for the S3 Units) so i have to buy a debug adapter to USB and putty them to "firstboot" but in my opinion is that to much work and not a guarantee for me that this will never happened again. They get selled and problem is cleared! Thanks

Jap i've said it before ... I have done the Reset now again 3 times behind and all i can do is nothing, the same ip (not static and in my routers range) and the same with password and username error/invalid. So now i have the only option to putty them two? When it is so i sell this crap things and buy me more S1 units! I'm so pissed about 3 weeks ;( First a CC A1 destroyed my network and now i know that i am the only lucky guy which bought a s3+ which has the reset bug i think, from the other one we won't speak right now ... That's Luck I go and play better Lottery maybe i had the six right numbers to win i think
Thanks for all I threw them to ebay i think.

I think about to install the firmware complete new on the first miner so it have the basic settings and the library works again so i can configure the rest step by step but i can, now i can't configure anything


The second... I will try to reset it again ... So before i do this the 453th time, is it the rigth way? Push the reset butten for about 10-15 seconds ---> wait about 3 minutes after that with power on ----> push the button again ---> wait again about 3 minutes ---> switch power off and again on and it will work? So than i can tell you before that it won`t work but i can try again and again so the miner isn't working and i have no better to do with him in the moment Also when here is somewhere with a little time we can teamview about it, maybe i'm only to dumb for it

So i've done nothing to the first miner, i was happy that it runs for about two weeks without problems and then my pool found 2 blocks in 1-3 minutes and from then it runs but nothing gets to the pool ... i can enter the "Miner status" and the "Miner Configuration" but when i will set a new pool and will "save&aply" it doesn't work at all "No Library" Can i nothing do to him to let him back to work? I thought like a new "image" upload on it or something like that ....

Second One was also reseted and nothing works, when i get to the interface (not over the standard ip, whats wondering me) and gave "root" in the password field it says invalid password or username ... how can i fix this probs? Gives therefor a solution?

Thanks

Hey Guys hope you can Help me 
I have two Antminers S3+ bought used over ebay. To the First one: I've bought it with a 1.000Watts Server PSU, so i know as a absolutely Noob that the PSU is not the Problem. It was complete configured to my Pool when it arived, so i pluged it in and it starts to mine with no Problems. But than someday in my Pool was a "Doublehash" ( i named it so when the pool found 2 Blocks on the same time) and the miner starts to beep and after that he shuts down. I have read that i must disconnect the power suply and connect it again so it would run, also i've done this and i thought it were everything fine again but nothing. In my Pool there comes no power from the S3+ and when i get in the configuration menu (interface) i can't change things, when i click on "Save & aply" comes a text "No library" or "LUA Error" or something in this direction. In some menu points in the Interface i cant get in, he tolds me directly that there is no library or something not installed or LUA Error. So i thought "reset it" i tried about feeled 100 resets and no one worked, when i get back in the interface the same as before It's verry frustrating to see others wo run a reset with no problems i dumbass made a antminer to a deco objekt :///

To the second One: I've bought it also over Ebay used from a other seller like the first Antminer S3+. I pluged it in, gave the ip in the browser and boom Password :O so i tried "root" and nothing goes -.- I've contacted the seller to get the password from him, he tolds me in a mail that it must be "Robert12" or "root" In this moment i knew he doesnt have a plan about the password and im fucked again :/ So i have a PSU which works and a Miner without interface login due to lost password of the pre user. Can i hack it or crack it somehow? For any ideas and Help i'm verry Thankfull

Ähm, ich bin ganz Ehrlich. Ich habe vor ca. 4 Wochen mit nem Bitfury angefangen und mich dann über nen U3 zu 4x S1, 1xS3+ und dem CC A1 gearbeitet. Ich wusste gar nicht, bis Gestern, das es ein CC A1 ist, ich suchte in einem anderen thread von Lktec Geräten. Ich schoss mir über das Wochenende den Router ab, welcher mich selbst nur noch als Gast reinlässt, da er jegliche Kennwörter von mir verweigert sei es die Werksseitigen oder meine Konfigurierten. Ich werde wohl nicht drumherum kommen mir einen neuen bei Vodafone anzufordern :/ Jedoch will ich die Miner möglichst laufen lassen denn Zeit ist ja in dem Fall Geld. Der CC A1 wurde von mir über Ebay von einer Verkäuferin verkauft, mit dem Hinweis es müsse ein Kühlkörper neu geklebt werden, 2 Lüfter eingesetzt werden und eben ein Netzteil. Sollte keine Schwierigkeit darstellen dachte ich Er kam, ich verbaute die Lüfter und ein 950 Watt Netzteil (Ja ist viel zu wenig habe aber auch nur 3 Blades angeschlossen) und klebte den Kühlkörper mit Thermalpaste. Wollte ihn Konfigurieren und wollte meine Netzwerk IP Range auf die des Miners angleichen, drückte enter und Booom, alle Netzwerke weg. Wireless Controller für Laptop sowie PC musste ich neu Installieren und der Router musste mehrmals in der NAcht neugestartet werden seitens von mir seitens von vodafone mit denen ich per smartphone für teuer Geld über Stunden das PRoblem suchte aber nicht fand :/. Mitten in der letzten Nacht packte mich die Wut und ich rupfte jedes noch so kleine Verbindungskabel auseinander und setzte wirklich alles was technisch im Netzwerk war/ist neu auf und das Schritt für Schritt. Mein S3+ läuft zum Beispiel immer noch nicht, er fuhr runter und seitdem meint er er mined aber Slush sagt "Nö hier kommt nix an". Also auch noch Arbeit mit dem ding welches ich als das zuverlässigste einstufte . Wie dem auch sei laufen drei S1er an einem 100 Watt server netzteil zu je 2x Pci plugs und ein 950 Watt netzteil habe ich im A1 verbaut, welches aber nur 3 Blades ansteuert. zu den Daten die ich mit meiner Erfahrung und momentanen Kenntnis über dieses Teil machen kann, wie folgt: Temperatur: 00:39 07.03.16 8,1°C wobei ich mir an den blades die Finger verbrenne ... Leistung: trotz 3 Blades nur konstant um die 400 Ghash den rest muss ich mir kenntnistechnisch erst erarbeiten, bitte um verständnis das ich grad froh bin das sie laufen. Beinahe ein Daragon Miner Image aufgespielt und wahrscheinlich alles geschrottet.

Wolke i think you're also a German .... DANKE SCHÖN!!!! ))))))))) Er läuft, hab zwar mein netzteil geschrottet aber er lief *stolz wie Oskar Danke Danke Danke euch allen für die Hilfe !

Hey guys
i think i have a simple problem with my CC A1, i can't log in the webinterface because i have no logininfos. I've bought it used via ebay and after it destroyed my router and my whole network (6 miners shutted down because the network was deleted) and a complete new programming of my router i came to the webinterface of the miner BUT now he asks me for a username and a password which i not have, how cvan i get this cleared to come in the miners interface and set the ip to my network? Thanks for every help and Infos.